Hoover HS-WP7 User Manual

HS-WP7

User manual.

IMPORTANT: Read carefully before assembly and use.

This product is intended for household use only. If used commercially the warrany is void.

STEAM MOP 3-IN-1

Wipeout 7_UG for Taiwan_090716.indd 1 9/7/2016 3:45:22 PM

Welcome to

Hoover

ownership.

Wipeout 7_UG for Taiwan_090716.indd 2 9/7/2016 3:45:22 PM

Your Guide:

Safety information

Getting star ted with your steam mop

Assembly

Attach the wall bracket

How to use

Before you begin cleaning

Using your machine

Using the ﬂoor steamer

Using the ﬂoor steamer with power scrub brush

Using your machine to refresh carpets

Using the steam reach wand

Using the steam reach handheld

Attaching small accessories tools

Using accessories tools

Maintenance

Storage

Trouble shooting

Wipeout 7_UG for Taiwan_090716.indd 3 9/7/2016 3:45:22 PM

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

When using an electrical steam cleaner, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF USED COMMERCIALLY WARRANTY IS VOID.

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR INJURY:

• Fully assemble before operating.

• Operate steam cleaner only at voltage speciﬁed on data label on back of steam cleaner.

• Do not leave steam cleaner when plugged in. Unplug from outlet when not in use and before cleaning or servicing.

• Do not use outdoors or store outdoors.

• Do not use for space heating purposes.

• Do not immerse in water.

• Do not allow to be used as a toy. Not intended for use by children age 12 and under. Close supervision is necessary when used near children. To avoid injury, burn, or damage, keep children away from product, and do not allow children to touch steam cleaner while in use or before completely cool, or to place ﬁngers or other objects into any openings.

• Do not use any extension cord with this product.

• Do not handle the plug, or the Steam Mop with wet hands. Do not operate the Steam Mop without footwear.

• Do not place hands or feet under the Steam Mop while it is in operation as the steam cleaner gets very hot and may create a burn hazard.

• Use only on ﬂat, horizontal surfaces. Do not use the Steam Mop on walls, counter tops or windows.

• To protect against a risk of electric shock, do not immerse the Steam Mop into water or any other liquids.

• Use only as described in this manual. Use only manufacturer’s recommended attachments and products.

• Do not use with damaged cord or plug. If appliance is not work ing as it should, has been dropped, damaged, left outdoors, or dropped into water, please contact Hoover® authorized distributor for instructions before continuing use.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run steam cleaner over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not put any object into openings. Do not use with any opening blocked.

• Keep hair, loose clothing, ﬁngers, and all parts of body away from openings.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs. When not in use do not place steam cleaner on stairs or furniture, as it may result in injury or damage.

• To avoid burn or injury, do not apply steam directly to any person or animal.

Wipeout 7_UG for Taiwan_090716.indd 4 9/7/2016 3:45:22 PM

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICAN TO INSTALL THE PROPER OUTLET. DO NOT CHANGE THE PLUG IN ANY WAY.

• Only use water to reﬁll the water tank. Do not use any type of chemicals or additives in the water tank.

• Do not add descaling, aromatic, alcoholic products, cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this steam cleaner as this may damage the steam cleaner or make it unsafe for use. While this Steam Mop is designed for tap water, to increase effectiveness of the steam and to avoid build up of minerals, you may use distilled water to ﬁll Steam Mop.

• Do not use Steam Mop in an enclosed space ﬁlled with vapor given off by oil-based paint, paint thinners, some moth prooﬁng substances, ﬂammable dust, or other explosive or toxic vapors.

• When in use, never turn the steam cleaner over or use while on its side.

• Allow Steam Mop sufﬁcient time to cool prior to removing the microﬁber pad.

• Before cleaning the Steam Mop, unplug the power cord from the electrical outlet and clean with a dry or damp cloth. Do not pour water or use alcohol, benzene or paint thinner on the steam cleaner.

• Do not use in areas where ﬂammable or combustible liquids, such as gasoline may be present.

• Do not use without microﬁber pad properly attached to mophead.

• Do not clean over ﬂoor electrical outlets.

• Do not use the Steam Mop on leather, wax polished furniture or ﬂoors, synthetic fabrics, velvet or other delicate, steam sensitive materials.

• Recommend to use Hoover® 4X Steam Multi-Floor Cleaning

Solution.

• Do not operate Steam Mop without water in water tank.

• Unplug Steam mop from outlet before ﬁlling, rinsing or cleaning. Do not ﬁll water reservoir with more than recommended amount of water. Do not ﬁll solution reservoir with more than recommended amount of solution and water.

