Hoover F6026910, F6025910 Owner’s Manual

HOOVER

Stea Vac .

Widepath _

The Easy to Use Deep Cleaner

Congratulations on your purchase

SteamVac TM Widepath cleaners have 6 rotating

brushes that deep clean carpets and scrub

bare floor!!

SteamVac TM Widepath
Deep Cleaner cleans

carpet fibers by applying
hot tap water and

cleaning solution.

www, hoover.com

FULL YEAR

WARHANTY

Fill' in and Retain

This HOOVER deep cleaner is

designed for deep cleaning carpet,
rugs, carpeted stairs and upholstery.

The model and serial numbers are

located on the data label on the back
of the handle.

For your personal records, please

enter the COMPLETE model and serial

numbers in the spaces provided and
retain this information.

Your deep cleaner is model

and has serial number

Owner's

Manual

ENGLISH --> pp. 1-14
ESPANOL -_ pbg. 15-23

FRAN(_AIS -_ p. 24-32

Review this manual before

operating deep cleaner

Important Safeguards!

When using an electrical appliance, always follow basic

READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.

precaution, including the following:

It is suggested that you attach your

sales receipt to this owner s manual.

Verification of date of purchase may

be required for warranty service of

your Hoover product.

Index

Important safeguards .......... 2

Assembly ................... 4-5

Carton contents .............. 3

Howtouse .................. 6-8

Agitator speed selector ....... 7

Automatic "shut-off". ......... 7

Deep cleaner description ...... 6

Emptying the recovery tank .... 8

Filling the clean solution tank. 7-8

How to clean

After cleaning ............... 9

Before you begin ............ 9

Carpet cleaning ............. 10

Cleaning bare floors ...... 10-11

Clean Surge"* Feature ....... 10

Picking up spills ............ 10

Using the tools ............. 11

Attaching tools ............ 11

Cleaning carpeted stairs..... 12

Cleaning upholstery ....... 13

Scrub module .............. 11

Maintenance

Headlight replacement ....... 13

If you have a problem ........ 14

Lubrication ................ 13

Service ................... 14

Storage ................... 13

Warranty .................... 14

© 1993, !999 The Hoover Company

www.hoover.com

2

WARN, NG: To reduce the risk of fire,electriCshock,or injury:

• Use indoors only.

• Use only on surfaces moistened by the cleaning process or small spills. Do

not immerse product.
Connect to a properly grounded outlet only. See "Grounding Instructions".

Do not clean over floor electrical outlets.

Do not use without tanks in place.

Use extra care when cleaning on stairs. Do not place deep cleaner on stairs.
Use deep cleaner only for its intended use as described in the instructions.
Use only attachments recommended by The Hoover Company; others may

cause hazards.

• The use of an extension cord is not recommended. If an extension cord is
absolutely necessary, use at least a 16 gauge 3-wire cord which has a 3-prong
grounding type plug and a 3-pole receptacle that accepts the machine plug.

• Unplug deep cleaner when not in use.Turn off all controls before unplugging.

• Unplug before connecting the powered hand tool.

• Always disconnect cord from electrical outlet before servicing the deep cleaner.

• Do not unplug by pulling on cord.To unplug, grasp the plug, not the cord.

• Never handle plug or appliance with wet hands.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull

cord around sharp edges or corners. Do not run appliance over cord. Keep
cord away from heated surfaces.

• Do not use with damaged cord or plug. If appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, take it to a

Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer.
Close supervision is necessary when any appliance is used by or near

children. Do not allow deep cleaner to be used as a toy or to run unattended at
any time.

• Do not point tools toward people or pets.

• Use only commercially available floor cleaners intended for machine

application. Do not use any type of wax with deep cleaner.

• To assist In reducing drying time, be certain the area is well ventilated when

using detergents and other cleaners with this machine.

• Keep detergents and other cleaners out of children's reach.

Do not use to pick up flammable or combustible liquids such as gasoline or
use in areas where they may be present.
Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic

material with this appliance.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.

Avoid picking up hard, sharp objects with the deep cleaner. They may damage
the machine.

Keep hair, loose clothing, fingers, feet and all parts of body away from

openings and moving parts.
Do not put any object into openings. Do not use with any opening blocked;
keep free of dust, lint, hair, and anything that may reduce air flow.

To help prevent matting and resoiling, avoid contact with carpets until they are

dry. Keep children and pets away from carpets until they are completely dry.
Store in a dry place. Do not expose machine to freezing temperatures.

Save these instructions!

Grounding
Instructions

This appliance must be grounded. If it

should malfunction or breakdown,
grounding provides a path of least resis-

tance for electrical current to reduce the
risk of electric shock. This appliance is

equipped with a cord having an equip-
ment-grounding conductor (C) and
grounding plug (A). The plug must be
plugged into an appropriate outlet (B)
that is properly installed and grounded in

accordance with all local codes and
ordinances

DANGER-

Improper connection of the equipment-
grounding conductor can result in the
risk of electric shock. Check with a qual-

ified electrician or service person if you
are in doubt as to whether the outlet is

properly grounded. Do not modify the
plug provided with the appliance - if it

will not fit the outlet, have a proper outlet

installed by a qualified electrician. This
appliance is for use on a nominal 120
volt circuit and has a grounding plug
that looks like the plug illustrated in
sketch (A).

