Page 1
Seven Seas Style:EC362 Assembly Instruct i o ns
Carefully unpack all parts and identify them with parts list before
Attach SEAT PLATE (F) to the Unit Seating(G) by using 4 SCREWS
A. CASTERS
5
B. 5 STAR BASE
1
C. GAS LIFT
1
D. SCREWS (5/16”X1½” )
5
E. FLATWASHERS
5
F. SEAT PLATE
1
G. UNIT SEATING
1
H. ALLEN KEY
2
G
B
A
attempting to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).
2. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B).
3.
(D) with 4 FLAT WASHERS (E).
4. Insert the gas lift into the pre-assembled seat unit to finish the final
assembly.
5. Be sure that all the screws are fully tightened before using.
Parts List
Loading...