Hoover F7227-900 Owner’s Manual

HOOVE

ENGLISH ,.P pp. 1-17 ESPANOL ,._ p_g. 18-27 FRAN(_AIS ,._ p. 28-37

Dee

The Easy to Use Deep Cleaner

p Cleaner

SteamVac TM Dual V TM Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution.

www.hoover.com

|mpo ant Safeguards!

When using an electrical appliance, always follow basic precautions, including

the following:

READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.

WARNING:

To reduce the risk of fire, electric shock, or injury:

. Use indoors only. . Use only on surfaces moistened by

the cleaning process. Do not immerse

product.

. Connect to a properly grounded

outlet only. See "Grounding Instructions".

. Do not clean over floor electrical

outlets.

. Do not use without tanks in place. . Do not fill with water above 140°F

(60°C).

. Do not use with damaged cord or

plug. if appliance is not working as it

should, has been dropped, damaged,

left outdoors, or dropped into water,

take it to a Hoover Factory Service

Center or Authorized Hoover Warranty Service Dealer.

. Close supervision is necessary when any appliance is used by or

near children. Do not allow deep cleaner to be used as a toy or to run unattended at any time.

. Do not point tools toward people or

pets.

Grounding

Instructions

A B

This appliance must be grounded. If it

should malfunction or breakdown, grounding provides a path of least resis-

tance for electrical current to reduce the

risk of electric shock. This appliance is equipped with a cord having an equip- ment-grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B)

that is properly installed and grounded

in accordance with all local codes and ordinances.

. Use extra care when cleaning on stairs. Do not place deep cleaner on

stairs. . Use deep cleaner only for its

intended use as described in the instructions.

. Use only attachments recommend-

ed by The Hoover Company; others

may cause hazards.

. The use of an extension cord is not

recommended, if an extension cord is

absolutely necessary, use at least a

16 gauge 3-wire cord which has a 3=

prong grounding type plug and a 3- pole receptacle that accepts the machine plug.

. Unplug deep cleaner when not in

use. Turn off all controls before unplugging.

. Unplug before connecting the pow= ered hand tool.

. Always disconnect cord from electri-

cal outlet before servicing the deep cleaner.

. Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord.

. Never handle plug or appliance with wet hands.

. Do not pull or carry by cord, use

cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated

surfaces.

. Use only commercially available

Hoover SteamVac TM cleaners intended

for machine application. Do not use any type of wax with deep cleaner.

. Keep detergents and other cleaners

out of children's reach.

. Do not use to pick up flammable or

combustible liquids such as gasoline or use in areas where they may be present.

. Do not pick up chlorine bleach,

drain cleaner, gasoline or any other

toxic material with this appliance. . Do not pick up anything that is

burning or smoking, such as ciga= rettes, matches, or hot ashes.

. Avoid picking up hard, sharp

objects with the deep cleaner. They may damage the machine.

. Keep hair, loose clothing, fingers, feet and all parts of body away from

openings and moving parts.

. Do not put any object into open=

ings. Do not use with any opening

blocked; keep free of dust, lint, hair,

and anything that may reduce air flow.

. To help prevent matting and resoil-

ing, avoid contact with carpets until

they are dry. Keep children and pets away from carpets until they are corn=

pletely dry.

. Store in a dry place. Do not expose

machine to freezing temperatures.

Save these instructions!

DANGER-

Improper connection of the equipment-

grounding conductor can result in the risk of electric shock. Check with a qual- ified electrician or service person if you

are in doubt as to whether the outlet is properly grounded. Do not modify the

plug provided with the appliance - if it

will not fit the outlet, have a proper outlet

installed by a qualified electrician. This

appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in

sketch (A).

A temporary adapter (D) may be used to connect this plug to a 2-pole receptacle (E) if a properly grounded outlet is not available. The temporary adapter should

be used only until a properly grounded outlet (B) can be installed by a qualified

electrician. The green colored rigid ear,

lug, or the like (F) extending from the adapter must be connected to a perma-

nent ground (G) such as a properly grounded outlet box cover. Whenever

the adapter is used, it must be held in

place by a metal screw. NOTE: In Canada, the use of a temporary adapter

is not permitted by the Canadian

Electrical Code.

Thank you for choosing a HOOVER product.