A temporary adapter (D) may be used to
connec- :h£ ;_lug to a 2 pole receptacle
(E} if a properly grounded outlet is nor

available. The temporary adapter should
be used only until a properly grounded

outlet (B) can be installed by a qualified

electrician. The green colored rigid ear,

lug, or the like (F) extending from the
adapter must be connected to a perma-

nent ground (G) such as a properly
grounded outlet box cover. Whenever

the adapter is used, it must be held in
place by a metal screw. NOTE: In

Canada, the use of a temporary adapter
is not permitted by the Canadian

Electrical Code.

Carton contents

E F G

C D

85 @

A B

Unpack deep cleaner from the carton and identify the
parts shown. Remove and dispose of the packing,

A. Deep cleaner

B. Upper handle with powered hand tool and

scrub module

C. Bolts (2)
D. Nuts (3 - one extra included)

E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner

G. PreCleaner Spray
H. Bare floor attachment

Contained in carton with hose:

I. Hose

J. Stair/upholstery nozzle

K. Tool holder and screw (taped on rack under nozzle)
L. Hose holder

M. Crevice tool

The assembled cleaner will look like this
drawing.

Assemble handle

ttach upper handle

Remove clean solution tank (upper tank)

from deep cleaner.

[]

A1

A2

!

With hose hook (AI) and cord hook (A2) to
back of deep cleaner, push upper handle

down onto lower handle. Push bolts into
holes on front of handle, if bolts will not

go through hole easily handle is not
pushed completely down.

J

Attach hose holder

Position hose holder (B) onto handle by

matching tabs on rack with openings on
back of handle. Make sure holes for

bolts are aligned.

Replace clean solution tank (upper tank)
by positioning bottom first. Press on
tank handle to snap top of tank into
place.

Place nuts in recessed areas on back of

handle. Hold each nut in place while
tightening each bolt securely (from the
front of the handle) with a Phillips screw

driver.

Only two nuts are needed on this model.
The extra nut is not required but has

been provided for your convenience.

Attach tool holder

Remove tool and taped screw from
holder.

Insert projections on holder into slots on
back of cleaner.

When handle sections are completely

together, squeeze trigger (C) and

depress Clean Surge TM Button (D) on
upper handle.

You will hear a "snap" when the trig-
ger rod is in place.

Slide rack down into place. Insert screw
at (E) and tighten with a Phillips screw-

driver.

A1 _

jF

Presscordintocordcliponbackof

handle.Pullcordtightandwrapcord

aroundhooks(A2).

Slide crevice tool (G) into holder (some
models only).

Position stair/upholstery nozzle in holder
at base of cleaner and snap it into place

as shown at arrow.

Storing hose & tools

Store hose on holder by first positioning
hose in front section of holder.

Position hose on hose hook (AI).

insert end of bare floor attachment into
holder and snap into clip as shown.

While stretching hose, continue wrap-
ping it as shown. Snap end of hose con-
nector (F) into holder.

If hose connector does not reach holder,
stretch hose more thoughout the
wrapped part.

Powered hand tool

The powered hand tool is shipped in a
plastic bag for protection. Remove the

bag before using the tool by first open-
ing tool door.

To remove powered hand tool (H), pu[[ it

down and outward.

To reposition the tool, reverse this proce-

dure.

To remove the scrub module (I), grasp it

at the sides and pull it forward.

To reposition module, fit tabs in the stor-

age area into holes on back of module.

Push module to snap it securely into
position.

How to reattach tool
cover

Time tool cover is designed with a break-
away feature which allows it to snap free

if it is pushed open too far.

To reattach, align hinges of cover with

holes on sides of tool storage area.

Deep Cleaner Description

The assembled deep cleaner will look like the drawing

1

2 3

19 18 I 17

8 4_

g

10

11

2

13

14

15

16

8

20

1. Hand grip

2. Solution trigger: press to

release clean solution.

3. Clean Surge TM button

4. Hose

5. Hose holder: wrap hose
around holder and top hose
hook (6) for storage.

6. Hose hook

7. Cord hooks: wrap cord
around hooks for storage.

The top hook can be rotated

right or left for quick and
easy cord release.

8. Scrub module

9. Powered hand tool

!6

7

25

24

23

22

10. Carrying handle

11. Clean solution tank handle

12. Clean solution tank cap/
measuring cup

13. Clean solution tank: holds

cleaning solution.

14. Recovery tank handle:

raise handle to unlock tank
for removal; lower handle

forward to lock tank into

position.

