Hoover Quiet Owner's Manual
Fill in and retain!
The HOOVER vacuum cleaner you have just purchased is a combination cleaner. It has a motorized power nozzle for carpet and
floor cleaning and has cleaning tools for above the floor cleaning.
Your cleaner is a model no.
and has a serial number
For your personal records, please enter the model number and serial
number in the spaces provided above and retain in a safe place.
The model number and serial number appear on the bottom of the
cleaner.
Save!
Index
Assembling Cleaner
Cleaner Description
Cleaning Tools
HowToUse..
Important Safeguards
Lubrication
Maintenance
Replacing Agitator Brushes
Replacing Bag
Replacing Belt
Secondary Filter
Storage
To Clean Stairs
User Check List
..............................................
.........................................
...........................................
....................................
....................................
........................................
..................................
.......................................
.......................................
.....................................
........................................
........................................
............................
0
The
Hoover
Company
1975, 1978, 1980
5-8
34
8-9
7-8
2
17
16-17
11-12
13-15
13
10
10
18
i
1
i
l
Read all instructions.
l
Warning: Electric shock could occur if used outdoors or on wet
surfaces.
l
Close supervision is necessary when any appliance is used by or
near children. Do not allow vacuum cleaner to be used as
a
toy
or to run unattended at any time.
l
Keep hands, feet, loose clothing, and hair away from rotating
agitator. Do not operate the cleaner in bare feet
or
when wear-
ing open toe shoes or sandals.
l
Don’t run power nozzle over cord. It may damage insulation.
l
Do not use cleaner to pick up matches, or live ashes and
cigarette butts.
l
Avoid picking up hard, sharp objects with the cleaner. They
may damage the cleaner and the bag.
l
Unplug cleaner when not in use. Turn machine off at switch
before unplugging.
l
Always disconnect cord from electrical outlet before servicing
the cleaner.
l
Change bag frequently when picking up very fine materials
such as powder.
l
Grasp the plug to disconnect from wall outlet to avoid damage
to cord, plug, prongs, or receptacle.
l
The use of an extension cord is not recommended.
l
If cleaner is in disrepair, do not attempt to operate.
l
Have repairs made by the qualified personnel at Hoover Factory
Service Centers or Authorized Hoover Warranty Service
Dealers.
l
Use vacuum cleaner only for its intended use as described in
the instructions. The use of attachments not recommended by
the appliance manufacturer may cause hazards.
Save these instructions!
2
UNPACKING
Unpack the cleaner from the
carton and identify the parts
shown. Remove and dispose
of the cardboard packing.
A. Canister cleaner
B. Power nozzle
C. Throw away bag
D. Extension wands, cleaning
tools and hose
D
The cleaner assembled will
look like the drawing below.
1.
Wall Floor Brush
2.
Power Nozzle automatically adjusts to different carpet pile heights.
3.
Casters provide easy towing; pull cleaner using hose to guide the
cleaner over carpet, area rugs and door sills.
4.
Hose Cord Connection to Cleaner
is made by plugging hose cord into
cleaner base at receptacle.
5.
ON-OFF Switch is a convenient toe operated switch near the front of
the cleaner.
6.
Carrying Handle
7.
Furniture Guard
8.
Cord Storage Hook
9.
Extension Wands connect to hose and power nozzle or cleaning tools.
10.
Spring Latch
11.
Crevice Tool
12.
Multi-Purpose Brush
locks extension wands.
Cover Latch
13.
14.
Suction Regulator should be closed for full suction. Open regulator for
easy cleaning of some types of carpet, lightweight flexible rugs and lightweight draperies.
Cord Clips clip nozzle cord to extension wands.
15.
Nozzle Cord Connection to Handle
16.
is made by plugging nozzle cord
into receptacle underneath the handle.
Plastic Latch Ring
17.
rotates to lock handle to extension wands or clean-
ing tools.
Handle is on end of hose for use with extension wands or cleaning tools.
18.
Operate cleaner only at voltage specified on data plate on bottom
of cleaner.
4
How to assemble
1. Connect hose
To connect hose, insert hose into
opening of cleaner lining up the arrow on the hose with the dot on
the cleaner. Turn the hose clockwise until it lines up with the bar
on the cleaner and latch locks into
place.
When the hose is attached properly, the hose cord plug will reach to
the receptacle on the cleaner.
Insert the plug firmly and as deep
into the receptacle as possible.
LATCH
7T?Zff-
m&
To disconnect hose, first remove
hose cord plug from receptacle.
Then, depress latch away from
hose connection opening in clean-
er. While holding latch, turn the
hose counterclockwise until the
arrow lines up with dot on the
cleaner.
2. Attach power nozzle
Attach power nozzle at the end of
the straight wand by fitting the
button projection on the nozzle
connector into the opening at the
end of the wand. Be sure the nozzle is locked in place.
To release, press down on the
center of the spring latch and
remove nozzle.
CONNECTOR
5
Loading...