Hooker Furniture 58051045885 Assembly Guide

Diagram 2

Diagram 1

Diagram 3

ASSEMBLY INSTRUCTION

Item#: 5805-10458-85 Writing Desk

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two persons.

1/2

Assembly Steps:

1. Put desk table (Q) upside down on a soft surface to prevent it from being scratched (See
Diagram 1).

2. Place top stretcher (H) onto center rail of the top to make sure all pre-drilled holes are in

alignment, well insert bolts (A), lock washers (B) and flat washers (C), tighten bolts by
turning with allen wrench (D) in clockwise direction (See Diagram 1).

3. Place left leg frame (J) and right leg frame (K) onto mounting bridge of the top to make sure

all pre-drilled holes are in alignment, well insert bolts (F), lock washers (B) and flat
washers (C), tighten bolts by turning with allen wrench (D) in clockwise direction (See

Diagram 2).

4. Attach the ends of leg frames (J&K) to top stretcher (H) by using bolts (E), lock washers (B)
and flat washers (G) to secure all by turning with allen wrench (D) (See Diagram 3).

5. Well with one hand holding center stretcher (O) to leg frames (J&K) to make sure all

pre-drilled holes are in alignment,insert bolts (E), lock washers (B) and flat washers (G),

secure by turning with allen wrench(D) (See Diagram 3).

6. Repeat step 5 for bottom stretcher (P)

7. Turn desk upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

2/2