Hoover F6212-916, F6212-906, F6212-901 Owner’s Manual

Page 1
_
HOOVER
= ._
#"'ENGLISH -_ pp. 1-14
_ESPANOL ,._ pag. 16-24
TM
www.hoover.com ®
Page 2
When using an electrical appliance, always follow basic precautions.
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.
WARNING:
To reduce the risk of fire. electric
shock, or injury:
Use indoors only.
Use only on surfaces moistened by the cleaning process. Do not immerse product.
Connect to a p roperlygrounded Close supervision is necessary outlet only. See ' Grounding when any appliance is used by or
Instructions'. near children. Do not allow deep
Do not clean over floor electrical unattended at any time. outlets.
Do not use without tanks in place, or pets
Use extra care when cleaning on stairs. Do not place deep cleaner on
stairs.
Use deep cleaner only for its intended use as described in the
instructions.
Use only attachments recom- mended by The Hoover Company: Do not use to pick up flammable
others may cause hazards, or combustible liquids such as
The use of an extension cord is may be present. not recommended. If an extension
cord is absolutely necessary, use at least a 16 gauge 3-wire cord which has a 3-prong grounding type plug and a 3-pole receptacle tqaat accepts the machine plug.
Unplug deep cleaner when not in use. Turn off all controls before
unplugging.
Unplug deep cleaner before con-
necting the powered hand tool.
Always _disconnect cord from electri-
cal outlet before servicing the deep cleaner.
. Do not unplug by pulling on ings. Do not use with any opening
cord. To unplug, grasp the plug, not blocked; keep free of dust, Iint,
the cord. hair, and anything that may reduce
Never handle plug or appliance
with wet hands.
Do not pull or carry by cord, use
cord as a handle, close door on cord or pull cord around sharp edges or
corners. Do not run appll'ance over cord. Keep cord away from heated
surfaces.
Do not use with damaged cord or
plug. If appliance is not working as
it should, has been dropped, dam- aged, left outdoors, or dropped into
water, take it to a Hoover Ffictory
Service Center or Authorized Hoover Warranty Service Dealer.
cleaner to be used as a toy or to run
Do nol point tools toward people
Use only commercially available
Hoover SteamVac TM cleaners intended for machine application
Do not use any type of wax with
deep cleaner.
Keep detergents and other clean-
ers out of chirdren's reach.
gasoline or use in areas where they
Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic material with this appliance.
Do not pick up anything that is burning or smoking, such as ciga-
rettes, matches, or riot ashes.
Avoid picking up hard, sharp objects with the deep cleaner. They may damage the machine
Keep hair, loose clothing, fingers, feet and all parts of body away
from openings and moving parts.
Do not put any object into open-
air flow.
To help prevent matting and resoiling, avoid contact with carpets until they are dry. Keep children and pets away from carpets until they are completely dry.
Store in a dry place. Do not ex- pose machine to freezing tempera-
tures.
Grounding
Instructions
B
© ©
¢
This appliance must be grounded. If it
should inalfunction or breakdown, grounding provides a path of least resis
tance for electrical current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equip ment-grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B) that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER-
Iinproper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a quali fied electrician or service person if you
are in doubt as to whether the outlet is properly grounded. Do not modify the
plug provided with the appliance if it
will not t_t the outlet, have a proper out-
let installed by a qualified electrician. This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated
in sketch (A).
A temporary adapter (D) may be used to connect this plug to a 2-pole receptacle
(E) if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (B) can be installed by a qualified electrician. The green cok_red rigid ear, lug, or the like (F) extending fi'om the adapter must be connected to a perma nent ground (G) such as a properly grounded outlet box covm: Whenever the adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
Page 3
F To contact us:
www.hoover.com
1-800-944-9200 - automated service
dealer locator
1-330-499-9499 - our Consumer Response Center (8 AM to 5 PM
Monday - Friday)
/ Fill in and Save
For yourrecords,enterthemode]number and
serial numbers in the spaces provided. These numbers are located on the data label on the back
of the cleaner.
