Hooker Furniture EC387099 Assembly Guide

Style No.: EC387 Assembly Instructions

Carefully unpack all parts and identify them with parts list before attempting to assemble the chair.

IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL YOU HAVE COMPLETED THE FINAL ASSEMBLY.

1. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).

2. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B), and

put the BELLOWS(D) onto the GAS LIFT(C).

3. Attach SEAT PLATE (F) to the Unit Seating(G) by using 4 SCREWS (E) with 4 FLAT WASHERS (E1).

4. Insert the pre-assembled seat unit onto the gas lift to finish the final assembly.

5. Be sure that all the screws are fully tightened before using.

Parts List

A. CASTERS 5 B. 5 STAR BASE 1 C. GAS LIFT 1 D. BELLOWS 1 E. SCREWS (5/16”x1-1/4”) E1. FLAT WASHERS F. SEAT PLATE 1 G. UNIT SEATING H. ALLEN KEY

4 4

1 1

Specifications and Main Features