Horizon Fitness T72 User Manual

TREADMILLUSER'S GUIDE

CONGRATULATIONSand THANKYOUforyourpurchaseof this HorizonSeriestreadmill!

Whetheryour goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill can help you attain it- adding club-quality performance toyour at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to

designing fitness equipment from the inside out, we use only the highest quafity components. It's a commitment we back with one of the strongest frame-to-motor warranty packages in the industry.

Youwantexerciseequipmentthat offers the most comfort,the bestreliability and the highest quality

in its class.

TheHorizonSeriesderivers.

Important Precautions

Assembly

Before You Begin

Treadmill Operation 16

Conditioning Guidelines 26

Troubleshooting & Maintenance 32

Limited Warranty 35

CONTACTINFORMATION Back Panel

i_I _ iii

SAVETHESEINSTRUCTIONS

Readall instructions before using this treadmill. Whenusing an electrical product, basic precautions shouldalwaysbefollowed,including the following:Readaftinstructionsbeforeusingthis treadmill.It isthe

responsibilityof the ownertoensurethat aft usersof this treadmill areadequatelyinformedof aft warnings and precautions.Ifyouhaveanyquestionsafter readingthis manual,contactCustomerTechSupportatthe

numberlisted on the backpanelof this manual

GROUNDINGINSTRUCTIONS

Thisproductmustbegrounded.If a treadmill shouldmalfunctionor breakdown,groundingprovidesa path

of least resistanceforelectricalcurrentto reducetheriskof electricalshock.Thisproductis equippedwith a cordhavingan equipment-groundingconductorand a groundingplug. Theplug must bepluggedinto an appropriateoutlet that is properlyinstafledandgroundedin accordancewithlocal codesand ordinances.

i _-_I_T_ ¸¸¸_ ¸¸ _'_'_ ": ............................_

Improperconnectionof theequipment,groundingconductorcanresult in a risk of

electric shock.Checkwith a qualifiedelectricianorservicemanifyou arein doubt

as to whetherthe productis properlygrounded,Donotmodifytheplug provided

i with the product, if it will not fit the outlet, have properOutletinstalled by a

qualified e!ectrician

This product is for use on a nominal 110-volt circuit

and has a grounding plug that looks like the iflustration

to the right. This product must be used on a dedicated

circuit. Todetermine if you are on a dedicated circuit, shut off thepower to that circuit and observe if any other

devices lose power. If so, move devices to a different

circuit. Note: There are usually multiple outlets on one circuit. It is recommended that the treadmill be used

with a 20 amp circuit for optimal performance.

3-Pole Grounded Outlet

GROUNDED

TREADMILL

POWERCORD

• Never use the treadmill before securing the safety tether clip toyour clothing.

• Ifyou experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Donot wear clothes that might catch on any part of the treadmill.

• Always wear athletic shoes while using this equipment.

• Donot jump on the treadmill.

• Keep power cord away from heated surfaces.

• Donot insert or drop any object into any opening.

• Unplug treadmill before moving or cleaning it. Toclean, wipe surfaces down with soap and slightly damp cloth only, never use solvents. (SeeMAINTENANCE)

• At no time should more than one person be on treadmill while in operation.

• The treadmills should not be used by persons weighing more than 275 pounds (T71) and 300 pounds (T72). Failure to comply will void the warranty.

• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Donot use treadmill in any location that is not temperature controlled, such as but not limited to garages,

porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the treadmill only as described in this manual

OTHERSAFETYTIPSFORYOURTREADMILL

OPERATION

Toreduce the risk of damaging important components on your treadmill, it is strongly

recommended that your treadmill is plugged into a dedicated 20 amp circuit, without the use of an additional extension cord and/or power strip. Failure to comply may void

the warranty.

IMPORTANT..Thetreadmill is not compatible with GFCl-equippedoutlets.

It is essential that_fourtreadmifl is usedonlyindoors,in a climate controlledroom.If your treadmill has been exposedto colder temperaturesor high moistureclimates, it is strongly recommendedthat the treadmill is

warmedup toroomtemperaturebeforefirst time use,Failureto do somay causeprematureelectronicfailure.