15. Recovery tank: holds dirty
solution.

16. Brush speed selector:
slide selector to set brush

speed on HI, LO, or OFF

17. Hood

18. Headlight: on both sides of

the hood

19. Edge bristles: on bomb,sides
of the hood for cleaning
close to edges of carpet

20. Nozzle

21. Cleaning mode indicator:
shows either floor or tool

usage

22. ON/OFF pedal

23. Handle release pedal: step
on pedal to lower handle to
operating (floor) positron,

24. Stair/upholstery nozzle

25. Crevice tool

26. Bare floor attachment

This deep cleaner is intended
for household use,

Operate deep cleaner only at voltage specified on data plate on back of cleaner,

Plug deep cleaner into a properly grounded outlet.

t

J

B

ON/OFF pedal &

Handle release pedal

Step on pedal (A) to turn deep cleaner
on. Step on pedal again to turn deep

cleaner off.
Step on pedal (B) to lower handle to

operating position. Handle does not lock

into a single position but "floats" to allow
convenient operation.

Cleaning mode

indicator

Indicator will show a green window next
to FLOOR (C) when handle is in the
operating position for cleaning carpet

rugs and bare floors.

Indicator will show a green window next
to TOOL (D) when handle is in the

upright position for tool use on stairs,

upholstery, etc.

Deep cleaner automatically diverts

suction from FLOOR to TOOL when

handle is raised from the operating to

the upright position.

To transport

To move your deep cleaner from room to

room put handle in upright and locked
position tilt deep cleaner back on

wheels and push forward.

Thedeepcleanermayalsobeliftedby
placingahandundertheupperclean

solutiontankhandleasshown.

Automatic "shut off"

When the recovery tank (lower tank) is full
the automatic shutoff mechanism will shut

off the deep cleaner suction (suction will
be noticeably reduced).

At that time the yellow float disk will rise
to the top of the recovery tank lid (E).
The deep cleaner will no longer pick up
dirty solution and the motor sound will

become noticeably higher in pitch.

When this happens turn deep cleaner
off and empty recovery tank before
continuing use.

Check clean solution tank also; it may
need to be refilled.

Do not use without float and float

retainer in place. If broken or dis-
lodged, take to an Authorized Hoover

Service Center or Dealer for repair.

Brush speed selector

Your 'SteamVac' deep cleaner has three

agitator brush settings.
HI - for normal cleaning of carpet and

bare floors
LO - for gentle cleaning of carpets and

bare floors
OFF - for cleaning carpets and bare

floors when brushing is not desired.
(Such as when picking up liquid spills.

See page 10.)
Slide selector button to the desired set-

ting before cleaning.

5 OUNCES./

The tanks

Clean solution tank

(upper tank)

The clean solution tank holds the clean-
ing solution that is to be dispersed onto

the surface to be cleaned.

How to fill

Disconnect deep cleaner from

electrical outlet.

Place deep cleaner handle in the

upright, locked position.
To remove tank, press down on tank

handle and pull forward.

Carry tank to a sink.

For heavy traffic areas:

Pre-treat with HOOVER PreOleaner
Spray.

If you do not have access to the
PreCleaner Spray, double the amount
of HOOVER Detergent (use 2 capfuls
or 10 ounces per 1 gallon tank),

..........._150 mI

F

i

Rotate tank cap counterclockwise and
lift up to remove cap.

Turn cap (A) upside down to serve as a

measuring cup.
Using cap, measure detergent following

the chart below.

For carpet, carpeted stairs and uphol-

stery:

Flit cap to fill line (5 ounces) with HOOVER

Carpet/Upholstery Detergent.

For bare floors:
FitI cap to fill line (5 ounces) with HOOVER

Bare Floor Cleaner

Do not use Bare Floor Cleaner on carpet or
upholstery Do not use any t,,/pe of wax

with your 'SteamVac'Widepath deep

cleaner.

Contmued _ 7

UOTE: Use only HOOVERdetergents.

rhey are specially formulatedfor use
Kithyour 'SteamVac' deep cleaner.

CAUTION: Detergents contain

Anionic and Nontonic Surfactants.
Avoid contactwith eyes and skin. In
case of contact with eyes, flush with

coldwater for 15 minutes.In case of
contactwith skin, wash with water. If

Irritationpersists,call a physician.
For Medical Information(U.8.) call

1-800-752-7869.

p._ [,,.P-_ll

Replace cap, Rotate cap clockwise

until it locks In place. Cap must be
locked In place for proper perfor-
mance and to prevent leaking.

Pour detergent intotank. Fill tank to
fill line (B) (1 gallon) with hot tap

water.

To assure proper performance, use only
HOOVER cleaning detergent.

Position bottom of tank into unit and
press on tank handle to snap tank into

place.

If rubber ring (C) on cap has become

dislodged, reposition it with uneven
side against ledge (D) as shown.

Recovery tank

(lower tank)

The recovery tank holds the dirty solu-

tion that is picked up from the carpet.
When the recovery tank is full, the auto-

matic shut-off will engage (see page 7)
and the tank must be emptied.