Model No, Serial No,
Save your sales receipt and attach it to this manual. Proof of date of purchase may be
Important safeguards ........ 2
Carton contents ............. 3
Cleaner description ..........4
Deep cleaner basics .......... 5
Filling the tank ............ 5
Emptying the recovery tank . 6
Attaching the hose ......... 7
Selecting & attaching tool... 7
Draining & storing hose .... 8
Cleaning carpet .......... 10-11
Cleaning upholste_ T ..... 11-12
Basic steps for cleaning ...... 13
Warranty .................. 14
k.. j
x<_, x>_x xxx
,,NNg_,ill.............
xx×xxxxxxxxx _,_k_T0_,_ 4_7_
A
LISTED
© 2004 The Hoover Company w_v.hoover.com Continued "_ 3
Page 4
14
9 21_
16
13
18
1. Hand grip
2. Solution trigger: press to release
cleaning solution
3. Clean Surge TM button
4. Upper handle
5. Upper handle release button
6. Solution tank cap/measuring cup
7. Solution tank release button
8. Solution tank
9. Brush setting selector
10. Nozzle
11. Recovery tank
12. Recovery tank release button
13. Powered hand tool
14. Recovery tank cap
15. Stair/upholstery nozzle
16. Cord hooks (tool caddy removed)
17. Hose door
18. Handle release pedal
19. ON/OFF pedal
20. Hose
21. Cord hooks (tool caddy stored on cleaner)
22. Hose connector
23. Tool caddy
Your HOOVER Deep Cleaner is
fully assembled and ready to begin cleaning!
Unfold handle
This deep cleaner is intended for household use.
Operate deep cleaner only at voltage specified on data plate on back of cleaner. Plug deep cleaner into a proper-
ly grounded outlet, j
How to fold handle
Raise upper handle (A) to upright position until it locks in place.
J
\
Press upper handle release
button (B) to fold handle.
Page 5
Fill the solution tank
Unplug deep cleaner from
electrical outlet.
/
Press button (A) and remove solution tank (Fig. 3)
/
Release latches (B) on tank cap and remove (Fig. 4)
/
Use cap (Fig. 5) to measure the proper amount of HOOVER detergent according
to the chart below:
Amount of
Surface detergent Type of detergent
Carpet two HOOVER Carpet/
caps Upholstery Detergent
Upholstery one HOOVER Carpet/
cap Upholstery Detergent
For heavy traffic areas: Pre-treat with HOOVER Spot and Stain Spray (available at additional cost if not
included with your model)
OR
Use 4 caps of Carpet/Upholstery detergent.
W
F_JUOrE._:
TW_C_OrCA_pE_
US_ONLYHOOV£R
CLEAN(NG D_TERGEN(
TOASS_REpEAK
PeRfORMAnCE
HOTTApWATER
RII T_kwilh
They are specifically formulated for use with your NOTE: For best results, use only Hoover detergents.
SteamVaC M Deep Cleaner.
/
Pour detergent into tank
/
Fill tank to fill line (C) (approx. 1 gallon) with hot tap water
(Fig.6)
/
Replace cap. Secure both latches (B) (Fig. 4)
/
Place bottom of tank onto cleaner. Pivot top of tank and snap in place (Fig. 7)
Caution: Detergents contain Anionic and Nonionic Surfactants. Avoid contact with the eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes.
In case of contact with skin, wash with water. If irritation persists, call a physician. For Medical Information (U.S.),
call 1-800-752-7869.
)
Continued -P 5
Page 6
D Empty the recovery tank
Unplug deep cleaner from electrical outlet.
¢
An automatic shut-off device prevents the cleaner from picking up more dirty water than it can hold in the recovery tank.
You will know the tank needs to be emptied --
The amount of dirty water has reached the full line
(A).
When the motor sound rises in pitch.
You do not see dirty solution coming up through the nozzle.
The float (B) inside the recovery tank has risen to the top of the tank (Fig. 8).
_/ Press button (C) and remove tank (Fig. 9).
_/ Release latches (D) on tank cap and remove cap (Fig.
10).
@
k.