WARNING: This product contains chemicals known to

the State of California to cause cancer, birth defects or reproductive harm. WASH HANDS AFTER HANDLING.

CAUTION: TO REDUCE THE RISK OF DAMAGE:

• Check and follow ﬂooring manufacturers warranty and recommendations regarding the use of steam mops PRIOR to using this product on your ﬂoors and carpets.

• Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.

• Never use Steam Mop without microﬁber pad attached.

• Never leave Steam Mop in one spot or on any surface for any period of time when pump is turned on and steam is activated.

Wipeout 7_UG for Taiwan_090716.indd 5 9/7/2016 3:45:22 PM

Getting started with your steam mop:

CARTON CONTENTS A. Hoover 4X multiﬂoor Cleaning Solution B. 2 Microﬁber Pads C. Carpet Glider D. Tool Storage Bag E. Concentration Tool F. Large Brush G. Small Brush H. Metal Brush I. Grout Brush J. Scraper Nozzle K. Detail Nozzle L. Upholstery/Window/Shower Tool M. Upholstery Cloth

N. Wall Bracket

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing materials.

A B C D

E F G H

I J K L

Wipeout 7_UG for Taiwan_090716.indd 6 9/7/2016 3:45:23 PM

Assembly:

2 3

Grip the steam reach wand. Push the steam reach wand down into the ﬂoorhead until it clicks into place.

Grip the steam reach wand. Push the handheld down onto the steam reach wand until it clicks into place.

The steamer is not free standing and must always be stood either in the wall bracket or safely and securely against a wall or ﬁxed structure when not in use.

Assembling the steamer

Wipeout 7_UG for Taiwan_090716.indd 7 9/7/2016 3:45:23 PM

Attach the wall bracket:

Attaching the wall bracket using an adhesive strip

Fully assemble the unit and position it against the wall where it will be stored.

Remove the adhesive cover.

Attach the wall bracket to the handle.

Firmly press the handheld and wall bracket clip to ﬁx the wall wall bracket to the wall in the correct place.

Stand the unit close and upright against the wall.

Wipeout 7_UG for Taiwan_090716.indd 8 9/7/2016 3:45:24 PM

Attach the wall bracket:

Attaching the wall bracket with screws

Fully assemble the unit and position it against the wall where it will be stored.

Carefully remove the unit from the wall bracket and use the other screw to secure the wall bracket to the wall.

Attach the wall bracket to the handle.

Using one of the supplied screws,screw the wall bracket to the wallusing the top screw hole.

Wipeout 7_UG for Taiwan_090716.indd 9 9/7/2016 3:45:24 PM

How to use:

1. Control panel

2. Twin tank release button

3. Water tank

4. Solution tank

5. Handheld release buttons

6. Steam reach wand

7. Power scrub brush

8. Floorhead

9. Steam burst nozzle

10. Handle

11. Power ON/OFF switch

12. Handheld

13. Quick release cord hooks – Lower cord hook does not rotate)

14. Steam reach wand release pedal

15. Steam burst button

14 15

Front Back

Wipeout 7_UG for Taiwan_090716.indd 10 9/7/2016 3:45:25 PM

Filling the twin tank

Press the twin tankrelease button down, grip the twin tank and pull to remove.

Pull the tab on the water tank cap to open.

Fill the water tank with water. Replace the cap and push ﬁrmly to close.

Grip the twin tank and pull the tab on the solution tank cap to open.

Before you begin cleaning:

WARNING

This steamer is not free standing, when ﬁlling or carrying out any maintenance always stand securely against a wall/ﬁxed

structure or lie the steamer ﬂat on the ﬂoor in a suitable location

so it does not become a trip hazard or can be stepped on.

see next page

WARNING

To avoid risk of personal injury - turn off, unplug and allow steam cleaner to cool before servicing, ﬁling water tank or solution tank. Do not use hot

or boiling water to ﬁll water tank.

• IMPORTANT •

Do not add solution to the water tank.

Wipeout 7_UG for Taiwan_090716.indd 11 9/7/2016 3:45:26 PM

Before you begin cleaning:

Filling the twin tanks

• IMPORTANT •

Always test on an inconspicuous area of ﬂooring ﬁrst before using

solution. Don’t over ﬁll the clean twin tanksor exceed the maximum

amount required. Don’t use the steamer without water in the

water tank. Always top up with water in good time.

Before replacing the twin tank make sure the hard water ﬁlter is in place.

