Hoover CJ625, CJ930T User Manual

USER MANUAL

IMPORTANT SAFETY REMINDERS

IT IS IMPORTANT THAT YOU:

This cleaner should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.

Only use attachments recommended or supplied by Hoover.

WARNING: Electricity can be extremely dangerous. This appliance must be

IMPORTANT: The wires in the mains power lead are coloured in accordance with the following code: Blue – Neutral Brown – Live

STATIC ELECTRICITY. Some carpets can cause a small build up of static

electricity. Any static discharge is not hazardous to health.

AFTER USE. Switch the cleaner off and remove the plug from the electricity supply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance task.

HOOVER SERVICE. To ensure the continued sa appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer.

fe and efficient operation of this

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understan

d the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Use indoors only.

• Use only on surfaces moistened by the

cleaning process or small spills. Do not immerse product.

• Close supervision is necessary when any appliance is used by or near children. Do not allow cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• DO NOT use aerosol sprays near cleaner. Aerosol sprays may be flammable.

• Do not pick up or use flammable

or combustible materials such as gasoline or fine wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the machine.

- 2 -

IT IS IMPORTANT THAT YOU:IT IS IMPORTANT THAT YOU:

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce flow.

• Do not pull or carry by the cord, use the cord as a handle, close door on the cord or pull the cord around sharp edges or corners. Do not run appliance over the cord. Keep the cord away from heated surfaces.

• Always disconnect the cord from electrical outlet before servicing the cleaner.

• Unplug the cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on the cord. To

material with this appliance.

• When using recommended chemicals with this machine, be certain the area is well ventilated.

• Do not use a flammable or combustible liquid to clean a floor.

• Follow manufacturer’s instructions for all chemicals used with this machine. Do not exceed recommended mixing ratios.

• Store in a dry place. Do not expose the cleaner to freezing temperatures.

• Do not continue to use your cleaner if it appears to be faulty. If the power cord is damaged stop using the cleaner IMMEDIATELY. To avoid a safety hazard,

unplug, grasp the plug, not the cord.

• Never handle the plug or appliance with wet hands.

• Do not clean over floor electrical outlets.

• Do not use without the tanks in place.

• Keep detergents and other cleaners out of

children’s reach.

• Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic

an authorised Hoover service engineer must replace the power cord.

• Use the cleaner only for its intended use as described in the instructions.

- 3 -

GETTING TO KNOW YOUR CLEANER

Congratulations on the purchase of your new Hoover.

Please take the time to read this manual carefully.

You’ll then be ready to make the most of the special features only the new Hoover can offer!

When first unpacking your cleaner please check all items are included:

Cleaner body Cloth adapter plate* Cloth*

In the unlikely event that any item is missing or you experience any problems with the product

HANDLE RELEASE

CARRY HANDLE

DIRTY WATER TANK

RELEASE LEVER

DIRTY WATER TANK

HANDLE

DIRTY WATER TANK

HANDLE

BUTTON

FILLING CAP

CLEAN WATER TANK

EXHAUST FILTER CHAMBER

SOLUTION MIX TRIGGER

CORD CLIP

MEASURING JUG

FUNNEL

UPPER STORAGE HOOK

POWER CORD

LOWER STORAGE HOOK

ON/OFF PEDAL

DO NOT TAKE IT BACK TO THE SHOP

Please contact the Hoover customer helpline: Tel: 08444 995 599

Email: cust

Should any faults occur with your cleaner during the first 12 months, contact the Hoover Customer Helpline on the number above. If you are having difficulty in obtaining filters or any other accessories for your cleaner, contact the Hoover Customer helpline or order online at

www.hooverspares.com

omer.services@hoovercandy.com

HOOVER CARPET CLEANING SOLUTION

- 4 -

EXHAUST FILTER

PRE MOTOR FILTER

PLATE*

CLEANER RELEASE PEDAL

CLOTH*CLOTH ADAPTER

(*Certain models only)

PREPARING YOUR CLEANER

Remove the accessories from the

following:

Cleaner body Cloth adapter plate* Cloth*

To fold the handle press the handle

release button and fold to the storage position.

Raise the handle to the upright position

until it locks in place.

Once the handle has been lowered lift

the carry handle to allow the cleaner to be carried from room to room.

BEFORE CLEANING A CARPET

• Vacuum thoroughly.

