Hooker Furniture EC403095, EC4030STC Assembly Guide

Seven Seas Style:EC403 Assembly Instructions

efully remove the 5 STAR BASE(B) from the carton. The base is

G

Carefully unpack all parts and identify them with parts list before
attempting to assemble the chair.

IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.

1. Car
located behind the fiberboard that is behind the chair UNIT
SEATING(G).

2. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).

3. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B).

4. Attach MECHANISM (F) to the BODY SEATER (G) by SCREWS (D)

with FLAT WASHERS (E).

5. Insert the gas lift into the pre-assembled BODY SEATER to finish the

final assembly.

6. Be sure that all the screws are fully tightened before using.

Parts List

A. CASTERS 5
B. 5 STAR BASE 1
C. GAS LIFT 1
D. SCREWS (5/16”X1½” )
E. FLAT WASHERS 5
F. MECHANISM 1
G. BODY SEATER
H. ALLEN KEY

5

1
2