,/ Empty tank.
¢' Replace cap (Fig. 11). Secure both latches (D) (Fig. 10).
For full suction, it is important that the recovery tank cap is properly secured before cleaning.
,/ Remove any debris that has collected on lint filter (E)
on cleaner body (Fig. 12 and inset).
,/ Place bottom of tank onto cleaner. Pivot top of tank
J
and snap in place (Fig. 12).
Page 7
Unplug deep cleaner from electrical outlet.
_/ Place handle in upright position.
,/ The hose and tool caddy can be removed from the
cleaner if you desire.
_/ Remove hose from tool caddy.
_/ Open hose door (A) on back of deep cleaner (Fig. 13).
,/ Align hose connector with hose and solution ports (C)
(Fig. 14).
,/ Push hose into port and lock in place.
_/ To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
_/ Close hose door (A) tightly (inset).
f Z
Select tool
SpinScrub TM hand tool
Rotating brushes
Use on carpet to clean spots, small areas or
stairs
)
Stair/Upholstery nozzle
Built-in brush
Use on upholstery
Unplug deep cleaner from electrical outlet. ,/ Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
_/ To remove tool: Push forward and up on latch (F) (Fig. 19).
Slide tool off hose.
E
Continued _ 7
Page 8
The handle must be in the upright position in order to 1
et cleaning solution through the hose. J
Drain the hose
When finished using the hose and tool, remove water
if'ore the hose. ¢" Turn deep cleaner on and hold end of hose up for
several seconds (A). Do not press trigger. (Fig. 20)
,t" Turn deep cleaner off and unplug it. V" Hold hose connector in sink and press trigger to
remove solution from hose (B) (Fig. 20).
Unplug deep cleaner from electrical outlet.
Hook hose connector (C) into caddy (Fig. 21).
@
Wrap hose around caddy in a counterclockwise direction (Fig. 22).
Hook tool connector (D) and 'SpinScrub' tool (E) onto caddy (Fig. 23).
Snap upholstery tool (F) into caddy (Fig. 24).
Page 9
Hose caddy
You can either store the hose caddy on the cleaner or remove it
to store separately.
To store caddy on the cleaner:
}_ Slide tabs (G) on caddy into slots on back of" cleaner (Fig.
25).
}_ Hook top of caddy to cleaner ([4).
Wrap cord around cord hooks (_) on caddy (Fig. 26). Rotate top hook to release cord.
To remove caddy Dora the cleaner:
Lift caddy off cleaner (Fig. 27).
1_ Wrap cord around cord hooks (J) on back of cleaner (Fig.
28). Rotate bottom hook to _lease cord.
Choose ON for normal cleaning of carpet.
Choose OFF when brushing is not desired.
Push 'Clean Surge' button (K) to release extra cleaning solution. Use the 'Clean Surge' button when cleaning heavily soiled areas
of carpet (traffic areas, spots, etc.)
Sr_eaNOcleaning solution removes all stains from all carpets. -"N
in removal varies with the type of spill, time passed before I
moval, carpet material, and carpet type. }
i/
@
I j
Continued _ 9
Page 10
1 Remove lightweight furniture (tables, lamps, etc,) from area to be deaned,
Protect any remaining ftu-nitm-e by pinning up furniture skirts and placing
aluminum foil or plastic under bgs.
2 Vacuum carpet thoroughly to remove loose dirt, hair, lint and other debris
(Fig. 31).
"h
3
¸¸¸¸¸¸¸5¸¸¸¸
Test detergent for colorfastness on a hidden area of carpet. VVet a white cloth or p_;_per towel with some detergent. Gently rub onto a
hidden area of carpet. Wait ten minutes. Blot with white cloth or paper towel
and check for color transfer.
Pretreat spots, stains and high traffic areas with HOOVER Spot and Stain
Spray (Fig. 32). Spray spot or area with Spot and Stain Spray. Then proceed with the next
cleaning steps.
For stubborn spots or stains, refer to the stain guide included with your cleaner.
Fill solution tank with hot tap water and proper amount of HOOVER
detergent (see page 5) (Fig. 33).
