Hooker Furniture 88485122 Assembly Guide
ASSEMBLY INSTRUCTION
Assembly Steps
for the feet
:( The feet are
placed in the
bottom drawer)
ITEM # 884-85-122
MIRRORED THREE DRAWER CHEST
***
Caution: Please read all instructions carefully before starting the assembly process.
A
B
C
D
1. Removed the bottom drawer and lay down the chest on a soft surface.
2. Align the hole on the bottom panel and foot (E), then insert 1 flat washer(D),1 lock
washer(C), 1 bolt(B), to the hole from the bottom panel to the foot (E), tighten the bolt with
Allen Wrench (A).
3. Attach the other three feet in the same way as Step 2.
4. Turn the chest upright and put the drawer back, make sure all bolts are tightened.
1PC
4PCS
4PCS
4PCS
E
Knobs assembly instruction:
1.
When you receive this case it will have the knobs installed inside of the drawers, please
unscrew the screws and remove the knobs from the inside of the drawers.
2.
Replace knobs at front and tighten up. Please do not over tighten.
Please note there is a 1/8” gap between the knob and mirror on the drawer front to prevent
the mirror from breakage.
Drawer front Drawer front
Drawer front
Drawer front
There is a 1/8” gap between the
knob and mirror on the drawer front
There is a little gap betwwen
the knob and drawer front
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.
Loading...