• Test for colourfastness

• Move the furniture

Test for colourfastness - Wet a white absorbent cloth with the solution. In a small, hidden area of your carpet, gently rub the surface with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white paper towel. If your carpet has more than one colour, check all colours.

When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture is too heavy to move, place aluminium foil or wax paper under legs. This will prevent wood finishes from staining your carpet. Pin up furniture skirts and curtains.

(*Certain models only)

- 5 -

NOTE: Do not over saturate your carpet.

IMPORTANT: This cleaner should not be used to dry vacuum the carpet.

FILLING THE CLEAN WATER TANK

The clean water tank holds the water and cleaning solution.

IMPORTANT: Always turn the cleaner off and disconnect from the electrical outlet before filling the clean water tank.

IMPORTANT:When filling the clean water tank, do not exceed the max fill line.

Open the filling cap on the water tank.

Add the required amount of cleaning

(approx. 40ml per 1L of water)

Pour the solution into the clean water

Mix the solution with warm water.

(Max. temperature - 40ºC)

Close the filling cap on the water tank.

WARNING: Use only Hoover carpet cleaning solution. Using other solution brands may cause excess foaming and will prevent the cleaner from working effectively. Using other solutions may affect your warranty.

- 6 -

CLEANING CARPETS

Dry vacuum the carpet thoroughly before cleaning your carpet.

Ensure the carpet has been checked for colour fastness.

Press the cleaner release pedal and recline the cleaner.

IMPORTANT: This cleaner should not be used to dry vacuum the carpet.

cleaner into the power supply.

Press the solution mix trigger to release

the solution.

Press the ON/OFF pedal.Unwrap the power cord and plug the

For best results apply the solution on the

5 3

forward stroke (press trigger) and recover the solution on the backward stroke (release trigger).

- 7 -

CLEANING HARD FLOORS* STORAGE

CORD STORAGE

Attach the Velcro side of the cloth to the

underside of the cloth adaptor plate.

Attached the cloth adapter plate to the foot of the cleaner.

Before storing the cleaner:

Turn the cleaner off and disconnect from the electrical socket.

Empty and rinse the dirty water tank. Allow to air dry.

Press the handle release button and lower the

handle for storage.

Turn the cleaner off and remove the plug from the electrical socket. Wind the power cord around the cord storage hooks.

Rotate the storage hooks to quickly release the full length of the power cord.

CORD CLIP

Do not run over the power cord.

Use the cleaner as described in ‘Cleaning

Carpets’.

After use remove the cloth from the adapter plate

and wash the cloth pad in a washing machine with a mild detergent at maximum temperature 30°c. Do not use a fabric softener.

* Certain models only

WARNING: Use only Hoover carpet cleaning solution. Using other solutions may affect

your warranty.

Do not store the cleaner on a wood surface unless the cleaner is completely dry.

- 8 -

Clip the power cord in the cord clip at the back of the handle to avoid accidentally running the cleaner over the cord and causing any damage

EMPTYING THE DIRTY WATER TANK CLEANING THE EXAUST FILTER

WARNING: DO NOT exceed the max fill line on the dirty water tank.

Press the dirty water tank release lever.

Turn the tank cap anti-clockwise to

open.

Remove the dirty water tank from the

cleaner,

Empty the tank. Rinse the tank with

clean water and allow to dry before storing the cleaner.

release latch.

chamber.

chamber. Rinse under hand warm water to remove any debris. Allow to completely dry before returning to the cleaner

CLEANING THE PRE MOTOR FILTER

located under the dirty water tank.

Rinse under hand warm water to remove any debris. Allow to completely dry before returning to the cleaner.

WARNING: Always switch the cleaner off and unplug it from the electrical socket before emptying the dirty water tank.

IMPORTANT: Clean the filters after each use.

WARNING: Ensure both filter are fitted to the cleaner before use.

- 9 -

CLEANING THE BRUSHBAR*

Turn the cleaner upside down. Remove any threads or debris from the brush bar.

CLEANING THE AGITATOR*

Remove any threads or debris ensuring the agitator can rotate freely.

CHANGING THE BRUSHBAR*

Press the dirty water tank release

lever and remove the dirty water tank. Unscrew 4 retaining screws on the top surface.

Unscrew 2 retaining screws

3 4

located on the underside of the detergent nozzle. Remove the brushbar from the nozzle.

IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply

before dismantling cleaner

Turn the cleaner over. Remove

the brushbar alignment brackets.

Replace the brush bar and attach to the nozzle. Attach the alignment brackets and assemble to the cleaner.