Line up the lip on the base of twin tank with the main body. Push in a hinge like manner to click into place.

Important : If the twin tank is not ﬁtted correctly there will be a reduction in the amount of steam/ solution produced.

Fill the solution tank up to the ﬁll line withwater and top up with solution replace the cap and push ﬁrmly to close.

• IMPORTANT •

Important: Do not mix Hoover Steam Cleaning

Solution with any other cleaning solution.

Wipeout 7_UG for Taiwan_090716.indd 12 9/7/2016 3:45:26 PM

WARNING

Never leave the steamer in one spot on any surface

for an extended period of time with

a damp or wet Microﬁber pad attached as this

may damage the ﬂoor surface.

When cleaning hard ﬂoors, your Steam Mop should

only be used on tiles, linoleum, sealed hardwood

ﬂooring, engineered hardwood, laminate,

vinyl and sealed stone ﬂoors.

If used on waxed ﬂooring, you may

experience loss of glossiness.

To reduce the risk of personal injury, unplug the

steam cleaner when assembling the accessories.

Do not clean over ﬂoor electrical outlets.

Do not use steam cleaner or press the Steam

Trigger without water in the water tank.

IMPORTANT

Never use the Steam Mop without the Microﬁber

pad properly attached to the Mop Head.

• The steamer and accessories get very hot during use, always allow them to cool down before handling.

• Always unplug and switch off the steamer when assembling.

• Always switch off the steamer before emptying the water tank or changing the cleaning pads/accessories.

• IMPORTANT: Please refer to ﬂoor manufacturer’s care recommendations before use and test the steamer on a discrete area of ﬂooring to begin with.

• When using the steamer, basic safety precautions should always be observed.

• Don’t aim the steamer at people, animals, plants or electrical components such as interior of ovens or wires. Never touch the steam spray or ﬂoor head from a short distance. (There is a risk of scalding)

• The steamer is equipped with a thermostat and a thermal cut out. If for any reason the steamer overheats it will switch off. If this happens turn off and unplug the steamer, allow to cool for a least 2 to 4 hours and re-start.

Using your machine:

Wipeout 7_UG for Taiwan_090716.indd 13 9/7/2016 3:45:27 PM

Place the microﬁber pad on the ﬂoor white side facing up. Place the ﬂoor head onto microﬁber pad making sure the microﬁber padcovers the entire ﬂoorhead.

Plug the steamer into main power supply and slide t he On/Off switch to “On”.

The orange light will illuminate to indicate power on.

The green light will illuminate to indicate the steamer is ready to use. The steamer will automatically set to Max steam (no solution).

Using your machine:

WARNING

Never use the steam ﬂoor steamer without a microﬁber cleaning

pad attached to the ﬂoorhead.Never leave the ﬂoor steamer in

one spot for an extended period of time or with a damp or

wet microﬁber pad attached as this may damage the ﬂoor surface.

Press the button in the centre of the control panel to select steam and solution setting. The light will illuminate at the desired setting: Max steam Low steam Max steam + solution Low steam + solution

Using the ﬂoor steamer

When the steamer is switched on the control panel will automatically set to max steam (no solution).

see next page

Wipeout 7_UG for Taiwan_090716.indd 14 9/7/2016 3:45:27 PM

Using your machine:

Pull handle down to recline.

To produce steam squeeze the trigger in short bursts. Don’t hold the trigger continuously to prevent over wetting ﬂoors.

Move the steamer slowly forwards and backwards across the ﬂoor paying particular attention to high trafﬁc areas. Squeeze/release trigger to release steam as required.

After cleaning, switch off and unplug the steamer. Allow the steamer to cool down. Hold the corner of the microﬁbre pad down with your foot and lift steamer to peel away.

For more concentrated steam use the Steam StreamTM technology. For best results use max steam + solution setting. Press the steam boost button on the ﬂoorhead to activate. Squeeze the trigger to release steam. Press the steam burst button to switch off.

Using the ﬂoor steamer

WARNING

To avoid risk of personal injury - turn off, unplug and allow steam cleaner to cool before

servicing, ﬁling water tank or solution tank. Do not use hot or boiling water to ﬁll water tank.

Wipeout 7_UG for Taiwan_090716.indd 15 9/7/2016 3:45:28 PM

Using the ﬂoor steamer with the power scrub brush

Place foot on outer ﬂoorhead and lift steamer to release the power scrub brush.

To produce steam squeeze the trigger in short bursts. Don’t hold the trigger continuously to prevent over wetting ﬂoors.

