Hooker Furniture 575090002MWD, 575090008GRY Assembly Guide

ASSEMBLY INSTRUCTION

Diagram 1

ITEM# 5750-90008-GRY Linen Wrapped Mirror

# 5750-90002-MWD Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people

Assembly steps :

1. Place mirror (A) on top of dresser(B). Be sure to position the mirror in the middle of top. The
back bottom edge of the mirror and the back edge of the top should be flushed.

2. Attach a mending plate (C) at back of mirr or and back of dresser. Al ign holes on mending plate
to the pre-drilled holes at the back of dresser and tighten 3 pcs of screws (D). Tighten another
6 screws at ra ndo m l oc at ion through mendi ng pl ate to mirror fra me with care. (See Diagram 1)

3. Repeat step 2 for another mending plate (C).

Caution: Do not over tighten.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recogni zed furn itur e poli sh.