How to empty

Turn deep cleaneroff and disconnect

from electrical outlet,

To prevent possible leaking, remove

clean solution tank (Fig.2-8) by pressing
down on tank handle and pulling for-

ward; set tank aside (do not set tank

on furniture).

Step on handle release pedal (Fig. 2-2)
and lower handle until it rests on the

floor.

Raise handle to carrying position

(straight up) to unlock tank from base of
deep cleaner. Lift tank from deep clean-

er and carry it to a sink or drain.

To remove tank lid, lower handle com-

pletely toward back of tank and lift off
lid.

Empty the tank and reposition the lid.

Forfull suction, it is importantthat

the recovery tank lid is properly
secured before cleaning.

Raise tank handle to carrying position to
place it into base of deep cleaner. Move

handle completely forward to lock tank
into place (see Fig. 2-15).

Raise handle of deep cleaner to upright
position and reposition upper clean

solution tanK.

Before you begin
cleaning

a. Vacuum thoroughly - For carpet, use

a HOOVER vacuum cleaner with an agi-
tator for best results. Vacuum upholstery
wth a vacuum cleaner with cleaning

tool attachments. Use a crevice tool to

reach into tufts and folds. Do not use

the 'SteamVac' deep cleaner as a dry
vacuum cleaner.

b. For upholstery, check cleaning

code - Use your HOOVER 'SteamVac'

'Widepath' deep cleaner only if the

upholstery fabric is marked with a "W"

(for "wet" clean) or "S/W" (for

"solvent/dry" or "wet" clean). Do not

clean fabric marked "S" ("solvent/dry"

clean only). If your upholstery does not

have a code, seek professional assis-

tance.
c.Test for colorfastness - Mix detergent

and water according to the instructions

under "Fill clean solution tank", Figs. 2-8 to

2--t4. Wet a white absorbent cloth with the
solution. In a small, hidden area, gently rub
the surface with the dampened cloth. Wait

ten minutes and check for color removat or

bleed with white paper towel or cloth. If sur-
face has more than one color, check all col-
ors.

d. When cleaning entire floor, move
furniture out of area to be cleaned

(may not be necessary if only high traffic
areas are to be cleaned). For furniture
too heavy to move, place aluminum foil
or wax paper under legs. This will pre-
vent wood finishes from staining carpet.

Pin up furniture skirts and draperies.
e. Pretreat spots and heavy traffic

areas with HOOVER ® PreCleaner-
Test PreCleaner for colorfastness by first

spraying it on a hidden area; wait ten

minutes and blot with white paper towels

or cloth.

If no color change is visible, spray

PreCleaner onto spots and traffic areas.
Wait at least ten minutes. Use your

'SteamVac' 'Widepath' deep cleaner to pick

up PreCleaner and spot. Repeat until spot

is removed; carefully scrub with a house-

hold scrub brush if necessary

Do not saturate carpet or upholstery with
PreCIeaner.

If you do not have access to the

PreCleaner Spray, double the amount
of HOOVER Detergent (use 2 capfuls
or 10 oz. per I gallon) in the clean

solution tank.

No cleaning solution removes all SL_Jnsfrom

all carpets. Stain removal vanes with the
type of spill, time elapsed before removal.
carpet material, and carpet type

f.To prevent staining, use plastic or alu

minum foil to protect wood or metal sur-
faces from possible water spray

g. To avoid wetting and possible damage
to wood floors underneath area rugs/car-
pet, _ move area rugs/carpet to a non

wood bare floor surface _ place waterproof

material (e.g. plastic) underneath them

before cleaning.

See pages 10-13 for instructions on various

cleaning tasks.

After cleaning

a. Allow carpet or upholstery to dry. To

help prevent matting and resoiling the
carpet, keep children and pets away
from surface until _tis completely dry. If
it is necessary to walk on damp car-
pet, place towels or white cloths on the

traffic areas.

If furniture must be replaced before the

carpet is dry, place plastic or aluminum
foil under legs of furniture so metal

slides or wood finishes will not stain the
carpel

e. Remove lint from filter screen located
on bottom of cleaner as follows. Note:

When brushes seem to be rotating

slowly, disconnect deep cleaner from

eleetical outlet and check and clean
this screen.

Tilt cleaner back so handle rests on floor.

Squeeze frame, lift and pull it out. Wipe
off screen and push frame back into
place

b. If desired, the carpet may be rinsed.
Rinsing is not necessary for cleaning,
but it may improve the surface's appear-
ance after it is dry.

If rinsing is desired, be careful not to
over-wet the carpet or upholstery.
Allow time for carpet or upholstery to

dry completely between cleaning and
rinsing. To rinse, follow the same proce-
dure for cleaning only using hot tap

water with no detergent in the upper

clean solution tank.

c. Empty tanks, rinse with clear water

and let air dry. Rinse the solution tank
cap and recovery tank lid and let air dry.

