Hootoo IP Wireless / Wired, IP Wireless Camera Camera User Manual
1
Hootoo IP Wireless / Wired Camera
REMOTE PAN/TILT ROTATE
User Manual
Product Components and Features:
IP camera ------------------------------------------------------------------1 PC
Bracket（optional）-----------------------------------------------------1 PC
Power adapter------------------------------------------------------------ 1 PC
Warranty-Card------------------------------------------------------------------------1PC
CD--------------------------------------------------------------------------------------1PC
2
Table of CONTENTS
¾ General Introduction ............................................................................................... 3
1.1. Product Specifications ............................................................................................. 3
1.2. Applications ..................................................................................................... ..……...4
1.3. System Requirements............................................................................................... .5
¾ 2. Interface & Installation .....................................................................................5
2.1. Interface ........................................................................................................... …..….5
2.2. Installation........................................................................................................ ……...6
2.2.1. Installation in LAN. ...................................................................................... 6
2.2.2. PPPoE Installation ........................................................................................ 7
2.2.3. IP Camera & PC connection ................................................................ …….........7
¾ 3. IE Browse to IP Camera................................................................................7
3.1. Use Finder ............................................................................................................................8
3.2. Logging and Active X Installation................................................................. …….....9
3.3. Operation Button................................................................................................... 11
3.3.1. Equipment Status ........................................................................................11
3.3.2. Administrator Operation ...................................................................... ….............11
3.3.3. Operation.................................................................................................... 11
3.4. Basic Settings................................................................................................. …..........12
3.4.1. Device Information .............................................................................. …........13
3.4.2. Device Name Settings.......................................................................... …......13
3.4.3. Device Clock Settings............................................................................... 13
3.4.4. Device User Settings................................................................................. 13
3.4.5. Basic Network Settings........................................................................ …..13
3.4.6. Wireless LAN Settings............................................................................. ..14
3.4.7. ADSL Settings.......................................................................................... 14
3.4.8. UPnP Settings .........................................................................................,14
3.4.9. DDNS Settings......................................................................................... 14
3.4.10. SMTP Settings ...................................................................................... ...15
3.4.11. FTP Service Settings............................................................................. ..15
3.4.12. Alarm Service Settings ...................................................................... …16
3.4.13. Reset/Firm Ware Upgrade ................................................................. ….16
3.4.14 Restore factory Settings ...................................................................... ….17
3.4.15 Reboot Equipment .............................................................................. …1 7
¾ 4. Others ................................................................................................................ ….1 7
4.1. Port Forwarding Settings in router.................................................................... 1 7
4.2. Linkage Alarm Host....................................................................................... ….1 8
4…3
Frequently Asked Questions ............................................................................. 20
¾ 5. Warranty ............................................................................................................... 21
3
5.1. Warranty Terms ............................................................................................. ….21
5.2. Warranty Card................................................................................................... 22
General Introduction
IP Camera is a new generation product with the combination of analog camera & IP video
technology. Despite all functions which analog cameras have, IP camera can compress and encrypt
video and audio signal then send it to remote terminals through internet with its built-in processor
and web server. With its IP address, users can use standard PC IE browser to visit IP camera, real
time monitor targets, manage and store video or image, PTZ control also is available through
network.
As a new member in camera family, IP camera shares the same operation function with the
analog camera, such as, auto white balance, auto shutter speed, AGC, auto backlight
compensation etc. On the other hand, IP camera supports remote access through internet, and
support multi-user visit, some IP cameras are able to extend to both analog and digital signal.
The core of F series IP cameras is 32Bit RSIC, adopts standard MJPEG
compression format, camera sensor is CMOS, support auto white balance and backlight
balance, support IE, cell phone browser，centralized monitor interface
management. In general, according to the function of audio simplex & duplex, infrared,
wired, wireless, POE, PZT, local storage, it has hundreds of products, to meet requirements
of high, middle, low ranks of users.