Move the steamer forwards and backwards across the ﬂoor, getting into corners and awkward places.

Re-ﬁt the scrub head by lining up with ﬂoorhead and pushing ﬁrmly into place.

For more concentrated steam use the Steam StreamTM technology. For best results use Max steam + solution setting. Press the steam burst button on the ﬂoorhead to activate. Squeeze the trigger to release steam. Press the steam boost button to switch off.

Using your machine:

For best cleaning results on stubborn stains in awkward places use the nano head on the max steam solution setting.

WARNING

To avoid risk of personal injury - turn off, unplug and allow steam

cleaner to cool before servicing, ﬁling water tank or solution tank. Do

not use hot or boiling water to ﬁll water tank.

Wipeout 7_UG for Taiwan_090716.indd 16 9/7/2016 3:45:29 PM

Using your machine:

Place the microﬁbre pad on the ﬂoor white side facing up. Place steamer onto pad making sure the entire pad covers the ﬂoorhead.

With microﬁbre pad attached, slide the ﬂoorhead into the carpet glider, then push the back of the ﬂoorhead downwards into the clip to secure. The carpet glider should only be used when refreshing carpets.

Plug the steamer into mains and slide the On/Off switch to “On”. The green light will illuminate when it is ready to use. The steamer will automatically set to Max steam (no solution).

Pull handle backwards to recline.

To refresh your carpets press the button on the control panel to select Steam only LOW. Do not use solution when refreshing carpets.

Refreshing carpets

see next page

• IMPORTANT •

Always test on an inconspicuous area of ﬂooring ﬁrst before using solution.

Don’t over ﬁll the clean twin tanks or exceed the maximum amount required.

Don’t use the steamer without water in the

water tank. Always top up with water in good time.

Wipeout 7_UG for Taiwan_090716.indd 17 9/7/2016 3:45:30 PM

Using your machine:

Move the steamer slowly backwards and forwards across the carpet.

When releasing the carpet glider, ensure he steam trigger is fully released ﬁrst. To release the carpet glider, place your foot on the clip and press down. Lift steamer out of the glider to remove.

After refreshing carpets, switch off and unplug the steamer. Allow the steamer to cool down. Hold the corner of the microﬁbre pad down with your foot and lift steamer to peel away.

To produce steam squeeze the trigger in short bursts. To prevent over wetting carpets avoid holding the trigger continuously.

Refreshing carpets

WARNING

Always switch off the steamer and allow steamer to cool before attaching/detaching the steam wand, ﬂoorhead, accessories and twin tank.Always stand steamer securely against a wall/ﬁxed

structure or lie the steamer ﬂat on the ﬂoor in a suitable location so it does

not become a trip hazard or can be stepped on.

Wipeout 7_UG for Taiwan_090716.indd 18 9/7/2016 3:45:30 PM

Using your machine:

Press the steam wand release pedal and pull the steam wand and handheld out of the ﬂoorhead.

Use the arrows to align the concentration nozzle to the end of the steam wand. Push the concentration tool onto the steam wand and twist clockwise to lock into position.

Plug the steamer into mains and slide the On/Off switch to On. The green light will illuminate when it is ready to use. The steamer will automatically set to Max steam (no solution).

To produce steam squeeze the trigger in short bursts. Don’t hold the trigger continuously to prevent soaking.

Press the centre pad on the control panel to select preferred setting steam/solution.

Using the steam reach wand

2. ROTATE

1. PUSH

WARNING

Always switch off the steamer and allow steamer to cool before attaching/detaching the steam wand, ﬂoorhead, accessories and twin tank.Always stand steamer securely against a wall/ﬁxed

structure or lie the steamer ﬂat on the ﬂoor in a suitable location so it does

not become a trip hazard or can be stepped on.

When using the steam reach wand do not aim towards electrical components such as light

ﬁttings, sockets and wiring.

see next page

Wipeout 7_UG for Taiwan_090716.indd 19 9/7/2016 3:45:31 PM

Using your machine:

The Steam Reach wand can be used at different heights for hard to reach places.

To improve your comfort, use the additional handgrip on the handheld to support the unit and help you clean difﬁcult to reach areas.

Using the steam reach wand

To improve your comfort, use the additional handgrip on the handheld to support the unit and help you clean difﬁcult to reach areas.

Wipeout 7_UG for Taiwan_090716.indd 20 9/7/2016 3:45:32 PM

+ 46 hidden pages

Hoover HS-WP7 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual