HOOVER HFF195WK, HFF195XK, HFF195BK User guide

HFF195WK
HFF195XK
HFF195BK

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instruction
manual in order to maximize its performance. Store all documentation
for subsequent use or for other owners. This product is intended solely for
household use or similar applications such as:

- the kitchen area for personnel in shops, offices and other working

environments

- on farms, by clientele of hotels, motels and other environments of a residential

type

- at bed and breakfasts (B & B)

- for catering services and similar applications not for retail sale.

This appliance must be used only for purposes of storage of food, any other
use is considered dangerous and the manufacturer will not be responsible for
any omissions. Also, it is recommended that you take note of the warranty
conditions.

SAFETY INFORMATION

The refrigerator contains a

refrigerant gas (R600a: isobutane)

and insulating gas (cyclopentane),

with high compatibility with the

environment, that are, however, infl

ammable.

We recommend that you follow the

following regulations so as to avoid

situations dangerous to you:

Before performing any operation,

unplug the power cord from the

power socket.

 The refrigeration system positioned

behind and inside the Wine Coolers

contains refrigerant. Therefore,

avoid damaging the tubes.

 If in the refrigeration system a leak

is noted, do not touch the wall outlet

and do not use open flames. Open

the window and let air into the room.

Then call a service centre to ask for

repair.

 Do not scrape with a knife or sharp

object to remove frost or ice that

occurs. With these, the refrigerant

circuit can be damaged, the spill

from which can cause a fire or

damage your eyes.

 Do not install the appliance in

humid, oily or dusty places, nor

expose it to direct sunlight and to

water.

 Do not install the appliance near

heaters or inflammable materials.

 Do not use extension cords or

adapters.

 Do not excessively pull or fold the

power cord or touch the plug with wet

hands.

 Do not damage the plug and/or the

power cord; this could cause

electrical shocks or fires.

 It is recommended to keep the plug

clean, any excessive dust residues on

the plug can be the cause fire.

 Do not use mechanical devices or

other equipment to hasten the

defrosting process.

 Absolutely avoid the use of open

flame or electrical equipment, such

as heaters, steam cleaners, candles,

oil lamps and the like in order to

speed up the defrosting phase.

 Do not use or store inflammable

sprays, such as spray paint, near the

Wine Coolers. It could cause an

explosion or fi re.

 Do not use electrical appliances

inside the food storage

compartments, unless they are of

the type recommended by the

manufacturer.

 Do not place or store inflammable

and highly volatile materials such as

ether, petrol, LPG, propane gas,

aerosol spray cans, adhesives, pure

alcohol, etc. These materials may

cause an explosion.

 Do not store medicine or research

materials in the Wine Coolers. When

the material that requires a strict

control of storage temperatures is to

be stored, it is possible that it will

deteriorate or an uncontrolled

reaction may occur that can cause

risks.

 Maintain the ventilation openings in

the appliance enclosure or in the

built-in structure, free of

obstruction.

 Do not place objects and/or

containers filled with water on the

top of the appliance.

 Do not perform repairs on this Wine

Coolers. All interventions must be

performed solely by qualified

personnel.

 This appliance can be used by

children aged from 8 years and

above and by persons with reduced

physical, sensory or mental

capabilities or with a lack of

experience and knowledge; provided

that they have been given adequate

supervision or instruction concerning

how to use the appliance in a safe

way and understand the hazards

involved.

 Children should not play with the

appliance. Cleaning and user

maintenance should not be made by

children without supervision

SCRAPPING OLD APPLIANCES

This appliance is marked according to the European directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for
the environment) and basic components (which can be re-used). It is important to have
WEEE subjected to specific treatments, in order to remove and dispose properly all
pollutants, and recover and recycle all materials.

Individuals can play an important role in ensuring that WEEE does not become an environmental

issue; it is essential to follow some basic rules:

- WEEE should not be treated as household waste;

- WEEE should be handed over to the relevant collection points managed by the
municipality or by registered companies. In many countries, for large WEEE, home
collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the
retailer who has to collect it free of charge on a one-to-one basis, as long as the
equipment is of equivalent type and has the same functions as the supplied equipment.

Conformity

By placing the mark on this product, we are confirming compliance to all
relevant European safety, health and environmental requirements which are
applicable in legislation for this product.

Energy Saving

For better energy saving we suggest :

Installing tge appliance away from heat sources and not exposed to direct
sunlight and in a well ventilated roo.