IMPORTANT..READTHESESAFETYINSTRUCTIONSBEFOREUSE!

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure aft parts are firmly

tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that

are not tightened and will seemloose and may cause irritating noises. Thereshould be no side-to-side play

in the console masts or any forward and back play in the console assembly or handlebars. If there is any

play in these areas, the treadmill has not been properly assembled. Toprevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

i_I "_ i_ii

UNPACKING

Placethetreadmillcartononalevelflat surface.It is recommendedthatyou place aprotectivecoveringon

your floor. TakeCAUTIONwhenhandling and transporting this unit. Neveropenboxwhenit is onits side.

Oncethe bandingstraps have beenremoved,do notlift or transport this unit unlessit is fully assembled

and in the upright foldedposition, with the lock latch secure.Unpackthe unit whereit will beused. The enclosedtreadmill is equippedwith high-pressureshocksand mayspring openif mishandled.Nevergrab

holdofanyportionof theincline frameandattern_ttofit ormovethe treadmill.FAILURETOFOLLOWTHESE INSTRUCTIONSCOULDRESULTININJURY!

Beforepreceeding,find your treadmill's serialnumber

model name located to the left Of

powerswitchand powercordand enter it in the space

MODELNAMEINTHEBOXESBELOW:

* Referto theSERIALNUMBERandMODELNAMEwhencaring forservice. * Alsoenterthis serialnumberonyourWarrantyCard.

READINGRACK

ON/OFFSWITCH

CIRCUITBREAKER

CONSOLE

(T72SHOWN)

•TOUCHPADPANELWITHBLUEBACK-LITDISPLAY

FAN

SAFETYKEYPLACEMENT

CONSOLEMAST

POWERCORD_

FOOTPLATE(T72) SIDERAIL

TRANSPORTWHEEL_ ROLLERENDCAP

AIRCELL REARROLLER

RUNNINGBELT/ RUNNINGDECK

FOOTLOCKLATCH

MOTORCOVER

ADJUSTMENTBOLTS

[] 4 rnrnAllen Wrench [] 5 rnrnAllen Wrench [] 6 rnrn T-wrench

[] 1Safety_ey

[] 1ConsoleAssembly(locatedundertreadmill deck)

[] 1 Power Cord

[] 4 HardwareBags [] 2 SupportBars/Boots

[] 2 Handlebars

Ifyoi have questioii oi i! thereareanyrnissin6parts, ioitact CustorneiTechSufiiort.

i !

Fora completeexplodeddiafrarn, visit us at www.horizonfitness.corn

iI _ iii

i!l

DONOTCUTSTRAPSUNTILSTEPI-E!* Disassemble box and remove the

cardboardpackaging that is not beneaththe treadmill. Donot attempt to lift the

treadmill at this time. Remove plastic wrap from console masts.

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONEbolt. NOTE:A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

I H_RDW_R£B_ _0011[£1115:i

53.5mm

-_ BOLT(A)

Qty:2

Open HARDWAREBAGI.

Lift LEFTCONSOLEMASTinto uprightposition. Besureto hold

theconsolemastfirmly,asit will not stayin theupright

positiononit's own.

MoveLEFTSIDELINKAGEARM intoposition.InsertBOLT(,4)

andtighten.

Repeatontherightside.

LEFTSIDELINKAGEARM

Nowcut thebandingstraps and removeremainingpackaging material *

NOTE:ii the StraPs have been removed before !ompleting Step1_D and thelinkage arms CanIoi be aligned,

i !fert°theTROIBLESHOOTING secti°n#age 32) in orderto!sti! the treadmillto !! pmperposition: I

Lift theRUNNINGDECKuntil locklatch onsideof treadmill

is fully engaged.

RemoveCONSOLEfrombox andplaceoutof theway,

Lowerthe treadmill RUNNING DECKfrom the folded position

bysteppingonLOCKLATCHon lowerright side.

OpenHARDWAREBAG2.