Return cleaner to upright position.

f. If desired, vacuum thoroughly after

carpet has completely dried. This will

help reduce any shading left by the

deep cleaner's brushes.

To clean nozzle

If lint or other debris becomes lodged in

nozzle, do not attempt to remove

nozzle cover.

Pour one to two cups of clear water on a
non-carpeted floor. Do not pour water

onto a wood floor.

Pick up the water with your deep clean-
er. Repeat as necessary until debris is

flushed out of nozzle.

/

d. Remove lint from filter screen located
inside recovery tank.

To clean the outside of the machine,
wipe off dirt with a cloth dampened in

warm water and mild detergent. Do not

use solvent or petroleum based prod-

ucts to clean the machine.

Continued -_ 9

Read "Before you begin cleaning"
instructions on page 9.

1. Fill clean solution tank (upper tank)

with HOOVER CarpettUpholstery

Detergent according to instructions for
Figs. 2-8 to 2-14.

2. Move speed selector to LO for gen-

tle cleaning or HI for normal cleaning.

3. Dry hands and plug cord into a prop-

erly grounded outlet.
Do not clean over floor electrical out-

lets.

4. To avoid walking on damp carpet,
start at the end of the room farthest from

the door or path to sink where tanks will
be emptied and filled.

Step on handle release pedal and lower
handle to operating position; turn deep

cleaner ON.

5. Squeeze trigger to release cleaning
solution and slowly push deep cleaner

forward (equals one wet stroke).

6. Continue to squeeze trigger and
slowly pull deep cleaner back toward

you (second wet stroke). Release trigger
and slowly push deep cleaner forward

over area just sprayed with solution (dry
stroke). Then slowly pull deep cleaner
back toward you without squeezing trig-
ger (dry stroke).

7. Overlap strokes by 1 inch to help pre-
vent streaking.
Keep nozzle flat on floor for both for-

ward and reverse strokes.

8. For heavily soiled areas, repeat steps
5-7. Avoid saturating carpet, as noted

below.

9. For particularly soiled carpet or
spots, use the Clean Surge r_ button

(see following section). Avoid saturatrng
carpet, as noted below.

Note: To avoid saturating carpet, do

not use more than 4 wet strokes over

one area. Always end with dry
strokes.

It is best to alternate wet and dry
strokes as described above.

For best cleaning results and to aid ir_

faster drying of carpet, end with more

dry strokes. (Continue using dry strokes
until little water is visible passing

through the recovery tank lid.)

Empty recovery tank when the motor
sound becomes higher pitched and

there is a loss in suction (see

"Automatic shut-off", Fig. 2-6)

When finished cleaning, follow "After

cleaning" instructions on pages 9-10

Clean Surge TM Button

The Clean Surge' button can be used to
dispense extra solution when cleaning
particularly soiled areas of carpet or spots

To use, press 'Clean Surge' button while
squeezing solution trigger. For normal

solution spray, release button and contin-
ue to squeeze solution trigger.

How to attach bare floor
attachment

Disconnect deep cleaner from electri-
cal outlet.

To prevent possible leaking, remove
clean solution tank (Fig. 2-8) and recov-
ery tank (Fig. 2-15) before positioning

bare floor attachment.

Set tanks aside (do not set tank on furni-
ture).

1. With handle in upright position, tilt

cleaner back so that handle rests on the

floor.

10

Your deep cleaner may also be used to

pick up small liquid spills (1 gallon or
less, never to exceed 1/4 inch in

depth) on carpet, upholstery, or bare
floors.

1. For best results, pick up spills imme-

diately by placing the stair/upholstery
nozzle just above the spill and suction
up any residue on top of the carpet.

2. If the spill remains, place either the
stair/upholstery nozzle or floor nozzle

with brushes turned OFF in front of the

spill, pull the nozzle very slowly over the
spill initially with suction only

Repeat with spray and suction.

2. With foam strip (A) (located under the
netting) in position as shown, place

attachment on front of nozzle (B).

Make sure arrow on end of attachment
points in the direction as shown.

When picking up spills on bare floors,

use only the floor nozzle with the bare

floor attachment in place and speed

selector in the OFF position (this wil! help
prevent spreading the spill).

If a spot is left, the stair/upholstery no_Ie ts

generally more effective for removing it.
Although no cleaning solution can com-

pletely remove all spots, they can be treat-
ed by following the instructions provided
by the manufacturer of the carpet, uphol-

stery, or bare floor surface being cleaned

Do not use the deep cleaner to pick up

flammable or combustible liquids or
chemicals.

When finished, follow "After cleaning"

instructions on page 9.

3. Push attachment against nozzle while
rotating attachment downward until both
ends snap into place.

(Note: Some force may be required to

rotate and snap attachment into place.)

4. Return deep cleaner to upright posi-

tion. Lower handle and replace recovery

tank.

5. Raise handle to upright position and
reposition clean solution tank.

To clean floor

Read "Before you begin cleaning"
instructions on page 9.