Avoid putting hot food into the refrigerator to avoid increasing the internal
temperature and therefore causing continuos functionaliting of the
compressor.

Do not excessively stuff foods so as to ensure proper air circulation.

Defrost the appliance in case there is ice to facilitate the transfer of cold.

In case of absence of electrical energy, it is advisable to keep the refrigerator
door closed.

Open or keep the doors of the appliance open as little as possible

Avoid adjusting the setting to temperatures too cold.

Remeve dust present on the rear of the appliance

This appliance is intended to be used in
household and similar applications such as

– staff kitchen areas in shops, offices and
other working environments;

– farm houses and by clients in hotels, motels
and other residential type environments;

– bed and breakfast type environments;
– catering and similar non-retail applications

This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given supervision

or instruction concerning use of the appliance

in a safe way and understand the hazards

involved. Children shall not play with the

appliance. Cleaning and user maintenance

shall not be made by children without

supervision.

WARNING

Caution:risk of fire

If the refrigerant circuit should be damaged:

$YRLGRSHQLQJIODPHVDQGVRXUFHVRILJQLWLRQ

7KRURXJKO\YHQWLODWHWKHURRPLQZKLFKWKH
DSSOLDQFHLVVLWXDWHG

:$51,1*².HHSYHQWLODWLRQRSHQLQJVLQ
WKHDSSOLDQFHHQFORVXUHRULQWKHEXLOWLQ
VWUXFWXUHFOHDURIREVWUXFWLRQ

:$51,1*²'RQRWXVHPHFKDQLFDOGHYLFHV

or other means to accelerate the defrosting

SURFHVVRWKHUWKDQWKRVHUHFRPPHQGHGE\
WKHPDQXIDFWXUHU

:$51,1*²'RQRWGDPDJHWKHUHIULJHUDQW
FLUFXLW

:$51,1*²'RQRWXVHHOHFWULFDODSSOLDQFHV
LQVLGHWKHIRRGVWRUDJHFRPSDUWPHQWVRIWKH
DSSOLDQFHXQOHVVWKH\DUHRIWKHW\SH
UHFRPPHQGHGE\WKHPDQXIDFWXUHU

:$51,1*²7KHUHIULJHUDQWDQGLQVXODWLRQ
EORZLQJJDVDUHIODPPDEOH:KHQGLVSRVLQJ

of the appliance, do so only at an authorized
waste disposal centre. Do not expose to flame.

RECOMMENDATIONS

1)The appliance has to be unplugged after use
and before carrying out user maintenance on
the appliance.

2)This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.

3)Children should be supervised to ensure
that they do not play with the appliance.

4)If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.

5)Do not store explosive substa nces such as
aerosol cans with a flammable propellant in
this appliance.

WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure,
clear of obstruction.

WARNING: Do not use mechanical devices or
other means to accelerate the defrosting
process, other than those recommended by the
manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances
inside the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.

5

5

6

7

7

7

7

8

8

Meaning of safety warning symbols

The symbols indicate prohibited matters, and those
behaviors are forbidden. Non-compliance with the
instructions may result in product damages or endanger

Prohibitio n symbols

Warning symbols

Note symbols

CAUTION :

the personal safety of users.

The symbols indicate matters that must be followed, and
those behaviors must be strictly executed in line with the
operation requirements. Non-compliance with the
instructions may result in product damages or endanger
the personal safety of users.

The symbols indicate matters to pay attention to, and
these behaviors shall be specially noted. Due
precautions are needed or minor or moderate injuries
or damages of the product will be caused.

The appliance is not intended for use by young children or infirm persons without
supervision.

Young children should be supervised to ensure that they do not play with the
appliance.

GENERAL：

This type of refrigerator-freezer is widely used in places such as hotels ,offices,
student dormitories and houses. It is mostly suitable for refrigerating and preserving
foods such as fruits and b
Low electric consumption and easy use.

everage. It enjoys the advantages of small size, Lightweight,

This manual contains lots of important safety information
which shall be observed by the users.

2

WARNING

Cautio n:risk of fire

RECOMMENDATIONS

1)The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.

2)This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

3)Children should be supervised to ensure that they do not play with the appliance.

4)If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

5)Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.

Correct Disposal of this product
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the environment)
and basic components (which can be re-used). It is important to have WEEE subjected to specific
treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it
is essential to follow some basic rules.
WEEE should not be treated as household waste.
WEEE should be handed over to the relevant collection points managed by the municipality or by
registered companies.
In many countries, for large WEEE, home collection could be present.
When you buy a new appliance, the old one may be returned to the retailer who has to collect it free of
charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions
as the supplied equipment.

