Hooker Furniture 63885287DKW Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 638-85287-DKW Connelly Hall Console

*** Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more people

Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth.

Polish the finish with soft cloth and an industry recognized furniture polish.

1. Place console top (E) upside down on a soft

surface to prevent it from being scratched. (See

diagram 1)

2. Align holes on metal leg (F) to holes on top.

Secure metal leg to top by using lock washers (B),

flat washers (A) and bolts (C), tighten with allen

wrench (D) in clockwise direction.

Caution: Do not over tighten.

Instruction Note (For Adjustable Leveler)

1. The adjustable levelers are packed in hardware

bag. If you find this console is not horizontal,

please insert the levelers to the underneath of left,

center and right legs, then adjust levelers under

the legs accordingly to make sure this console to

be upright and horizontal. (See Diagram 2)

2. When moving furniture, please lift instead of

towing to avoid scratching floor.

Diagram 1

Diagram 2