Do not use the deep cleaner on hard=

wood floors.

1. Fill clean solution tank with HOOVER
Bare Floor Cleaner according to instruc-

tions for Figs. 2-8 to 2-14.

Do not use any type of wax with your

deep cleaner.

2. Move speed selector to the Lo or HI
position for scrubbing or OFF if
scrubbing is not desired.

3. Dry hands and plug deep cleaner
into a properly grounded outlet.

4. Step on handle release pedal and
lower handle to operating position; turn
deep cleaner ON.

5. To release solution, press trigger.
Slowly move deep cleaner forward and

backward over area to be cleaned.

6. To pick up dirty solution, release trig-
ger and slowly move deep cleaner over

area where solution has just been dis-

persed. Use both forward and reverse

strokes.

7. Empty recovery tank when the motor
sound becomes higher pitched and

there is a loss in suction (see "Automatic

shut-off", Fig.2-6)

8. When finished cleaning, follow "After
cleaning" instructions on pages 9-10.

Disconnect deep cleaner freom elec-

trical outlet and remove attachment

from nozzle. Rinse it in clear water. Do

not remove plastic screen or foam

from attachment.

Your model includes some combination
of the following tools.

A. Powered hand tool has rotating

brushes for extra scrubbing action on
small carpet areas, carpeted stairs and
upholstery. For some models, the
brushes can be removed for converting

to the scrub module.

C L,_.,,#

D

B. Stair/upholstery nozzle has a built-in

brush to help provide the scrubbing
action some spots may need for

removal.
C. Scrub module with detachable
scrub pad attaches to the base of the

powered hand tool (in place of brush
module). Can be used to scrub stubborn
areas such as scuff marks, dried spills,

and in hard to reach areas on hard sur-
faces.

D, Crevice tool can be used to clean
along edges of carpet, carpeted stairs

and on upholstery.

C

How to attach tools

Disconnect deep cleaner from electri-
cal outlet.

1. Place handle in upright position and
remove hose from rack.

All tools attach to the hose in the same

manner:

2. Connect tool to hose by sliding it onto
connector until the tab (C) locks it

securely.

Using your thumb, push forward and up

on the latch (D) to remove tool as

shown.

Before using tool

It may be necessary to remove air from

the system ("prime the pump") so the

clean solution will flow to the tool. Follow
these steps:

1. Attach tool to hose and turn the deep
cleaner ON.

2. Put the tool on a hard surface or
against your hand to block off the suc-

tion.

3. Wait a few seconds (can take up to 15

F

seconds). Then squeeze the trigger and
begin cleaning.

Follow the instructions on pages 12-13

for the appropriate cleaning task.

Attaching scrub module

1. Open the tool door and remove the
powered hand tool.

2. Grasp the sides of the brush module
and lift it from the base (E).

3. Pull scrub module from deep cleaner
and snap it onto the base.

Note: It may be necessary to rotate the
scrub module (F) slightly so it will align

properly to the base.

Using the scrub tool

With a little solution, test the scrub
tool on a hidden area before using on

the desired surface. If no surface
change is visible, continue to use as

described below.

1. Fill clean solution tank with HOOVER
Bare Floor Cleaner according to instruc-

tions for Figs. 2-8 to 2-14.

2. Hold scrub tool above area to be
cleaned and press trigger to dispense

solution.

3. Release trigger and scrub area with

tool. Pick up dirty solution with

squeegee as shown.

Continued -) 11

After using scrub tool
To clean scrub pad, pullitoffmodule.

Wash it in water with mild detergent.

Rinse and let air dry.
Pad must be completely dry before reat-

taching to module and storing on deep

cleaner.

Replacement pads may also be pur-
chased. Ask for HOOVER part no.

40308001.
To store stub module, remove scrub

module from tool in same manner as
removing the brush module.

Align openings on back of module with

tabs in storage area (G).

Push module into position.

Read "Before you begin cleaning"
instructions on page 9.

1. Place handle in upright position.
Agitator brushes will not rotate while
handle is in upright position.

2. Fill clean solution tank with HOOVER
Carpet/Upholstery Detergent according

to instructionsfor Figs. 2-8 to 2-14.

3. Attach tool to end of hose.

4. Hose length may require that machine
be placed at the top of the stairs to
clean upper half of stairway and at bot-

tom of stairs to clean lower half.
To prevent machine from falling, use

extra caution when cleaning on stairs.

Do not place deep cleaner on stairs.
Do not point tools toward people or

pets.

5. Dry hands and plug deep cleaner into
a properly grounded outlet.

6. Turn deep cleaner ON. If necessary,
refer to "Before using tool" section to
remove air from the system.

12

After using tool

1. Follow steps a and b for "After clean-

ing" on page 9.

2. Rinse tool and hose by filling sink

with a small amount of water. Turn

deep cleaner ON and pickup the water

with the tool.