REQUE STING ASSI STAN CE OR SERV ICE
If the pr oblem is no t due to one of the ite ms listed i n Troubleshoot ing, Cont act the dea ler or a uthoriz ed
Servi ce Compan y.

By pl acing t he mark on this p roduct, we are con firming compliance to all releva nt European
safet y, heal th and envi ronment al requ irements wh ich are applic able in leg islatio n for t his product .



TIPS FOR ENERGY SAVING

Tips for energy saving

Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, close
it as soon as possible.

Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the
appliance).

In normal temperature conditions, please arrange the thermostat at the middle setting.

Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature.

Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is 3-5 mm thick.

The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts
down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere
with cold air circulation, making the appliance less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.



Electricity related warnings

Do not pull the power cord when pulling the power plug of the
refrigerator. Please firmly grasp the plug and pull out it from
the socket directly.
Do not damage the power cord under any condition so as to
ensure safety use, do not use when the power cord is damaged
or the plug is worn.
Worn or damaged power cord shall be replaced in
manufacture-authorized maintenance stations.

Please use a dedicated three-hole power socket which is 10A
or more and the power socket shall not be shared with other

10A

electrical appliances.
The power cord should be firmly contacted with the socket or else
fires might be caused. Please ensure that the grounding electrode
of the power socket is equipped with a reliable grounding line.
This appliance should be used only on a socket with a minimum rating
of 13 Amp. Our ready-fitted plug is already equipped with a 13 amp
fuse which is BS 1362 ASTA approved. Any replacement should be
exactly the same.

The refrigerator adopts 220-240V/50Hz AC power, voltage fluctuations
over the range of 187 ~ 264V will cause malfunction or even damage,
so a 750 W automatic voltage regulator must be installed in concert
with the AC power.
Please turn off the valve of the leaking gas and then open the doors
and windows in case of leakage of gas and other flammable gases.
Do not unplug the refrigerator and other electrical appliances
considering that spark may cause a fire.

To ensure safety, it is not recommended that to place regulators,
rice cookers, microwave ovens and other appliances at the top of the
refrigerator, those recommended by the manufacture are not included.
Do not use electrical appliances in the food pantry.

Related warnings for use

Authorized demolition or renovation of the refrigerator is not prohibited.
It is forbidden to damage the refrigerant lines and the repair and
maintenance of the refrigerator must be carried out by professionals.
Damaged power cord must be replaced by the manufacturer, its
maintenance department or related professionals in order to avoid
danger.

The surrounding of the appliances around or the embedded structure
shall not be obstructed while good ventilation shall be maintained.
The gaps between refrigerator doors and between doors and refrigerator
body are small, be noted not to put your hand in these areas to prevent
squeezing the finger. Please be gentle when switching off the refrigerator
door to avoid falling articles.
Do not pick foods or containers in the freezing chamber when the
refrigerator is running, especially metal containers in order to avoid frostbite.



Do not allow children to enter or climb the refrigerator to prevent that
children are sealed in the refrigerator or children are injured by the
falling refrigerator.

Do not spray or wash the refrigerator; do not put the refrigerator in
moist places easy to be splashed with water so as not to affect the
electrical insulation properties of the refrigerator.

Do not place heavy objects on the top of the refrigerator considering
that objectives may fall when switching the door, and accidental
injuries might be caused.

Please pull of the plug in case of power failure or cleaning. Do not
connect the freezer to power supply within five minutes to prevent
damages to the compressor due to successive starts.

Warnings related to placing items

Do not put flammable, explosive, volatile and highly corrosive items
in the refrigerator to prevent damages to the product or fire accidents.

Do not place flammable items near the refrigerator to avoid fires.

This product is household refrigerators and shall be only suitable for
the storage of foods. According to national standards, household
refrigerators shall not be used for other purposes, such as storage
of blood, drugs or biological products.

Do not place items such as bottled or sealed container of fluid such
as bottled beers and beverages in the freezer to prevent bursts and
other losses.

Warnings related to disposal

The refrigerator's R600a refrigerant and cyclopentane foam materials are combustible materials
and discarded refrigerators should be isolated from fire sources and can not be burned.
Please transfer the freezer to qualified professional recycling companies for processing to avoid
damages to the environment or other hazards.

Please remove the door of the refrigerator and shelves which shall be properly
placed to avoid accidents of children entering and playing in the refrigerator.



