Hooker Furniture 575075203SLV, 575075213SLV Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5750-75203T-SLV 48in Zinc Round Dining Tab le Top

5750-75213T-SLV 60in Zinc Round Dining Table Top
5750-75203B-MWD Round Dining Table Base

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1

Note:

1. Mounting bridge cannot be assembled upside down. Please follw numbers on mounting
bridge and top of base with locator dowels when assemble.

2. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

Assembly steps with extension block:

1. Place table top (H) upside down on a smooth surface to prevent it from being scratched.

2. Attach base (F) to top (H) by using bolts (C), lock washers (B) and flat washers (A), secure

with allen wrench (D) in clockwise direction. (See diagram 2)

3. Turn table uprig ht.

1/2

Diagram 1 Diagram 2

Diagram 3 Diagram 4

Assembly steps without e x t ensi on block:

1. Unscrew bolts (C), lock washers (B) and flat washers (A) from mounting bridge (G).

2. Unscrew bolts (E), lock washers (B) and flat washers (A) from extension block (K).

3. Remove extension block (K) from base (F) with care.

4. Put mounting bridge (G) back on top of base (F) and screw bolts (C), lock washers (B) and
flat washers (A) from mounting bridge (G) to base (F).

5. Place table top (H) upside down on a smooth surface to prevent it from being scratched.

6. Attach base (F) to top (H) by using bolts (C), lock washers (B) and flat washers (A), secure

with allen wrench (D) in clockwi se dir ecti on. ( See di ag r am 3)

7. Turn table upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

2/2