THIS FEATURE VARIES ACCORDING TO MODEL

Please check your the underside of

your cleaner and follow the appropriate instructions.

* Certain models only

THIS FEATURE VARIES ACCORDING TO MODEL

Please check your the underside of your cleaner and

follow the appropriate instructions.

- 10 -

CHANGING THE AGITATOR / BELT*

IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply before dismantling cleaner.

Turn cleaner over and remove 7

retaining screws.

Remove the agitator brackets. Replace the agitator by looping the belt

Remove the belt cover and safety

bar.

round the agitator making sure it sits securely in the belt channel.

Slide the agitator assembly out

of the cleaner and check the belt for wear.

Reassemble the agitator assembly to the

cleaner ensuring the agitator can rotate freely.

THIS FEATURE VARIES ACCORDING TO MODEL

Please check your the underside of your cleaner and

follow the appropriate instructions.

* Certain models only

- 11 -

Troubleshooting

Genuine HOOVER Spares

If your cleaner is not working properly run through the followi ng checklist.

WARNING: To reduce the risk of personal injury, unplug the carpet washer before performing maintenance/troubleshooting checks.

Why won’t the carpet washer turn on?

• It may not be plugged into the electrical outlet correctly: ensure that the plug is pushed in securely and switched on.

• The power button on the unit hasn’t been fully depressed.

• If unit cuts out during use, disconnect the unit from the wall socket, allow to

cool for one hour, clean the filter and empty the dirty water tank and check hose, brushbar for blockages.

Why won’t the cleaner pick up solution/spills?

• The dirty water tank may be full and the auto shut off engaged. Empty the dirty water tank.

• Ensure the dirty water tank is fitted correctly and the tank cap is securely fitted.

• Check the brushbar for blockages.

Why won’t the solution/clean water dispense?

• The solution/clean water tank may be empty.

• Ensure dirty water tank is fitted securely.

If there is any doubt call the Hoover Customer Helpline 08444 995 599 for advice. They may be able to assist you over the telephone.

Tel. 08443 712 758 www.hooverspares.com

Always replace parts with genuine Hoover spares. When ordering parts, always quote your model number.

Hoover Customer Helpline

Should any faults occur with your cleaner during the first 12 months, contact the Hoover Customer Helpline on the number below.

Tel: 08444 995 599 Email: customer.services@hoovercandy.com

Hoover have a computerised nationwide service network of over 500 engineers who will quickly respond to your call and guarantee your repair for 12 months.

USE ONLY HOOVER SPARES

SPARE PARTS CODE

AGITATOR Y30 35601321

BELT V35 35601322

CLOTH AND ADAPTOR AC20 35601323

FIXED BRUSHBAR F4PJET 35601324

CLEANJET SOLUTION 35601351

FILTER KIT 35601352

- 12 -

Quality

BSI ISO 9001

Hoover’s factories have been independently assessed for quality . Our products are made using a quality system which meets the requirements of ISO 9001

Environment - WEEE Directive

This appliance is marked according to the European Directive 2011/65/EC on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with the local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product,

osal service or the

shop where you purchased the product.

This product complies with the European Directives 2006/95/EC, 2004/108/EC and 2011/65/EC.

HOOVER Limited Pentrebach, Merthyr Tydfil, Mid Glamorgan CF48 4TU

GUARANTEE STATEMENT

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

- 13 -

Hoover Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU, UK

HOOVER CUSTOMER HELPINE 08444 995 599

INDUSTRIAL

DESIGN

Artwork Number:

Issue:

48008882 0

Title:

user manual

Created:

Cris 2013/08/26

Modified:

Cris 2013/08/26

Engineering Approved:

Hoover Ltd. Industrial Design Department 5th Floor, 288 Dongping Street, Suzhou Industrial Park,Suzhou, PRC 215123 Tel: 0512-82181000 Ext 226

Date:

Note: Artwork not to be used unless approved by Engineering.

CJ625 - 001 - 39100357

240V ~ 50Hz

600W 5.5Kg

One model need to stick one manual label on the manual

MANUAL LABEL

Printing colour : 黑（black）

Size : 75x50mm Material: Adhesiver sticker (不干胶)

USER MANUAL

Printing colour : 黑（black）

Size : 297x210mm Material: 1.cover= 铜版纸 coated paper(120g)

2.inside pages= 双胶纸 offset paper(80g)

Hoover CJ625, CJ930T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual