Hooker Furniture 58057590685, 58057590699 Assembly Guide

Diagram 1
Diagram 2
ALLEMBLY INSTRUCTION
(for connecting the wire of the light on this cabinet)
Item# 5805-75906-85 Display Cabinet -Natural
5805-75906-99 Display Cabinet - Black
*** Caution: Please read all instructions carefully before starting the assembly process.
1/2
Assembly Steps:
Diagram 3
1. When each piece of cabinet is used alone, attach male connector of the power switch (A) to a wall plug. (See Diagram 1)
2. Touch dimmer is at the inside of right post.
3. If you want to bunch two or more cabinets together, place them all side by side in a desired location.
4. Leave male connector of the can light (C) and female connector of power switch (B) for the first cabinet (#1) as it is. Keep male connector of the can light (C) and female connector of power switch (B) off for the rest cabinets (#2, #3, and so on). (See Diagram 2)
5. Connect female connector of the can light (D) (#1 cabinet) with male connector of power wire (E), then have female connector of power wire (F) connected to male connector of the can light (C) (the #2 cabinet). (See Diagram 3)
Cleaning instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.
6. Repeat step 5 for the 3rd cabinet and the rest of ones when more than two are bunched together till each one is connected.
7. Plug in male connector of power switch (A) (#1 cabinet).
8. Touch the dimmer of the #1 cabinet, all can lights connecting together will be on at the same time.
2/2
Loading...