Names of components

Thermostat button
Light

Glass shelf

Vegetable basket

Flip

F drawer

Adjustable wheel

Upper tray

Lower tray

Refrigerating chamber

The Refrigerating chamber is suitable for storage of a variety of fruits, vegetables, beverages and
other food consumped in the short term.
Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
Foods are recommended to be sealed up before putting into the refrigerator.
The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.

Freezing chamber



The low temperature freezing chamber may keep food fresh for a long time and it is mainly used to
store frozen foods and making ice.
The freezing chamber is suitable for storage of meat, fish, shrimp, dumplings, rice balls and other
foods not to be consumed in short term.
Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted food
shall be consumed within the shelf time.

The features and accessories of the refrigerator you bought may be not
entirely consistent with the legend, please refer to the packing list.



Thermostat

The temperature selector knob is located on the right hand side wall of the refrigerator interior
SettingĀOffā˖UnitOff
SettingĀMinā˖Less Cool Temperature
SettingĀMedā˖Normal Operation(adequate for most situations)
SettingĀMaxā˖Coolest Temperature

When environment temperatures is high (e.g. on hot summer days), if the thermostat setting is Coolest
(positioning MAX), the compressor runs continuously.
Reason: when the ambient temperature is high, the compressor runs continuously to maintain the low
temperature in the appliance.

For the first time you install your refrigerator, set the thermostat knob at ĀMedā
Give your refrigerator time to cool down completely before adding food. It is the best to wait
24 hours before adding food.The thermostat knob controls the temperature. When the

thermostat control knob is set to OFF, the refrigerator will not be running.
The freezing and storage test should be done, according to regulation, removing all drawers except the
bottom one.

MAX

OFF

MED

MIN

Illu minatin g la mp and repla cement

If the refrigerator lamps damaged please contact our customer service

Placement

Before using the
refrigerator, remove all
packaging materials
including bottom
cushions and foam pads
and tapes inside the
refrigerator, tear off the
protective film on the door
and the refrigerator body.

Keep away from heat and
avoid direct sunlight. Do not
place the freezer in moist or
watery places to prevent rust
or reduction of insulating
effect.







Start

The refrigerator shall stay
for half an hour before
connecting 220-240V/
50Hz power when it is
firstly started.
The re frige rat or shal l run
2 to 3 hours before loading
fresh or frozen foods; the
refrigerator shall run for
more than 4 hours in
summer in advance
considering that the
ambient temperature is
high.

549mm

580mm

951mm

915mm

The refrigerator is placed in a
well-ventilated indoor place;
the ground shall be flat, and
sturdy (rotate left or right to
adjust the wheel for leveling if
unstable).

The top space of the refrigerator
shall be greater than 30cm, and
the distances from both sides and
backside shall be more than 10
cm to facilitate the opening and
closing and heat dissipation.
Wipe the refrigerator inside and
outside with warm moist rag (add
a small amount of detergent in the
warm water and wipe clean finally
with clean water).

Please leave enough space to
ensure feasible opening and
drawer removal.

Dimensions shown are for
reference only.



Cleaning

Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling
effect and energy saving. The interior of the refrigerator should be cleaned regularly to avoid odor.
Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for
cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for
natural drying before the power is turned on.

Do not use hard brushes, clean steel balls, wire brushes,
abrasives, such as toothpastes, organic solvents (such as
alcohol, acetone, banana oil, etc.), boiling water, acid or
alkaline items clean refrigerator considering that this may
damage the fridge surface and interior.
Do not rinse with water so as not to affect the electrical insulation
properties. Please use a dry cloth when cleaning lighting lamps,
temperature control knob and electrical components.

Please unplug the refrigerator for defrost and cleaning.

Stop using

Foods can be preserved for a couple of hours even in summer in case of power failure; it is
recommended to reduce the frequency of opening door and do not put fresh foods into the freezer.

Please unplug the refrigerator left unused for a long time for cleaning. Keep the door open to avoid
the bad odor.

Before moving the refrigerator, please emove all items in the refrigerator and fasten the glass
partitions, fruit and vegetable boxes, freezer drawers with taps lest the door opens during
displacement; Do not turn upside, horizontally place or vibrate the refrigerator, the carrying angle can
not be greater than 45 ℃.

Continuous operation is recommended when the refrigerator is started. Please do not move
the refrigerator under normal circumstances so as not to affect the refrigerator's service life.



