Hoover U5134900 Owner’s Manual

HOOVER,Upright
Owner's Manual
with Removable Tool Rack
IIIIII
IIIIII IIIIIII
ENGLISH 4 pp.1-13 ESPANOL '-,),pag. 14_20
[::RAN(_AIS _ p. 21-27
Read this manual before
operating the cleaner
Fill in and retain
The model and serial number are located on the bottom of the cleaner.
For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
Your cleaner is model
and has serial number_ It is suggested that you attach your sales receipt to this owner's manual.
Verification of date of purchase may be required for warranty service of your
HOOVER product.
Save!
Index
Assembling Cleaner .......................... 3-6
Cleaning Effectiveness
Per Amp Rating .................................. 12
How To Use
Cleaner Description .......................... 6
Cleaning Tools .................................. 8
Upright Cleaner .............................. 7-8
If You Have a Problem ........................ 12
Clearing Blockages ........................ 13
Important Safeguards .......................... 2
Maintenance
Authorized Service .......................... 12
Lubrication ...................................... 12
Replacing Belt ............................ 10-11
Replacing Brush Roll ...................... II
Replacing Headlight ........................ 10
Replacing Filter Bag ........................ 9
Replacing Final Filter .................. 9-10
Warranty .............................................. 13
© 1999 The Hoover Company
www.hoover.com
Important Safeguards
When using an electrical appliance, always follow
basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Warning: To reduce the risk of fire, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Close supervision is necessary when any appliance is used by or near children.
Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.
Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and other moving parts. Do not operate cleaner in bare feet or
when wearing open toe shoes or sandals.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Do not use to pick up flammable or combustible materials such as gasoline or fine wood sandings or use in areas where they may be present.
Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner
and the bag.
Always turn off this appliance before connecting or disconnecting hose.
Do not use without dust bag or filters in place. Change bag frequently when picking
up very fine materials such as powder.
Use extra care when cleaning on stairs.
Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, or anything that may reduce air flow.
Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord
around sharp edges or comers. Do not run appliance over cord. Keep cord away from heated surfaces.
Always disconnect cord from electrical outlet before servicing the cleaner.
Unplug cleaner when not in use. Turn off all controls before unplugging.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never
handle plug or appliance with wet hands.
The use of an extension cord is not recommended.
Do not use with damaged cord or plug. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover
Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).
Use vacuum cleaner only for its intended use as described in the instructions.
Use only attachments recommended by The Hoover Company; others may cause
hazards.
Save these instructions!
it is extremely important to
read and follow all the
instruction steps in order.
The assembled cleaner will look like this drawing.
If you need assistance with any step of the assembly or operation,
call:
1-800-944-9200 for an automated referral of authorized
service outlet locations (U.S. only) OR
1-330-499-9499 to speak with a representative in our
Consumer Response Center OR
Visit us on-line at www.hoover.com to find the
service outlet nearest you (click on the 'Service" button).
Carton contents
Remove all parts from carton and identify each item shown.
Note that some of the items are
shipped together in the sealed
bag with the owner's manual.
B
C
E
A. Upper handle
B. Bag compartment assembly
C.Cord
D. Tool caddy E. Cleaner base
G
F
I
F. Handle bolt and nut packet
(One extra nut included)
G. Upper handle screws (2)
H. Paper filter bag
L Hose, cleaning tools, crevice
wand and extension wand
Note:The green or white switch
lock (A) near the ON/OFF switch on
the back of the bag compartment assembly, helps in assembling your cleaner.
Assembly can be continued if the
switch lock is missing. However, do not remove the switch lock
until assembly is completed.
Step 1 Assemble handle
Removing bag door
Pull bag door latch forward and remove bag door.
Set bag door aside.
Attaching cord
Slide cord protector (AA) away
from rectangular end of cord.
Insert large rectangular end of cord
through opening in back of bag compartment.
With side marked "UP" visible, insert
end into pocket in the bottom of the bag compartment assembly.
81ide cord protector toward top of
bag assembly and slide through opening.
Attaching bag compart.
ment assembly
Remove cardboard protector from bottom of bag compartment assem- b I y
With bag compartment in the verti- cal position, rotate cord protector (B) on cord so that the arrow is on
the side.
Press protector into the slot (C).
Protector should be pointing down-
ward when assembly is in the verti-
cle position.
Pull cord tight.
With opening of bag assembly toward the front, place it down onto
the extension on cleaner base.
Rock handle side to side while
pushing down firmly. Extra push- ing effort may be required. Make
sure handle is pushed down com-
pletely. Push bolt into hole (D) on lower front
of assembly.
Press cord into place at each of the
three slots indicated.
Do not plug cleaner in until
assembly is totally complete.
Place nut in recessed area at back
of assembly. Hold nut in place while tightening bolt securely with a
screwdriver. Only one nut is needed on this
model. The extra nut is not required but has been provided for your con-
venience.
1
"*"%1 E
IF'f•
Attaching upper handle
Slide upper handle onto assembly,
as shown, until the handle snaps
into position•
Push bag firmly onto tube•
Tuck top and bottom of bag into bag compartment.
Insert the two s_ews at_thefront of the handle to secure it-Onto the assembly. ,;. :
Tighten the screws.
=l:i
To replace bag door, insert the 2 tabs (F) on bottom of door into the 2
slots on bag compartment.
Make sure all edges of bag are
completely inside the bag com- partment.
Close door.
Attaching filter bag
Align opening in bag with dirt tube (E) inside bag compartment.
Remove green or white switch lock
(A) in back of the cleaner.
Step 2 Attach tool
caddy
The tool caddy is designed to be
used either on the cleaner for easy
access to the tools or if the tools are
not going to be used, it can be removed and hung for storage.
If you do not want to attach the
caddy to the cleaner at this time,
proceed to Step 3 for proper tool placement on the. caddy.
|JlrA
Slide edge of tool caddy down into
the channel on the back of the cleaner.
Lift caddy off the cleaner to remove
it for storage.
Step 3 Position tools on caddy
Insert hose connector into bottom of caddy.
Drape the hose over top and plug it into the opposite end until it snaps into place
Continued -# 5
Loading...
+ 9 hidden pages