7. Pro-spray the carpeted stair by hold-
ing the tool (A) or (B) about one inch
above the carpet and push it forward

while pressing the trigger (equals one
wet stroke).

8. Position tool against the riser and slightly
press it into carpet pile. Press the trigger and

pull the tool slowly over the carpet (second

wet stroke). Release trigger at end of stroke.

3. Drain hose by turning deep cleaner
ON and holding end of hose up for sev-

eral seconds. Do not press trigger.

4. Disconnect deep cleaner from electri-
cal outlet.

5. Drain solution tube (located inside
hose) by pointing end of hose in sink

and pressing trigger.

6. Proceed with steps c, d, and e, for
"After cleaning" on page 9.

9. Lift tool, and position it against riser.

Pull tool slowly over carpet without
pressing trigger (dry stroke).

It is best to alternate wet and dry strokes

as described above. End with more dry
strokes to aid in faster drying of carpet.

10. Overlap strokes by 1/2 inch to help

prevent streaking.

To avoid saturating carpet,do not use
more than 4 wet strokes over any one
area, Alwaysend with drystrokes.

If additional cleaning is necessary, wait
until the carpet is completely dry before

using the tool again.

11. Empty recovery tank when the motor
sound becomes higher pitched and
there is a loss in suction (see "Automatic

shut-off", Fig. 2-6).

When finished cleaning, follow "After

cleaning" instructions on page 9 and
"After using tool" instructions on page 12.

Read "Before you begin cleaning"
instructions on page 9.

£e sure to check the cleaning code on
your upholstery. Use your deep cleaner
only on upholstery marked "W" or

"W/S'.
1, Place handle in upright position.

Agitator brushes will not rotate while

handle is in upright position.

2. Fill clean solution tank with HOOVER
Carpet/Upholstery Detergent according

to instructions for Figs. 2a-8 to 2-1 4.

3. Attach tool to end of hose.
Do not point tools toward people or

pets.

4. Dry hands and plug deep cleaner into

a properly grounded outlet.

5. Turn deep cleaner ON. If necessary,
refer to "Before using tool" section to
remove air from the system.

6. Gently press the tool onto the fabric.

Press the trigger and slowly pull the noz-
zle over the fabric.

7. Overlap strokes by 1/2 inch to help
prevent streaking.

Make additional strokes without pressing

the trigger to remove more moisture.

8. To clean in corners or creases, lift the

tool one-half inch from the fabric and

press the solution trigger. The crevice

tool (included in some models) is very

useful for this task.

9.Vacuum up the solution with the tool
without pressing the trigger.

10. For heavily soiled areas, it may be

-; \f

necessary to repeat the cleaning
process. Make crisscrossing strokes to
the original pattern; overlap each pass.

Make no more than 2 passes with the
solution over any one area to prevent
over-wetting and damage to fabric.

If additional cleaning is necessary, wait
until the upholstery is completely dry

before using the tool again.

11. Empty recovery tank when the motor

sound becomes higher pitched and
there is a loss in suction (see "Automatic
shut-off", Fig. 2-6).

When finished cleaning, follow "After
cleaning" instructions on page 9 and

"After using tool" instructions on page 12.

Headlight
replacement

What to buy

The deep cleaner uses a 7 volt, wedge

base type bulb, HOOVER part no.

27313106.

Where to buy

Bulbs may be purchased from autho

rized Hoover dealers (Depot), Hoover
Factory Service Centers, or through The
Hoover Company online at

www.hoover.com

Storage

Before storing:

• Empty solution tank and rinse
thoroughly with clean wafer.

• Replace empty solution tank and
turn deep cleaner ON. Squeeze
trigger and push deep cleaner for-

ward and back several times to
expel any solution remaining in the

deep cleaner's system. (Do not use
deep cleaner on wood floors.)

How to replace

Turn cleaner off and with dry hands,

disconnect deep cleaner from electri-

cal outlet,

1. Using a Phillips screwdriver, remove

the screw as shown and lift off lens.

• Empty recovery tank and rinse
thoroughly with clean water.

Allow brushes and underside of deep
cleaner to air dry thoroughly before

storing deep cleaner on a carpeted or
wood surface.

Do not store deep cleaner with a full

solution tank in place.

2. Pull old bulb straight out of socket.

3. Push new bulb straight into socket until
locked into place.

Excessive force is not required,
Reposition lens and secure with screw

Lubrication

The motor is equipped with bearings
which contain sufficient lubrication for

the life of the motor. The addition of

lubricant could cause damage. Do not

add lubricant to motor bearings,

13

If a minor problem occurs, it usually can
be solved quite easily when the cause is

found by using the check list below.