The following simple issues can be handled by the user. Please call the after-sale service
department if the issues are not settled.

Whether the freezer is plugged and connected to power;

Inoperation

Low voltage;
Failure power or tripping circuit

Odorous foods should closely wrapped;

Odor

Whether foods are rotten;
Whether the interior shall be cleaned.

Foods in the refrigerating

chamber are frozen

Long-term operation
of compressor

Illuminating light
does not shine

The refrigerator door
can not be properly
closed.

Loud noises

Whether the thermostat is over adjusted;
Whether foods containing water is put in inside the
glass partition.

It is normal that refrigerator operates for longer time in
summer when the ambient temperature is higher;
Do not put too much food in the freezer at one time;
Do not put foods until they are cooled;
Frequent opening of refrigerator door.
Thick frost layer (defrost

is needed)

Whether the refrigerator is connected to power,
whether the illuminating light is damaged.

The freezer door is stuck by food packages;
Too much food;



Tilt refrigerator.

Whether the food is leveled, whether the refrigerator is
balanced;
Whether the refrigerator parts are properly placed.

Warm tips:

◆The refrigerator enclosure may emit heat during operation specially in summer, this is caused by
the radiation of the condenser, and it is a normal phenomenon.

◆Condensation: condensation phenomenon will be detected on the exterior surface and door
seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the
condensation can be wiped away with a dry towel.

◆Airflow sound: Refrigerants circulating in the refrigerant lines will produce eruption of sound and
grunts which is normal does not affect the cooling effect.

◆Buzz: Buzz will be generated by running compressor specially when starting up or shutting down.

◆Clatter: The solenoid valve or electric switch valve will clatter which is a normal phenomenon

and does not affect the operation.

◆The refrigerating chamber will periodically frost and defrost (water drops will be generated on the
backside of the refrigerating chamber when defrosting) which are normal.



Door install guidelines about swapping left&right

Screw caps and screws

Catch (two)

1. Remove the two rear screw caps with a small flat blade
(terminal) screwdriver. Remove the two screws with a
cross-slot screwdriver. The lid should now lift and slide
off the product.

2. Remove the screws fixed the top-hinge with cross-slot
screwdriver.

Screw（three）

3. Replace the top-hinge and the top-door limit block and
the door bearing bush to the other side.

A.Remov e the nut with sleeve.Take off the wash er
then remove the axes to the other side and fixed.

B.Remov e the top door limit block

11

Door install guidelines about swapping left&right

C.Please taking out another door limit block, with
screw mounting to the door

4 Disassemble the screws fixed the bottom-hinge with

cross-slot screwdriver

The screws fixed the bottom-hinge

Note the refrigerator-freezer incline angle less 45e.

5 Replace the bottom door bearing bush and the limit
block

6 IReplace the bottom hinge to the other side then fix
it with screws.

7 replace the mid-hinge

8 Set the bottom door right position,fix the mid-hinge.

9 replace the top-hinge

12

Door install guidelines about swapping left&right

10、Set the top door right position,fix the top-hinge and the cover.

11、Install the four screw caps and two catches to
corresponding position.

gEnsure the Appliance is unplugged and empty.
gAdjust the two leveling feet to their highest position.
gWe recommend you have someone to assist you.

12、replace the leveler to the other side and adjust it to make
sure the cabinet level

Attachment：

1. Components that could be transferred from one side to the other directly after disassembling are listed
below:
top door top endcap coverslip (2pcs)
top cover buckle (1pc)
hinge shaft sleeve (1 or 2pcs)
screws of top hinge (3 pcs)
middle hinge assembly (1 pc)
screws of middle hinge (2 pcs)
insert nail (2 pcs)
screw cap (2 pcs)
door stopper (1 pc)
bottom hinge assembly (1 pc)
screws of lower hinge (3pcs)

2. The component that could be swapped over from one side to the other only after reconstruction is listed
below：
top hinge assembly

3. Components that could be swapped over from one side to the other in pairs are listed below:
adjustable foot with
adjustable foot with bolt (fixed at the bottom)

4. Components that could not be reused temporarily are listed below:
left block on top door
right block on top door
Ensure the
Adjust the two leveling feet to their highest position。
We recommend you have someone to assist you。
NOTE：
To take the door off it is necessary to tilt the Appliance backward。
You should rest the Appliance on something solid e.g.a chair just below the top panel。
Do not lay the Appliance completely flat as this may damage the coolant system。

Appliance is unplugged and empty。

internal thread

(used with the lower hinge)

13