ARCWASHER(D)

top_ew

BOLT(B) 16mm

Qty:4

Qty:2

LOCKWASHER(C)

Qty:2

ARCWASHER(D)

_ ang/eview

CONSOLECABLE

Withrunning deckin lowered

positbn, place CONSOLE

on upright masts. Slide the brackets that are underneath the

consoleinto the top holes of the upright masts.

PlaceLOCKWASHER(C) and BOLT(D)intofiat sideof LEFT

uprightMASTandlightly tighten.

PlaceARCWASHER(D)andBOLT

(D)into curvedsideofLEFT uprightMASTand lightly tighten.

Gentlyrift RIGHTsideofthe consoletoconnecttheCONSOLE

CABLECarefullytuck wiresin mastto avoiddamage.Note:Do notpinch consolecable.Besure theconsolecableprongsare alignedandtheendsare tightly

seatedinto eachother.

* Besureto tightenboltsafterall arelinedup.

ASSEMBLEDINSTEP2-B_'_

wireswhile assemblingthemasts:

Repeat steps C-D above to

assemble the right side upright mast and console.

G Tightenaft bolts completely.

top_ew

BOLT(E) 12ram

Qty:2

OpenHARDWAREBAG3.

SlidetheHANDLEBAREXTENSION ontothe CONSOLEHANDLEBAR.

Youwill needtoslide the

HANDLEBAREXTENSIONunder

i_I _ iii

BOLT(F) 20mm

Qty:2

ARCWASHER(D)

_ angleview

Qty:2

CONSOLE

HANDLEBAR

HABBLEBAR

BOLT(E/

BOLT (F/

BOHSOLE MAST

theconsoleassemblyplastic by

slightlylifting theplastic in order

toattachtheconnectionbolts.

InsertBOLT(E)into HANDLEBAREXTENSION.

InsertBOLT(F)andARCWASHER (D)throughbottomholeof

HANDLEBAREXTENSIONinto

CONSOLEMAST

E Tightenall bolts.

{D)

F Repeatonotherside.

........................................ L

IIIIIIWIII£ III $00R_'£7115:

BOLT(E) 10mm

Qty:2

Qty: 2

ARCWASHER(D)

_ ang/eview

OpenHARDWAREBAG3.

BOLT(F) 115mm

Qty:2

j CONSOLE

/ ....................................EXTENSION

P!easenotethat forSTEP

"_ ifle bracket=hOUidbeon

theoutsideof the su

HANDLEBAR

BOLT(E)

ARCWASHER(H)

& BOLT(F)

CONSOLEMAST

SlidetheHANDLEBAREXTENSION ontothe CONSOLEHANDLEBAR.

InsertBOLTS(E)into HANDLEBAR EXTENSIONandfully tighten.

Align thelowerpart of the

HANDLEBAREXTENSIONwith the centerof the CONSOLEMAST.

E InsertBOLTS(F)andARCWASHER

(B) throughbottomholesof

HANDLEBAREXTENSIONinto

CONSOLEMASTand fully tighten.

F Repeatonotherside.

i _ ¸

SUPPORTBARS

topview

BOLT(E) 10mm

Qty:8

SUPPORTBARBOOT

OpenHARDWAREBAG4.

SlideSUPPORTBARSontoside

MOUNTINGBRACKETSand

fineup with topMOUNTING

BRACKETS.

Insert2 BOLTS(E)into the topsand2 BOLTS(E)into the

bottomsof eachSUPPORTBAR.

TheBRACKETshouldbeon the

outsideoftheSUPPORTBAR asshownin the drawingto the

left.

_ BOLT(E_

(8TOTAL}

_/_BRACKET

'_ S j/'

POWERSWITCH CIRCUITBREAKER

I_ mRTI,°U,AO_T

SlideSUPPORTBARBOOTS downtocoverBOLTS(E).

Connectpowerplug tothetreadmill

andconnectthecordto a power outlet.Theon/offswitchis located

nexttothepowercord.Flipthis switchto the 'ON'position,sothat

theswitchislit. Youwill heara beep andtheconsolewilllight up.

+ 24 hidden pages