Hoover F5884-900, F5883-900, F5881-900, F5868-900, F5867-900 Owner’s Manual
...
SUPREME
DELUXE
ULTRA
SteamVac TMWith Attached
Tools And Automatic Tool
Conversion
SteamVacs with the automatic tool conversion
feature were first introduced in mid-1997. Fig. 1
Characteristics of the three types:
Supreme: No rotating brushes
Deluxe: Five rotating brushes (for carpet only).
Ultra: Five rotating brushes for carpet and a
powered hand nozzle for upholstery.
These are the third generation of Steam Vats made
by Hoover for the domestic market.
5 OUNCES/
15Oral
Easy,One-handed
tankremoval
liJ
All models have:
• 1 gallon tanks, solution and recovery
• 8 foot hoses
• Quick cord release (back of handle)
• Tool/floor mode indicator Fig. 2
• Automatic tool conversion
• 16 oz. pre-cleaner-spray bottle
• 16 oz. carpet/upholstery detergent
• Bare floor cleaning tool, fits front of nozzle. Fig. 3
• Upholstery nozzle
• 1 Speed motor
• Measuring eup/eap on solution tank.Fig. 4
• Over flow float in recovery tank
• Foot operated on and off switch
• One handed recovery tank removal. Fig. 5
10/97
J._ E:t
ELECTRICAL SYSTEM
TURBINE _-
BRUSIt BLOCK
Deluxe and Ultra models have 5 mlcllocking rotating
brushes. Fig. 6
Tile brushes are driven by an air pOWeled turbine
Fig. 7
Rotation of tile brush can be viewed though a cleai
cover on the hood. The Speed of the brush depends
on air flow and is adjustable for Lo or Hi rotation or
can be turned off completely as might be desired
when cleaning bare floors. Fig. 8
There are 3 major systems in Steam Vacs:
1. Electrical
2. Distribution
3. Recovery
The Electrical System - Fig. 9 consists of the
power supply cord, motor and on/off switch. Close
the switch, the motor runs and provides suction for
recovery at the floor or the upholstery tool. It also
generates air flow to drive the turbine to rotate the
brushes at the floor and in the powere d wand plus
drive the pump to force solution to the upholstery
tool.
SUN TEA VALVE
RESERVOIR
DISTRIBUTION SYSTEM
CAP
SOLUTION
,TANK
POPPET
__ MOTOR
The Distribution System - Fig. 10 When the solu-
tion tank is placed on the unit, a valve in the tank
opens and fills the reservoir and the tube leading to
the pump. With the unit turned on and the handle in
the upright position, the pump runs and sends water
to the wand for above the floor cleaning Fig. 10A
PLUNGER
/SLIDE
VALVE
MOTOR
• PUMP
_TURBINE
I0197
When the handle is lowered to tile operating positiot,
the pump shuts off and the floor brushes (5) start to
rotate (unless turned off manually) Fig. 10B
When the trigger on the handle is depressed, a solu-
tion valve in tile reservoir is opened and water flows.
to the rotating brushes.
Tile Recovery System. Recovery from tile floor is
shown in Fig. 11 With the handle in the operating
position, the pump is off and the valve to the tools
closed. All suction is at the floor nozzle.
TANK
€
RECOVERY
TANK LID
)
ROTATING
BRUSHES
MOTOR
Recovery at the upholstery tool is shown in Fig. 12.
With the handle in the storage position the pump
runs, and the valve to the floor is closed diverting all
suction to the upholstery tool.
Key components of the SteamVac Ultra are shown ir
the cut away views on the next page.
Refer to the Hoover Service Manual for repair proce
dures and the Microfiche Parts Catalog, purple head-
er for spare parts.
HOSE
MOTOR
10/97
DIRTY CLEAN
AIR - AIR
WATER
FRONT
FLOOR
VALVE
DIRTY CLEAN
AIR - AIR
WATER
PUMP
FLOOR
HANDLE
HOSE
SOIM_ON TANK
MEASURING
CI_/CAP
CLEAN
TANK
SOLI.rrION
TRIGGER
RECOVERYTANK
HANDLE
PUMP
TANK
BRUSH BLOCK
SOLUTION
CONTROL
ROD
ON/OFF PEDAL
BAREH.f)OR
TOOL
RESERVOIR
CORD
HOOK
10/97
FROM
PUMP
FROM
_-_ PUMP
10/9"/
SERVICE INSTRUCTIONS
CARPET CLEANING MACHINE
STEAMVAC
Service Support 10/97
Latch R H
Svatch Button
I
Duct
I
I
Seal
Hose
Motor Cover /
Valve Assembly
Seal
Motor
w
• Seal
Brush Bloct( Assembly
• Actuator Arm
Whee_
Switch
Pedal
Attachment
Cord
Loading...