Use only HOOVER brand detergents in your deep cleaner. Other brands may damage the deep cleaner.
Plan your cleaning to avoid walking on wet carpet. Start at tile end of the
room farthest from tile exit and work in small sections (Fig. 34).
Step on handb release pedal and lower handb. Turn cleaner ON.
Squeeze and hold trigger (A) to release cleaning solution (Fig. 35). Push
8 cleaner forward SLOWLY then pull it back SLOWLY.
Use 'Cban Surge' button (B) in heavily soiled areas (Fig. 35).
lO
9 Let go of trigger and push cleaner over same area to pick up dirty solution
without putting down more solution. Continue using dry strokes until you
see only a little solution coming up through the nozzb (front of cleaner_.
Do not make the carpet too wet! Use no more than two sets of fbrward and
10 backward strokes while rebasing solution. Always follow with dry strokes -
the more the better.
11
12 Increased air circulation (open doors, turn on fans, etc.) will help carpet dry
13 Vacuum thoroughly after carpet has dried. This will reduce any shading left
Listen carefully! When the motor sound changes (rises in pitch), the recovery tank needs to be emptied,
When water has reached thelulllinein the recovery tank,the cleanerwill
NOT pick up dirty solution.
Allow carpet to dry. Avoid walking on tile carpet until it is dry.
thoroughly to prevent the growth of mold or mildew.
by the deep cleaner's brushes.
Page 11
¸¸1¸¸¸¸¸¸
Check fabric cleaning code (Fig. 36). Look on the flwniture mamlfacturer's
tag for a 'W' 'WS'or code. These codes indicate that it is alright to use your
deep cleaner to clean the upholstery. Do not use the deep cleaner on upholstery marked 'S', 'X' or 'Dry Clean
Only'.
2
5
6
¸7¸¸¸¸
Vacuum upholstery thoroughly with your vacuum cleaner's attachments.
Test detergent for colorfastness on a hidden area of upholstery. Wet a white cloth or paper towel with some detergent. Gently rub onto a
hidden area of upholstery. Wait ten minutes. Blot with white cloth or paper towel and check for color transfer.
Pretreat spots and stains with HOOVER Spot and Stain Spray (Fig. 37).
Spray spot or area with Spot and Stain Spray. Then proceed with the next cleaning steps.
For stubborn spots or stains, refer to the stain guide included with your
cleaner.
Fill solution tank with hot tap water and proper amount of HOOVER deter- gent (see page 5)(Fig. 38).
Use only HOOVER brand detergents in your deep cleaner. Other brands may damage the deep cleaner.
Attach hose and tool as described in Figs. 13-19 (Fig. 39).
Place handle in full upright position. Turn cleaner ON.
¸¸¸¸¸8
9
10
l _, Increased air circulation (open doors, turn on fans, etc.) will help upholstery
Squeeze and hold trigger (A) to release cleaning solution. Gently press tool
into fabric and slowly pull the tool over the fabric (Fig. 40).
Let go of trigger and pull tool over same area to pick up dirty solution with-
out putting down more solution. Continue using dry strokes until you see only a little solution coming up through the tool.
Do not make the upholstery too wet! Use no more than two strokes while releasing sohltion. Always follow with dry strokes - the more the better.
Listen carefully! When the motor sound changes (rises in pitch), the recovery tank need to be emptied.
When water has reached the full line in the recovery tank, the cleaner will NOT pick up dirty solution.
Allow upholstery to dry. Avoid using upholstery until it is dry.
dry thoroughly to prevent the growth of mold or mildew.
Continued -P 11
Page 12
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible leaks.
_,- Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
_,- Wipe debris off nozzle and front of cleaner with a damp cloth.
B
_,- Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
(B) up from bottom of cqeaner (Fig. 42).
_,- Press on upper portion of nozzle to snap in place.
Clean the brushes
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible leaks.
_,- Tilt cleaner back so handle rests on the floor:
_,- Pull brush assembly firmly to remove (Fig. 43).
_,- Rinse brushes under running water.