1.1. Product Specifications
*- Adopt high Performance, strong function media processor 32Bit RSIC
*- High sensor CMOS
*-Adopt optimized MJPEG video compression algorithm, realize high-definition images
transmission in narrow bandwidth;
*-Maximum support 15 users viewing at the same time, no limit for users if using Forwarder
Server function;
*- Built in Web Server，it is convenient for users to use standard browse to realize the
real time monitoring and setting administration;
*-Support WIFI：802．11b/g wireless networking;
*-Support remote system update;
*-Support DDNS analysis, support LAN & Internet (ADSL、Cable Modem)
*-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS, DNS
Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*-Parts of modes products support one/ two way audio talkback;
*-Support Motion Detection alarm function (set area & sensitivity);
*-Support image snap
*-Abnormal automatic recovery function，if Network Interruption can auto connection
*-Dynamic alarm function, set alarm period
4
Parameters Form
Image Compression Format Standard M-JPEG
Sensor CMOS，300,000 pixel
Image Resolution Rate VGA（640x480）/QVGA（320x240）
Network interface RJ-45/10-100 Base T ，802.11b/g
Network protocol TCP/IP,FTP,SMTP,HTTP,UDP,DHCP,NTP,DDNS,UPNP,D
NS,PPPOE
Image Max Transmission Rate
30 frame/second（QVGA）, 15 frame/second（VGA）
Alert control
Output：1 router（5VDC，0.1A）； input：1 router（closure Trigger）
Motion Detection Support
Software Update Users automatically upgrade
Monitor Mode IE browse or special program
Playback Mode Microsoft Media Player
Security 3rd ranks password authority setting
Minimum illumination
2.0Lux@550nm
Auto White Balance Support
Working environment -10C°– 50C°，20% - 80%PH
1.2. Applications
The series products usually are ideal for big department, supermarket, home, factory, workshop etc.
5
1.3. System Requirements
Minimum Hardware Configuration
CPU: Pentium 1.6 GHz
Memory: 256MB
Audio card: need audio monitor, two way talkback essential
Hard Disk : if it need video image，no less favorable than 40G
Operation System: 32 bit simple/ English Windows2000、WindowsXP、 Windows2003、
Windows Vista & 64 bit simple Chinese/English Windows2003、 Windows XP、Windows Vista
etc.
Software environment IE 5.0 or above
version DirectX8.0 or above version
TCP／IP network protocol
2. Interface & Installation
There are two kinds of F series IP camera interfaces: one is body guard interface, the other is the
extend line interface, set two representative products as examples, to give explanation:
Non-extended line IP Camera icon Extended line IP Camera icon
2.1. Interface
Non-extended line IP Camera Tailgate
6
Power Supply Light: constant on after power up
Network light: constant sparkle after power up data transmission. Ethernet
interface: RJ-45 interface.
I/O interface: 1 router alarm input, accept 3, 4 two terminals (input terminal grounding, low level
effective trigger); 1 router TTL control input, connect 1,2 two terminals (1,2
terminals short connections).
Power input interface: connect direct current 5V Power
Extension line interface definition icon:
Power: direct current 12V.
GPIO alarm interface: accept external connection linkage alarm equipment (for
example: door magnet, infrared)
Reset line: two reset line short circuit, equipments restore to ex- factory standards. Ethernet
interface: RJ-45 network interface.
Backup: follow-up product extend interface.
About GPIO alarm interface (S terminal) definition:
1# +DC12V
2# RS485（A）
3# Earth（GND）
4# IO2 （OUT PUT）
5# RS485 （B）
6# IO1 （IN PUT）
GND: Ground，alarm input ground ，RS485
ground
RS485:RS485 control interface，left
connection RS485 negative right connection RS485 positive. connect P/T decoder，
support variety P/T protocol.
2.2. Installation
IP camera process image transmission on network through the use of Internet Technology, it
offers DDNS function for static IP, dynamic IP, PPPoE dialing users. IP Camera can connect to
outer net through LAN, also connect directly.
3 networking connecting ways are widely applied in IP Camera:
2.2.1. Installation in LAN.
This is the most popular network access way, as long as there is a router, internet cable connect
router directly to IP Camera, IP Camera can connect to Internet as normal PC, as shows:
7
2.2.2. PPPoE Installation
Under the condition, users need set PPPoE dialing parameter on IP Camera: input the
username and password ISP supplier’ offer permit IP Camera dialing connects to Internet. As to
set the PPPoE dialing parameter, you can connect device to network through the first way, then
write parameter to the device, also through following third way, direct process parameter written
to device. The way how to set PPPoE, please refer to 3.4.5.for detailed steps
2.2.3. IP Camera & PC connection
This method is not used too often, when you process machine write parameter or program
shift, we recommend you adopt the first connect network way, to process the modification of
machine parameter.
connect to IP camera (note: don’t apply for wrong power), after one
Loading...