EKO MOBILE S.r.l. declares this mobile phone (HM-501), in this instruction manual, is
manufactured according to the essential requirements and other important disposition
according to the Directive 1999/5 CE (R&TTE) and 89/336/CEE.
The mobile has been manufactured according to the following rules:
- GSM ( Radio Spectro) Standard: EN 301 511 e 3GPP 51.010-1
- EMC (Electromagnetic compatibily). Standard: EN 301 489-1 e EN 301489-7
- SAFETY (Electric security and SAR). Standard: EN 60950 e EN 5036
On demand it is possible to refer a copy of the conformity declaration by Eko Mobile
S.r.l. S.U., Crystal Palace - Via Cefalonia , 70 25124 Brescia.
2
0678
It is possible to use this appliance in all the countries of the European Community and
in all the countries out of the European Community where you can find a net GSM
900/1800 MHz.
Eko Mobile S.r.l. .
All the brands in this instruction manual are brand-names or o wners’ exclusive
proprietary.
Eko Mobile S.r.l. has the authority to make any update and modify to develop the
products in the instruction manual, without any notice
Eko Mobile S.r.l. can not be held responsible for the loss of profits, data or any
incidental, indirect or subsequent damage caused in whatever manner.
Eko Mobile S.r.l. can not be held responsible for any possible printing imprecision or
mistake about the content of the current user manual. Furthermore, the revision and
the revocation of it are allowed without notice from Eko Mobile S.r.l.
The use, the copy, the revision or the distribution of the current user manual or any
part of it are forbidden without the authorization of Eko Mobile S.r.l.
All Hop Mobile phones are protected by patent: N° IT 0001327335/2001
This symbol shows that the appliance is manufactured
according to the requirements required by the new
disposition of the European Community for the protection
of the environment (2002/95/EC, 2002/96/EC,
2003/108/EC). This regulation isn’t applied not only to this
device but also to all the accessories marked with this
symbol. Do not treat these products just as household
undifferentiated urban litter; the products must be disposed
by specialized collection centers. Please contact your local
city office. If you don’t dispose of the products f ollowing the
above instructions, you will be answerable according to the
rucles in force.
Hop Mobile is a brand-name of exclusive proprietary of
Thanks for choosing this color digital mobile phone.
With this user manual, you can understand the
operation of the mobile phone and enjoy its perfect
function and simple operation.
This color screen mobile phone is designed for
GSM/GPRS network. Besides basic messaging function, it
also provides various practical functions, including
predictive English input, 64-chord ringtone, clock/alarm
clock, schedule power on/off, calendar, T-flash and
keypad lock, to make your work and entertainment
more convenient. In addition, the phone utilizes
personalized human-computer interface and satisfies
your different requirements with its perfect functions.
This color screen mobile phone accords with GSM/GPRS
technical specification and is approved by domestic and
international authoritative organizations.The contents
are subject to changes without prior notice.
1.2 Safety precautions
If your mobile phone is lost or stolen, please
inform local telecommunication department or
distributor to disable the mobile phone and SIM
7
card. It will prevent the economic loss caused by
illegal operation.
When you contact telecommunication department,
they will ask you the IMEI number (It is printed on
the label in the rear of the mobile phone and you
will find it after removing the battery). Please
write down this number and keep it properly for
future use.
To avoid illegal operation, please take the
preventative measures, for example:
o Set PIN code of the SIM card and modify in
time.
o Do not put the mobile phone at salient places
before leaving your car. You'd better take it
with you or lock it in the luggage.
o Set call barring.
1.3 Safety warnings and
precautions
Please read these precautions carefully before using this
mobile phone to ensure safe and correct operation.
1.3.1 Precautions of using mobile phone
Only approved battery and charger can be used. It
may cause battery leakage, overheating, explosion
and fire if you use other products.
Do not impact, shock or throw the mobile phone to
avoid fault and fire.
8
Do not put the battery, mobile phone and charger
in microwave oven or high pressure equipment,
otherwise it may damage the circuit and cause
fire.
Do not use the mobile phone near places wi th
inflammable and explosive gas; otherwise it may
cause mobile phone fault and fire.
Do not put the mobile phone at places with high
temperature, humidity or much dust, otherwise it
may cause fault.
Put the mobile phone out of children's reach to
avoid children taking it as a toy and getting hurt.
Do not put the mobile phone on a surface that is
not flat or stable to avoid fault or damage caused
by falling.
In places near fuels, chemical products or
explosives, please follow the regulation and turn
off your mobile phone.
