Hoover F5895-900, F5894-900, F5892-900 Owner’s Manual

HOOVER
The Easy to Use
Deep Cleaner
LS
with automatic tool
conversion
Congratulations on your purchase.*
SteamVac TM LScleaners have 5 brushes that deep clean carpets and scrub bare floors.*
SteamVac TM Deep Cleaner cleans carpet fibers by applying hot
tap water and cleaning solution,
www.hoover.com ®
Fill in and Retain
This HOOVER deep cleaner is designed for deep cleaning carpet,
rugs, carpeted stairs and upholstery.
The model and serial numbers are
located on the data label on the back
of the handle.
For your personal records, please
enter the COMPLETE model and serial numbers in the spaces provided and
retain this information.
Your deep cleaner is model
Owner s Manual
!
ENGLISH -_ pp. 1-14 I ESPANOL -4. p_g. 15-23
FRANQAIS -_ p. 24-32
Review this manual before operat- ing deep cleaner
Important Safeguards!
I
I
and has serial number
It is suggested that you attach your
sales receipt to this owner s manual.
Verification of date of purchase may be required for warranty service of your Hoover product.
Index
Important safeguards .......... 2
Unpacking deep cleaner ......... 3
Assembling deep cleaner ...... 4-5
Deep cleaner description ........ 6
General operation ............ 6-9
Filling the clean solution tank. 7-8 Emptying the recovery tank .. 8-9
Agitator speed selector ....... 7
Brush Indicator .............. 7
How to use
Before you begin ............ 9
After cleaning ............ 9-10
Cleaning carpet ............ 10
Picking up spills ............ 10
Cleaning bare floors ...... 10-f 1
Using the tools ............. 11
Cleaning carpeted stairs.. 11-12
Cleaning upholstery ....... 12
If you have a problem ......... 13
Lubrication .................. 12
Service ..................... 12
Storage ..................... 12
Warranty .................... 13
<o1993,1999 The Hoover Company
wwwhoover.com
WARNING' To reduce the risk of fire, electric
Use indoors only. Use only on surfaces moistened by the cleaning process or small spills. Do not immerse product.
Connect to a properly grounded outlet only. See "Grounding Instructions".
Do not clean over floor electrical outlets. Do not use without tanks in place.
Use extra care when cleaning on stairs. Do not place deep cleaner on stairs. Use deep cleaner only for its intended use as described in the instructions.
Use only attachments recommended by The Hoover Company; others may
cause hazards.
The use of an extension cord Is not recommended. If an extension cord is
absolutely necessary, use at least a !6 gauge 3-wire cord which has a 3-prong
grounding type plug and a 3-pole receptacle that accepts the machine plug.
Unplug deep cleaner when not in use. Turn off all controls before unplugging. Unplug before connecting the powered hand tool.
Always disconnect cord from electrical outlet before servicing the deep cleaner. Do not unplug by pulling on cord.To unplug, grasp the plug, not the cord.
Never handle plug or appliance with wet hands. Do not pull or carry by cord, use cord as a handle, close door on cord or pull
cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not use with damaged cord or plug. If appliance Is not working as it should, has been dropped, damaged, left outdoors, or dropped Into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer. Close supervision is necessary when any appliance is used by or near
children. Do not allow deep cleaner to be used as a toy or to run unattended at
any time.
Do not point tools toward people or pets. Use only commercially available floor cleaners Intended for machine
application. Do not use any type of wax with deep cleaner.
To assist In reducing drying time, be certain the area Is well ventilated when using detergents and other cleaners with this machine.
Keep detergents and other cleaners out of children's reach. Do not use to pick up flammable or combustible liquids such as gasoline or use In areas where they may be present. Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic material with this appliance. Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
Avoid picking up hard, sharp objects with the deep cleaner. They may damage the machine.
Keep hair, loose clothing, fingers, feet and all parts of body away from openings and moving parts. Do not put any object Into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
To help prevent matting and resoiling, avoid contact with carpets until they are dry. Keep children and pets away from carpets until they are completely dry.
Store in a dry place. Do not expose machine to freezing temperatures.