If you need _ assistance:

Visit our website at www.hoover.com Click on the "Service" button to find the service outlet nearest you OR

Call 1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

Fill in and Save

Please enter the COMPLETE model and serial numbers in the spaces provided

and save.

The model and serial numbers are located on the data label on the back of the

handle. Model No. Serial No.

Hint: Attach your sales receipt to this owner's manual.

Verification of date of purchase may be required for warranty service of your

Hoover product.

Contents

Important safeguards .......... 2

Parts needed for assembly ....... 3

Assembling deep cleaner ...... 4-6

Deep cleaner description ........ 7

General operation ............ 7-9

Filling the clean water tank... 8-9

Emptying the recovery tank .... 9

Brush speed selector ......... 8

Automatic shut-off ............ 8

How to use

Before you begin ........... 10

After cleaning ............ 10-11

Cleaning carpet ............. 11

Cleaning bare floors ......... 12

Using the tools .......... 12-15

Cleaning carpeted stairs ..... 14

Cleaning upholstery ....... 15

If you have a problem ......... 16

Lubrication .................. 16

Service ..................... 17

Storage ..................... 16

Warranty .................... 17

Parts needed for assembly

A. Deep cleaner

B. Upper handle C. Handle bolts and nuts (in bag with hose)

D. Hose/cord hook E. Hose

F. Hose/tool caddy

i ii

®@

www.hoover.com

Accessories - vary by model

Not all accessories are included with every model.

G. Carpet/Upholstery Detergent H. Bare Floor Cleaner

I. Pre-cleaner

J. Bare floor tool

K. SpinScrub TM hand tool L. Utility tool M. Stair/upholstery nozzle

Accessories not included with your model may be

purchased separately using the order form located at

the center of this manual.

The assembled cleaner will look like this drawing. Model with SpinScrub TM hand

tool is shown.

i,IM

Attach upper handle

Remove clean water tank (upper tank)

from deep cleaner.

i tl

NOTE: If the cord protector (A) on back

of handle should become dislodged

during unpacking, make sure it is repo-

sitioned properly before continuing with assembly of your deep cleaner.

With the arrow (B) on the cord protector

pointing down, press groove (C) in the

cord protector into slot in the lower

handle.

With cord hook (D) to back of deep cleaner,

push upper handle down onto lower handle.

Push bolts into holes on front of handle. If

bolts will not go through hole easily, han-

dle is not pushed completely down.

Place nuts in recessed areas on back

of the handle. Hold each nut in place

while tightening each bolt securely (from the front of the handle) with a Phillips

screw driver. Only two nuts are needed on this model.

The extra nut is not required but has

been provided for your convenience.

Attach hose/tool caddy

The hose/tool caddy is designed to be

used either on the cleaner for easy access to the tools and hose, or if the tools are not going to be used, it can be

removed and hung for storage.

If you do not want to attach the caddy to the cleaner at this time, proceed to Fig.

1-10 for proper hose placement on the caddy.

Replace clean water tank (upper tank) by positioning bottom first. Press tank

into place.

BUl

F .,,.,,.

Attach hose/cord

hook

Insert tabs on hook into slots on back of

cleaner. Snap hook onto cleaner. 4

Slide tabs (E) on caddy into slots (F) on back of cleaner.

IEl;l

Rotate top of caddy toward cleaner handle. Slide caddy down so notch (G)

on caddy rests in hook (H) on cleaner.

Press hose into opposite side of caddy. Loop hose at bottom of cleaner and

press into top of hook (K).

Identify the hose parts before storing

hose.

I. Nozzle connector end J. Solution tube

Loop hose over top of caddy again. Slide hose clip (L) toward end of hose. Snap tab (M) on hose connector into

hose clip.

Storing hose and

tools

Press hose, a few inches from nozzle connector end (I), into caddy. Bring

hose up and over top of caddy.

Repeat on other end of hose. Press solution tube (J) into opposite side

of clip.

Insert top of bare floor tool (available at additional cost if not included with your cleaner) through "loop" on caddy. Slide tool down into place.

Snap stair/upholstery nozzle onto caddy.

SpinScrub TM hand tool

(not included with all models) The SpinScrub TM hand tool is shipped in

a plastic bag for protection. To remove the bag before using the tool, open tool

door.

r_d:]

Pull tool down and outward. To reposition the tool, reverse this proce-

dure.

How to reattach tool cover

The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges of cover with holes on sides of tool storage area. Snap door into place.

+ 11 hidden pages