Hooker Furniture 575090150MWD, 575090166MWD, 575090160MWD Assembly Guide

1/3

A

SSEMBLY INSTRUCTIO N

ITEM# 5750-90151 -MWD De-Constructed 5/0 Panel Headboard

5750-90152 -MWD De-Constructed 5/0 Panel Footboard
5750-90167-MWD De-Constructed 6/0 & 6/6 Panel Headboard
5750-90168 -MWD De-Constructed 6/0 & 6/6 Panel Footboard
5750-90153-MWD 5/0 & 6/6 Rails
5750-90163-MWD 6/0 Rails

Caution: Please make sure you have all parts indicated below prior to assembly.
This bed is heavy and can best be assembled with the help of two or more people.

Diagram 2

Diagram 1

Diagram 5

Diagram 3

2/3

Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.

Assembly steps:

1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the
ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten
nuts (E) securely with spanner wrench (F). (See diagram 1)

Diagram 1

2. Take out center supports (L) from the rail box, attach center supports (L) to slats (D) by using 2
bolts (Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R).
(See diagram 2)

Diagram 2

3. Attach slats (D) to side rails (C), and tighten screws(K) on both ends of slats(D) to side rails(C).
(See diagram 3)

Diagram 3