When using an electrical appliance, always follow basic
precaution, including the following:
READ ALL INSTRUCTIONS BEFORE USING APPLI-
, shock, or injury:
2 Save these instructions!
Grounding
Instructions
C
This applianc:e must be grounded. If it should rrlalfuriction or breakdownr
grounding provides a path of least resis- tance for electrical current to reduce the
risk of electric shock. This appliance is eqLlipped with a cord having an eclui p-
mer_t_grou_lding conductor (C) and grounding plug (A), The plug must be plugged into an appropriate outlet (B)
that is properly installed and grounded in
accordance with all local codes and
ordinances,
DANGER-
Improper connection of the equipment- grounding conductor carl result in the
risk of electric shock. Check with a qual- ified electrician or service person if you
are in doubt as to whether the outlet is properly grounded. Do not modify the
plug provided with the appliance - if it will not fit the outlet, h;_ve a proper outlet installed by a qualified electrician, This
appliance is for use on a nominal 120 volt circuit and has a grounding plug
theft looks like the plug ilklstrated in ,_ket_ h (A).
A temporary adapter (D) may be IJsed to
connect this plug to a 2-pole receptacle
(E) if a properly grounded outlet is not
available. The temporary adapter should
be used only until a properly grounded
outlet (B) can be installed by a qualified electrician. The green colored rigid ear,
lug, or tile like (F) extending from the
adapter must be connected to a perl_la-
nent ground (O) such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw. NOTE: In
Canada, the use of a temporary adapter
is not permitted by tile Canadian Electrical Code.
Carton contents
iml
E F G
C D _ H
A
Unpack deep cleaner from the carton
and identify the parts shown. Remove and dispose of the packing.
A. Deep cleaner
B. Upper handle with powered hand tool and
scrub module
C. Bolts (2)
D. Nuts (3 - one extra included) E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner (some models)
G. PreCleaner (some models)
H. Bare floor attachment
B
Contained in carton with hose: I. Hose
J. Stair/upholstery nozzle K. Hose rack and screw (taped on rack under nozzle) L. Clip for hose M. Nozzle clean-out tool (some models)
3
The assembled cleaner will look like lib
this drawing.
Assemble handle
m "
Attach upper handle
Remove clean solution tank (upper tank) from deep cleaner.
A
I
With cx_rd hook (A) to back of deep cleaner, push upper handle down onto lower had _
die, Push bolts intoholes on front of han- dle. If bolts will not go through hole easi-
ly handle is not pushed completely
down.
Place nuts in recessed areas on back of
handle. Hold each nut in place while
tightening each bolt securely with a
Phillips screw driver,
Only two nuts are needed on this model,
The extra nLlt is not required but has
been provided for your convenience,
Press cord into cord clip on back of handle. Pull cord tight.
4
When handle sections are corrlpletely together, squeeze trigger (B) on upper handle to snap trigger rod In place.
Attach hose clip
Push tab on side of clip into hole on side of handle,
Replace clean solution tank (upper tank) by positioning bottom first. Press
on tank handle to snap top of tank into place.
Pivot clip ;_rld push other tab into hole
at b_ck of hell'Idle to lock into place.
I
Attach hose rack
Remove tool and taped screw from rack.
Insert projections on rack into slots on back of cleaner,
Then continue wrapping hose as showrl
snapping end of hose connector into clip.
Slide rack down into place. Insert screw at (D) and tighten with a Phillips screw-
driver,
Position tool in holder ;_t b,_se of cleaner
and snoop it into place as shown at arrow.
Storing hose & tools
Store hose on rack by first positioning hose in front section of clip.
iim
Slide bare floor _:lttachl]-ient into holder as shown,
Powered hand tool
The powered hand tool is shipped in a plastic bag for protection. Remove the bag before using tile tool by first open- ing tool door,
T_ remove powered hand tool (E), pull it down and outwrlrd.
To repositiori the tool, reverse this pro- cedure,
T_ remove the scrub module (F), grasp it at the sides and pull it forward,
To reposition module, fit tabs in the stor- age area into holes on back of module,
Push module to snap it securely into position.
This is the proper storage location for
the module.
How to reattach tool
cover
The tool cover is designed with a break-
away feEiture which allows it to snap free if it is pushed open too f_lr,
To reattach_ aliqn hinges of cover with
holes on sides of tool storage area.
Loading...
+ 9 hidden pages