Horizon Fitness 3.3T, 2.3T, 5.3T User Manual
ELITE SERIES
TREADMILL U S E R ’ S GUIDE
FOR MODELS:
2.3T
3.3T
5.3T
2.3T-5.3T_Rev.2.0.indd 1 7/17/06 11:42:52 AM
3
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
CONGRATULATIONS and THANK YOU for your purchase of this Elite Series treadmill!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Elite Series treadmill can
help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-motor warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
The Elite Series delivers.
IN TRODUCTION
Important Precautions
Assembly
Before You Begin
Treadmill Operation
Conditioning Guidelines
Troubleshooting & Maintenance
Limited Warranty
CONTACT INFORMATION
4
6
11
14
25
31
34
Back Panel
TA B L E OF CO N T EN T S
2.3T-5.3T_Rev.2.0.indd 2-3 7/17/06 11:42:52 AM
4
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
5
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.
To reduce the risk of burns, fire, electrical shock or injury to persons:
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness
of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Always wear athletic shoes while using this equipment.
• Do not jump on the treadmill.
• Keep power cord away from heated surfaces.
• Do not insert or drop any object into any opening.
• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• At no time should more than one person be on treadmill while in operation.
• The treadmills should not be used by persons weighing more than 300 pounds (2.3T), 350 pounds (3.3T)
and 400 pounds (5.3T). Failure to comply will void the warranty.
• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental,
school or institutional setting. Failure to comply will void the warranty.
• Do not use treadmill in any location that is not temperature controlled, such as but not limited to garages,
porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the treadmill only as described in this manual.
OTHER SAFETY TIPS FOR YOUR TREADMILL
OPERATION
To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 20 amp circuit, without
the use of an additional extension cord and/or power strip. Failure to comply may void
the warranty.
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
SAVE THESE INSTRUCTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 110-volt circuit
and has a grounding plug that looks like the illustration
to the right. This product must be used on a dedicated
circuit. To determine if you are on a dedicated circuit,
shut off the power to that circuit and observe if any other
devices lose power. If so, move devices to a different
circuit. Note: There are usually multiple outlets on one
circuit. It is recommended that the treadmill be used
with a 20 amp circuit for optimal performance.
IM PORTA NT PR EC AUTIONS
WARNING
WARNING
WARNING
WARNING
3-Pole Grounded Outlet
GROUNDED
TREADMILL
POWER CORD
2.3T-5.3T_Rev.2.0.indd 4-5 7/17/06 11:42:55 AM
6
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
7
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
AS SEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab
hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!
Before proceeding, find your treadmill’s serial number
and model name located to the left of the on/off
power switch and power cord and enter it in the space
provided below.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER :
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
WATERBOTTLE HOLDER
TOUCHPAD PANEL WITH LED WINDOWS
READING RACK
GRIP PULSE HAND RAILS
SAFETY KEY PLACEMENT
HAND RAILS
MOTOR COVER
SIDE RAIL
ROLLER END CAP
REAR ROLLER ADJUSTMENT BOLTS
CONSOLE
CONSOLE SKIRT
CONSOLE MAST
CIRCUIT BREAKER
ON/OFF SWITCH
POWER CORD
WHEEL LOCKS
SIDE COVER
TRANSPORT WHEEL
RUNNING BELT / RUNNING DECK
c 1 Power Cord
c 1 Safety Key
c 1 Console Skirt
c 1 Console Assembly
c Left and Right Side Covers
c Left and Right Console Masts
c Left and Right Hand Rails (3.3T & 5.3T only)
c 5 Hardware Bags (2.3T has 4 Hardware Bags)
NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to
prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
2.3T - 5.3T ASSEMBLY
PARTS TOOLS (INCLUDED)
c 5mm Allen Wrench
c 6mm T-Wrench (2.3T)
c 8mm T-Wrench (3.3T & 5.3T)
c Flat Wrench
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
WARNING
2.3T-5.3T_Rev.2.0.indd 6-7 7/17/06 11:42:57 AM
8
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY S T E P 3
BOLT (C)
CONSOLE MAST
CONSOLE
CONSOLE WIRES
BOLT (C)
50 mm
Qty: 2
HARDWARE BAG 3 CONTENTS :
ASSEMBLY S T E P 4
HAND RAIL
BASE FRAME
BOLTS (A)
GRIP PULSE
HAND RAILS
BOLT (A)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
A Open HARDWARE BAG 1.
B Connect CONSOLE WIRES.
C Attach CONSOLE MASTS to BASE
FRAME using 6 BOLTS (A).
D Secure and tighten all bolts.
NOTE: Do not pinch the wires.
ASSEMBLY S T E P 1
2.3T – 5.3T ASSEMBLY
A Open HARDWARE BAG 2.
B Place the console upside down on
a padded surface.
C Attach the CONSOLE SKIRT by
partially inserting 2 SCREWS (B)
in the two inner attachment holes.
D Align the CONSOLE SKIRT and
CONSOLE SHELL SEAM. Partially
insert SCREW (B) and repeat for
other side.
E Fully tighten all screws.
ASSEMBLY S T E P 2
STEP D : UPSIDE DOWN VIEW OF CONS OLE
BOLTS (A)
CONSOLE MAST
CONSOLE WIRES
CONSOLE SKIRT
CONSOLE
SCREWS (B)
CONSOLE SKIRT
SCREWS (B)
CONSOLE SHELL SEAM
BOLT (A)
15 mm
Qty: 6
HARDWARE BAG 1 CONTENTS :
SCREW (B)
12 mm
Qty: 4
HARDWARE BAG 2 CONTENTS :
A Open HARDWARE BAG 3.
B Connect CONSOLE WIRES.
C Attach CONSOLE to CONSOLE
MASTS using 2 BOLTS (C).
D Secure and tighten bolts.
NOTE: Do not pinch the wires.
3.3T & 5.3T models only:
A Open HARDWARE BAG 4.
B Attach left and right HAND
RAILS to GRIP PULSE HAND
RAILS and BASE FRAME using
4 BOLTS (A).
NOTE: 2.3T models do not
have hand rails and therefore
will NOT include HARDWARE
BAG 4 in the parts box.
2.3T-5.3T_Rev.2.0.indd 8-9 7/17/06 11:43:05 AM
10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
BE FORE YOU BEGIN
CONGRATULATIONS! on choosing your treadmill. You’ve taken an important step in developing and
sustaining an exercise program! Your treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your treadmill in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
LOCATION OF THE TREADMILL
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt.
Place your feet on the side rails before starting the treadmill. Start
walking on the belt only after the belt has begun to move. Never start the
treadmill at a fast running speed and attempt to jump on!
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation
of the safety key every 2 weeks.
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT
COME OFF YOUR CLOTHING.
WARNING
3 feet
6 feet
3 feet
1 foot
WARNING
YOU’RE FINISHED!
ASSEMBLY S T E P 5
SIDE COVERS
SCREWS (D)
BASE FRAME
SCREW (D)
12 mm
Qty: 6
HARDWARE BAG 5 CONTENTS :
Open HARDWARE BAG 5.
Lift RUNNING DECK to upright
position.
Attach SIDE COVERS to BASE
FRAME using 6 SCREWS (D).
A
B
C
2.3T-5.3T_Rev.2.0.indd 10-11 7/17/06 11:43:10 AM
Loading...