Possible cause
Possible solution

* Not firmly plugged in

• Plug unit in firmly

• No voltage in wall plug

• Check fuse or breaker

• Blown fuse/tripped breaker

• Replace fuse/reset breaker

Possible cause

Possible solution

• Recovery tank full/automatic

shut off engaged

• Remove and empty recovery tank

• Blockage in tool on end of hose

• Remove tool and clear blockage

• Recovery tank lid not on

correctly

• Make sure lid is on securely

Possible cause

Possible solution

• Solution tank not firmly in place

• Make sure tank is securely locked in
position

* Solution tank empty

. Refill tank according to instructions for

surface being cleaned

• Recovery tank lid not on

correctly

• Make sure lid is firmly in p/ace

. Pump needs to be "primed" (when

using tool)

• See "Before using fool" section, p. 11

Possible cause

Possible solution

• Dirty filter screen on bottom of unit

• Clean screen as shown in Fig. 3-2

• Speed selector on OFF

• Move speed selector to Low or Hi

Service

To obtain approved HOOVER service
and genuine HOOVER parts, locate the
nearest Hoover Factory Service Center

or Authorized Hoover Warranty
Service Dealer (Depot) by:

• checking the Yellow Pages under
Vacuum Cleaners - Household" OR

• checking the list of Factory Service
Centers provided with this cleaner

OR-

* calling 1-800-944-9200 for an

automated referral of authorized
service outlet locations (U.S. only)

OR-

. checking the Service section of The

Hoover Company on-line at

www.hoover.com

Do not send your cleaner to The Hoover
Company in North Canton for service,

this will only result in delay.

If further assistance is needed, contact

The Hoover Company Consumer

Response Center, North Canton, Ohio

44720 Phone: [phone].

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,

Phone: [phone].

Always identify your cleaner by the com-

plete model number when requesting
information or ordering parts. (The

model number appears on the bottom of

the cleaner.}

Full Two Year

Warranty

(Domestic Use)

Your HOOVER@ appliance is warranted

in normal household use, in accordance

with the Owner's Manual against original

defects in material and workmanship for
a period of two full years from date of
purchase. This warranty provides, at no
cost to you, all labor and parts to place

this appliance in correct operating con-

dition during the warranted period. This

warranty applies when the appliance is

purchased in the United States including
its territories and possessions, or in

Canada or from a U. S. Military

Exchange. Appliances purchased else-

where are covered by a limited one year
warranty which covers the cost of parts
only. This warranty does not apply if the
appliance is used in a commercial or

rental application.

Warranty service can only be obtained

by presenting the appliance to one of
the following authorized warranty ser-
vice outlets, Proof of purchase will be

required before service is rendered.

1, Hoover Factory Service Centers.

2. Hoover Authorized Warranty
Service Dealers (Depots).

For an automated referral of autho-

rized service outlets in the U.S.A.,

phone [phone] OR

visit The Hoover Company on-line at

www.hoover.com
This warranty does not cover pick up

delivery, or house calls; however, if you

mail your appliance to a Hoover Factory
Service Center for warranty service,

transportation will be paid one way.

While this warranty gives you specific

legal rights, you may also have other
rights which vary from state to state.

If further assistance is needed, or if
there are questions concerning this war-
ranty or the availability of warranty ser-
vice outlets, write or phone the
Consumer Response Center, The

Hoover Company, 101 East Maple St.,

North Canton, Ohio 44720,

Phone [phone].

In Canada, contact Hoover Canada,

Burlington, Ontario L7R 4A8,

1-800-263-6376.

]4

Carpet / Upholstery ,2_
Detergent

64 oz.

40301064

PRICE

EACH

$12.99

Detach Order Form Here

TOTAL

Check or Money Order payable to: The Hoover Company

Q Visa {3 MasterCard Exp, Date: __

Part No. 58549-032 R1•

16oz. 40302016
=reCleaner

]2 oz, 40302032

_are Floor Cleaner
32oz.

_-0303032

9are Floor
3leaningTool

_-8417004

Nozzle Clean-out
tool

39514001

Scrub Pads @'for Scrub Module) 2 per pack
_t0308001

ADD YOUR APPLICABLE STATE TAX +

{_I

$5,99

$5.99

$1.00

$4.50

TOTAL MERCHANDISE $

SHIPPING & HANDLING + $4.50

TOTAL COST $

Card Number

Name on Card

Signature (Required)

Daytime Phone & Area Code

"""' "' ' IIIIIIIII ,,ll

The Hoover Company

101 East Maple Street
North Canton, OH 44720

No. of Items [ I
Ordered: J

Name

Street

(3 40301064
Q40302016

Q 40302032
_340303032

D 48417004

[3 39514001
[3 40308001

I I IIII IIn

Use this form to order HOOVER detergents and accessories
directly from THE HOOVER COMPANY, NORTH CANTON,

OHIO. These items will be shipped to your home, They may
also be purchased by visiting us online at www.hoover.eom

or from your local Hoover dealer or Hoover Factory Service
Center. See your Yellow Pages for listings.

Please detach order form and enclose with your check,
money order, or credit card information.
Mail-in and online orders limited to U.S, residents only.

city

State

Zip

Please Print Your Name and Address carefully in Ink.

Please allow 3 to 4 weeks for delivery.

Please complete this entire form!