Hoover HWD020 Instructions Manual

1'~l

2. WARNING!

24KG

3.

4.Moist Ooth

~

5.
1"\ Shake

U-0

m

Storage
Store the vacuum cleaner in a cool dry place. It is
recommended to empty and clean the drum before storing
fora lengthyperiodoftime.

Service
If service becomes necessarywithinthe warrantyperiod,the

appliance should be returned to an approved Amalgamated

Appliances (Pty) Ltd Service Centre. Servicing outside the
warranty period is still available however this will be
chargeable. Use only recommended spare parts and
accessories on the vacuum cleaner for maximumefficiency.

4.

PLEASE AFFIX YOUR PROOF OF PURCHASEIRECEIPT HERE

IN THE EVENT OF A CLAIM UNDER WARRANTY THIS

RECEIPT MUST BE PRODUCED.

WARRANTY

Amalgamated Appliances (Pty) Limited ("the Supplier") WaITantsto the
original purchaser of this product ("the Customer") that this product will
be ftee of defects in material and workmanship which under normal,
personal, family or household purpose manifest themselves within aperiod
of 365 days &om the date of purchase or in respect of commercial or
professional purposes, manifest themselves within a period of 90 days
ftom the date of purchase. Any claim in terms of the WaITantymust be
supported by a proof of purchase. If such proof is not available, then
notwithstanding anything to the contrary herein, the Supplier's normal
charge for service and/or spares will be payable by the Customer upon
collection of the repaired product. If a claim is made in terms of the
aforesaid WaITantywithin the first 7 days ftom the date of purchase, the
faulty product will be exchanged (provided that the product is in its
original packaging with all accessories). Failing return of the product
within 7 days, the Supplier's liability shall be limited on return to the
Supplier of the product orparts thereof, tothe replacement or repair (in the

sole discretion of the Supplier, or its duly authorised service dealer) of the
product to eliminate any defect in workmanship or materials found to be
due exclusively to any acts or omissions on the parts of the Suppliers, of
which defects the Supplier shall have been notified in writing by the
Customer within the aforesaid waITanty period. The waITanty provided
herein andthe obligations ofthe Supplier as aforesaid are in lieuof, and the
Customer waives, all other waITanties,guarantees, conditions or liabilities,
express or implied, arising by law or otherwise, including without limita-
tion, any obligation of the Supplier in respect of any injury, loss or damage
(direct, indirect or consequential) arising out of the use of, or inability to
use, this product and whether or not occasioned by the Supplier's
negligence (gross or otherwise) or any act or omission on its part. The
WaITantydoes not include and will not be construed to cover products
damaged as a result of disaster, misuse, abuse or any non-authorised
modification of the product. The waITantydoes not include replacement of
light bulbs, heater bars, paper bags or any glass, plastic bowl orjug or other
expendables. During the waITantyperiod the product should be taken to a
service centre of the Supplier or one of its duly authorised service agents.
The Supplier neither assumes nor authorises any other person to assume
for it, any additional liability in connection with the sale or servicing of its

products.

AMALGAMATED APPLIANCES (PTY) LTD

29,HERONMEREROAD POBOX39186
BOOYSENS,JOHANNESBURG BOOYSENS
2016 2016

TEL:[phone]
FAX:[phone]

CAPE TOWN

DURBAN

TEL[phone]

TEL [phone]

5.

INSTRUCTIONS/wARRANTY

MODEL: HWD020

WET,DR~ BLOWTRIO-VAC

~~ ~ 4 Q""''''

dq-t:JS;-"2~~~~

)

Operating Instructions.

Important Safety Instructions.
Before using the vacuum cleaner, always read the operating
instructions and keep them readily available.

Purpose and Intended Use.

The vacuum cleaner described in this operating manual is

suitable for private use, e.g. household, hobby workshop, car

cleaning and sucking up dust and liquids.

Name and Parts Location.

1. Castor wheels

2. Drum

3. Latch

4. Cord Storage

5. Motor housing

6. ON/OFF Switch

7. Handle

8. Flexi hose

9. Extension tube 10

10. Carpet / Floor nozzle

11. Furniture brush

12. Crevice tool 1

13. Blow outlet

I? ~12 ~"

The followingmaterials should not be picked up by the
vacuumcleaner.

13

5

/3

· Hazardous dust

· Hot materials (burning cigarettes,hot ash, etc.)

· Flammable, explosiveoraggressive liquids (e.g. petrol,
solvents, acids, alkalis, etc.)

· Flammable or explosive dust (e.g. magnesiumor
aluminiumdust,etc.)

BeforeStart-up.
. Ensure that the voltage shown on the rating plate

correspondsto the voltageofthe local Mains power supply.

· It is recommended that the vacuum cleaner should be
connectedviaa residentialcurrentcircuit breaker.

· Inspect the powercord regularlyto detectsignsofdamage,
e.g. cracks or ageing. A damaged power cord must be
replaced by an authorisedperson. Never use th-evacuum
cleaner ifthe filteris damaged.

1.

Operating your Hoover HWD 020Wet/Dryvacuum cleaner:

I. Unwind the power supply cord ITomthe cord storage

andplugintothepower supply socketoutlet.

2. Switch the vacuum cleaner ON by depressing the
ON/OFFswitch.

3. A suction regulator is located on the hose handle.
To activate simply slide the regulator open to reduce
the level of suctionrequired. The suctionregulator
shouldbekeptin the closed position.

4. The suctionpowerwill reduce and stop as the drum
fillsup. It isrecommendedto empty the drumon a
regularbasis.

5. To switchthe vacuum OFF depressthe ON/OFFswitch
againandthenremoveITomthe mainspowersupply.

PowerCord

1.

3.

2.

Pickingup Liquids.
Before liquids are picked up, always remove the filter bag.
If foam developsor liquid emerges, stop work immediately
andemptythe drum.

~

~J

~-~~

#~

2.

Blow Function.

1. Unwind the power supply cord ITomthe cord storage.

2. Attach the flexi hose to the blow outlet and attach the
desired nozzle to the flexi hose.

3. Switch the vacuum cleaner ON by depressing the
ON/OFF switch.

4. To switch the vacuum cleaner OFF depress the
ON/OFF switch again and then remove ITomthe mains
power supply.

1.

~!

20~

'oB,

Maintenance, Cleaning and Repair.

1. Disconnect the plug ITomthe mains power supply

beforecleaning.

2. Take care when emptying the drum, as when full it
couldweighupto 24 kg.

3. Releasethetwo latcheslocatedonthe drumin order to
removethe motorhousing.

4. Emptythe drum using the handle grip located on the
undersideofthe drum.Clean with a warm moistcloth

and buff dry. Do not use harsh abrasivesor other
cleaningaidsto cleanthe vacuumcleaner.

5. Clean the filterperiodically by gently beating it over
a rubbish bin. If cleaning is not done the suction
power of the vacuum will decrease.

6. After cleaning the vacuum cleaner, placethe motor

housing on to the drumand securethe two latches

back into place.For correct assemblyofmotorhousing

to drum,ensurethat thevacuuminletandtheblower

outletlineup vertically.

7. Never spray water overthe upper sectionofthe vacuum
cleaner.

3.