Hootoo TripMate on iOS User Manual

Instruction for

ased on

HooToo TripMate

USB Storage e.g. USB Disk or E

This can be any USB storage, such as your USB Disk, your USB HDD. However, to

link up with a device via a USB cable to this USB port will NOT work at all!

power button for 3

lit on. Make sure your TripMate has enough battery to power on.

“HooToo TripMate”

ower and

on iOS

B

1. Search “HooToo TripMate”

2. Download “

3. Attach the

HooToo TripMate_V1.3.452

on Apple Store.

” and install it onto your iOS device.

xternal HDD to your TripMate

Note:

4. Press and hold
indicators are

-5 seconds until the p

Wi-Fi

5. From your iOS device, go to “ Settings” and enter the “Wi-Fi” setup page

Go to: Settings – Wi-Fi

6. Join “TripMate-XXXX” using password “11111111” (8x1s)

Default password: 11111111

[OPTIONAL] After your iOS device is connected with TripMate, you may enter the
admin setup page of TripMate via 10.10.10.254 from any of your browser, simply
put 10.10.10.254 into the URL box and hit search). Then you can continue to set up
your TripMate as a router from admin web page (10.10.10.254).

7. Run the downloaded app “HooToo TripMate”

8. You can now access the files from your USB Disk via “My TripMate”, if you tab
on the bottom right icon “My Device”, it will lead you to the file management
page of your iOS device (smartphone/tablet).

9. Tab once on “My TripMate” to access your USB storage and listen to the music

10. Or browse images

11. And watch movies!

12. And transfer files from your USB Disk to your iOS device.

Step 1: Enter the folder e.g. photos, tab on” Manage” on the top. Then press and
hold on the icons of the photo you want to transfer. There will appear a “√” on the
upper right of the file you choose. Tab on “Download” on the bottom to transfer.

Step 2: The following window pops out, tab on “Local” and choose the destination
folder (Documents, Movies, Music, Photos, etc) where you want the files to be
saved on your iOS device.

Tab on this

Choose the destination
folder

Step 3: Confirm to transfer the file to your iOS device.

Confirm the transfer

Step 4: You can check the status of file transferring (see below). In the top box is
the file listed to be transferred, in the lower box is the file that has been transferred
successfully.

Files to be transferred

Files has been transferred

Step 5: Check your files transferred from USB Disk to your iOS device.

Tab once on “Done” on the top menu to go back to “My Device” to check the
files.

These are the files
transferred from the
USB disk to your iOS
device

[Note] To transfer the files from your iOS device to your USB Disk is the same way.
Choose the files on “My Device” and download to “My TripMate”.

13. How to delete files on “My device” or “My TripMate”?

Choose the files you want to delete and confirm “OK” to “Delete”.

Press and hold on the files
to choose, and tab on
“Delete” to confirm the
delete

14. How to set up your TripMate as Bridge mode?

By doing this, your iOS device can also access to the internet!

How: Tab on “Setting” and choose the wireless to connect.

Available network will be listed
out, choose your desired SSID
and bridge your TripMate to it
wirelessly.

Now you can use it to share your photos from your USB Disk onto your Facebook or
twitter.

Any questions, please feel free to contact us at [e-mail].
Thank you very much for your support!