Hooker Furniture 560390008LTBR Assembly Guide

ASSEMBLY INSTRUCTIONS

Item#: 5603-90008-LTBR Shaped Mirror

Item#: 5603-90002-LTBR Six-Drawer Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

DIAGRAM 1
Assembly steps:

1. Place the mirror on top of the dresser. Be sure to position the mirror in the middle of the top.
There should be some space between the back bottom edge of the mirror and the back edge of
the top.

2. Insert 2pcs of wood dowels(B) into pre-drilled holes on the back of mirror frame, and align
holes in mending plate with wood dowels on the back of mirror.(See diagram 1).

3. Align holes on mending plate to pre-drilled holes at the back of dresser, use screws
(A) to tighten mending plate on the back of dresser and mirror.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.