D
_,- Align posts (C) on brush assembly with slots (D) in cleaner
(Fig. 44).
_,- Turn brushes slightly, to align square post (E) with square hole
(F) in cleaner (Fig. 44).
12
_,- Press brush assembly firmly and snap in place.
Clean the brush filter
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible
leaks.
_,- Tilt cleaner back so handle rests on the floor.
_,- Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
_,- Wipe debris off filter.
_,- Slide filter back into place.
Page 13
,/ Empty solution tank and rinse thoroughly.
,/ Place empty solution tank on deep cleaner. Turn deep cleaner ON. Squeeze trigger and push
deep cleaner forward and back several times. This will clear any solution remaining inside the
cleaner.
,/ Empty recovery tank, rinse thoroughly and let air dry.
_/ Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep
cleaner on a carpeted or wood surface.
The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings.
To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factorv Service Center or Authorized Hoover Warranty Service Dealer (Depot) by:
,/ Checking the Service Sec tion of The Hoover Company on-line at www.hoover.com OR
,/ Checking the list of Factory Service Centers provided with this cleaner OR
_/ Checking the Yellow Pages under "Vacuum Cleaners - Household" OR
,/ Calling 1-800-944-9200 for an automated referral of authorized service outlet locations
(U.S. only)
Do not send your cleaner to The Hoover Company in North Canton for serv]ce: this will only result in delay.
If further assistance is needed, contact The Hoover Company Consumer Response Center. North Canton, Ohio 44720. Phone: 330-499-9499.
In Canada. contact Hoover Canada. Burlington, Ontario LTR 4A8. Phone: 1-800-263-6376.
Always identify your cleaner by the complete model number when requesting information or order-
ing parts. (The model number appears on the back of the cleaner.)
Continued -P 13
Page 14
Full One Year
Usethelistbelowto help solveminor problems.
Deep cleaner won't run
Low suction
.7.leaning solution won't :tispense
Brushes won't rotate
¢' Make sure the cleaner is
plugged in firmly.
,/Check the fuse or breaker.
,/Empty the recovery tank; it
may be full and the auto- matic shut-off engaged.
¢' Make sure recovery tank cap
is securely latched.
,/Make sure solution tank is
securely in place
,/Refill the solution tank if it is
empty
,/Clean brush filter as
described in Fig. 45.
,/Set Brush Speed Selector to
ON.
Warranty
(Domestic Use)
Your HOOVER® appliance is war- ranted in normal household use, in accordance with the Owner's
Manual against original defects in material and workmanship for a period of one full year from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in correct operat-
ing condition during the warranted period. This warranty applies when the appliance is purchased in the United States including its territories and possessions, or in Canada or
fi'om a U. S. Military Exchange. Appliances purchased elsewhere are covered by a limited one year war- ranty which covers the cost of parts only. This warranty does not apply if the appliance is used in a commercial or rental application.
This warranty only applies when the product is in use in the country or territory in which it is purchased.
Warranty service can only be obtained by presenting the appliance to one of the following authorized warranty service outlets. Proof of purchase will be required before ser-
vice is rendered.
Low suction in hose during :ool use
14
,/Make sure recovery tank cap
is securely latched.
,/Disconnect hose from cleaner
and check for blockage in hose.
1. Hoover Factory Service Centers.
2. Hoover Authorized Warranty Service Dealers (Depots).
For an automated referral of autho- rized service outlets in the U.S.A., phone 1-800-944-9200 OR
visit The Hoover Company on-line at www.hoover.com
This warranty does not cover pick
up delivery, or house calls; however,
if you mail your appliance to a Hoover Factory Service Center for
warranty service, transportation will
be paid one way. While this warranty gives you spe-
cific legal rights, you may also have other rights which vary fl'om state to
state. If fllrther assistance is needed, or if
there are questions concerning this warranty or the availability of war- ranty service outlets, write or phone the Consumer Response Center, The Hoover Company, 101 East Maple
St., North Canton, Ohio 44720, Phone 1-330-499-9499.
In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8,
1-800-263-6376.
Page 15
I5
Loading...