Please follow your local laws and regulations of
using mobile phone when you are driving. If you
need to use mobile phone when you are driving,
please pay attention to the road condition and
precautions of using mobile phone.
Please turn off your mobile phone in airplane,
hospital or other places where using mobile phone
is prohibited. The mobile phone will affect the
normal operation of electronic equipment and
medical instrument. Please follow correlative
regulations when you use mobile phone at these
places. This mobile phone has schedule power
on/off function. Please check the alarm clock
9
setting to make sure the mobile phone won’t be
power on automatically in airplane.
Do not use the mobile phone at places with weak
signals or near high precision electronic
equipment. The radio wave interference may
cause misoperation and other problems of
electronic equipment. Pay special attention when
you are near the following equipment: hearing aid,
pace maker and other medical electronic
equipment, fire detector, auto door and other
automatic control devices. Please consult the
manufacturer or local distributor for the influence
of mobile phone on pace maker and other medical
electronic devices.
Do not press the LCD screen hard or knock at other
objects with it; otherwise the LCD board may be
damaged and LCD liquid may leak. It may cause
blindness if the liquid comes into eyes. Please use
clean water to clean eyes immediately (do not
knead your eyes) and go to see your doctor.
Do not disassemble or refit the mobile phone,
otherwise it may cause mobile phone damage,
electricity leakage and circuit fault.
Under few conditions, the mobile phone has
negative effects on the electronic equipment when
it is used in some models of cars. Do not use the
mobile phone at this moment in order to guarantee
your safety.
Do not use needle, pen head or other sharp objects
to press keys, otherwise it may damage the mobile
phone or cause misoperation.
10
Do not use the mobile phone if the antenna is
damaged, otherwise it may hurt your body.
Do not put the mobile phone too close to magnetic
cards or other magnetic objects. The radiative
wave of the mobile phone may eliminate the
information saved in floppy disk, prepaid card and
credit card.
Put the drawing pins and other small metal objects
away from the headphone of the mobile phone.
The loudspeaker is magnetic during working and
will magnetize these small metal objects; it may
hurt human body or damage the mobile phone
thereby.
Do not make the mobile phone moistened; it may
cause overheating, electricity leakage and fault if
water or other liquids enter the mobile phone.
1.3.2 Precautions of using battery
Do not put the battery in fire; otherwise it may
cause fire and explosion.
Do not push by force when installing battery;
otherwise it may cause liquid leakage,
overheating, explosion and fire.
Do not use electric wire, needle or other metal
objects to short circuit the battery, and also do
not put the battery together with necklace and
other metal objects, otherwise it may cause liquid
leakage, overheating, explosion and fire.
Do not weld the battery ends, otherwise it may
cause liquid leakage, overheat, explosion and fire.
11
It may cause blindness if the battery liquid comes
into eyes. Do not knead your eyes at this moment.
Please use clean water to clean and go to see your
doctor immediately.
Do not disassemble or refit the battery, otherwise
it may cause liquid leakage, overheating, explosion
and fire.
Do not use or put the battery near fire, heater or
other places with high temperature, otherwise it
may cause liquid leakage, overheating, explosion
and fire.
If the battery has temperature rising,
discoloration, distortion or other abnormal
phenomenon in the process of using, charging or
storage, please stop using the battery and change
a new one.
It may burn your skin if the battery liquid contacts
your skin or clothes. Please use clean water to
clean and go to see your doctor immediately.
If there is liquid leakage or abnormal smell from
the battery, please take it away from fire to avoid
from fire and explosion.
Do not make the battery moistened; otherwise it
may cause overheating, smoking and erosion of the
battery.
Do not use or put the battery at places where it is
irradiated by sunshine directly or near car,
otherwise it may cause liquid leakage and
overheating, and debase its performance and
shorten its service life.
Do not charge continuously for more than 24 hours.
12
1.3.3 Precautions of using charger
Please use 220V AC power supply. It may cause
electricity leakage, fire and damage the mobile
phone and charger if you use other voltage.
Charger short circuit is prohibited, otherwise it
may cause electric shock, smoking and damage the
charger.
Do not use the charger if the power cord is
damaged, otherwise it may cause fire and electric
shock.
Please clean the dust on the outlet in time.
Do not put water container beside the charger to
avoid overheating, electricity leakage and fault of
the charger caused by splashed water.
If the charger contacts water or other liquids,
please cut off the power supply immediately to
avoid overheating, fire, electric shock and charger
fault.
Do not disassemble or refit the charger, otherwise
it may cause body hurt, electric shock, fire and
damage the charger.
Do not use the charger in bathroom or other place
with high humidity, otherwise it may electric
shock, fire and damage the charger.
Do not touch the charger, power cord and outlet
with wet hands; otherwise it may cause electric
shock.
Do not put heavy objects on the power cord or
refit the power cord; otherwise it may cause
electric shock and fire.
13
Please pull out the plug from outlet before
cleaning and maintenance.
Please hold the charger when pulling out the plug
and it may damage the power cord and cause
electric shock and fire if you pull the power cord.
1.3.4 Cleaning and maintenance
The mobile phone, battery and charger are not
waterproof. Do not use them in bathroom or other
places with high humidity and also avoid being
drenched with rain.
Use soft cloth to clean the mobile phone, battery
and charger.
Do not use alcohol, diluents or benzene solution to
clean the mobile phone.
Out let with dirt may cause bad contact and power
off, and can’t charge thereby. Please clean
regularly.
1.3.5 General
Mobile phone
Please use this mobile phone in the environment
with temperature between 5°C and 40°C and
humidity between 35% and 85%.
Try to use this mobile phone at places away from
normal telephone, TV set, radio and OA equipment
to avoid affecting the performance of these
devices and mobile phone.
Battery
14
Put the battery at places with good ventilation and
no direct sunshine irradiation.
The service life of mobile phone battery is limited.
The using time of battery will be shortened
gradually after frequent charging. If the charging is
invalid for several times, it indicates that the
service life of the battery has reached its end and
you need to change a new battery of appointed
model.
Do not drop used battery into common domestic
refuse. Please follow local regulations if the
disposal of used battery is stipulated clearly.
Charger
Do not charge at the following places:
o with direct sunshine irradiation;
o environment temperature lower than 5°C o r
higher than 40°C;
o with moisture, too much dust or vibration
(may cause fault);
o near TV set, radio or other electric apparatus
(may affect video and audio quality).
15
2. Before using
Icone
Descrizione
Indicate the intensity of network
signal.
GPRS is available.
Vibrator is activated.
New message.
Keypad is locked.
Indicate battery status.
Alarm clock is set and activated.
Earphone is inserted.
2.1 Parts name and description
2.1.1 Icons
In the standby interface, the following icons may show
up and their description is as follows:
16
New service message.
2.2 Keys description
Number keys
Input numbers and characters; customize number keys
2-9 as the shortcuts of quick dial.
Right soft key
Execute the functions displayed in lower right corner of
the screen.
Left soft key
Execute the functions displayed in lower left corner of
the screen.
Left/right navigation key
Move cursor to the left or right while editing; in standby
state, press the Left key to access [Profiles] and press
the Right key to access [Tone setup]; in certain
submenus, press the Left key to access selected menu
and press the Right key return to previous menu.
Up/down navigation key
Scroll to browse names, telephone numbers, short
messages and submenus; move cursor up or down while
editing; in standby state, press the Up key to access
[Audio player] and press t he Down key to access
[Alarm].
Key *
17
Input special symbols and Chinese punctuation; in
standby state, press and hold this key to switch among
+, P and W.
OK key
Standby enter the main menu. Long this key card to
open \ close the flashlight.
# key
Press this key to input # or switch input methods; in
standby state, press and hold this key to switch
between Silent and General profiles.
Note: In this manual, press a key means to press the key
and release; press and hold a key means t o press the
key and hold for no less than 2 seconds.
2.3 Battery
The battery in original state has about 50% electricity
quantity and you can use it after unpacki ng. It performs
best after full charge/discharge for the first three
times.
To remove and install the battery:
To remove the battery: 1- Push the back cover
downwards; 2- lift the battery from the rear and
remove it.
To install the battery: 1- insert the battery; 2- put
on the mobile phone cover.
18
2.4 Charging the battery
Connect the power supply of charger.
Insert the plug of the charger into the bottom of
mobile phone (keep the surface with arrow
upwards).
Then, the electricity quantity indicator on upper
right corner of the screen will be flashing
circularly; if the mobile phone is power off when
being charged, a charging indicator image will
appear on the screen which indicates the battery
is being charged. If the mobile phone is still used
when battery is low, the charging indicator will
appear after the charging has started for a while.
If the battery status indicator on upper right
corner of the screen is complete and won’t flash,
the charging is finished. If the mobile phone is
power off, the image which indicates that charging
is finished will be displayed on the screen. This
course may cost 3-4 hours. It is normal that the
battery, mobile phone and charger get hot in
charging process.
Disconnect the AC outlet from mobile phone and
charger when the charging is finished.
Note:
Use charger approved by manufacturer to charge
at ventilated places with temperature between
5°C and 40°C.It may bring danger if you use
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.