Hooker Furniture 560375200LTBR Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5603-75003-LTBR Rectangle Dining Table Base

5603-75004-LTBR Rectangle Dining Top w/2-20in leaves

** Please make sure you have all parts indicated below prior to assembly.

This top is heavy and can best be assembled with the help of two or more persons.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 2

Assembly Steps:

1. Place table top upside down on a soft
surface to prevent it from scratching.

2. Screw the table top and bases by

using bolts (C), lock washers (B) and
flat washers (A) tightly with allen
wrench (D) in clockwise direction.
(See Diagram 1)

Instruction for table leaves:

1. There are latches at the bottom of
table top, turn off the latch as shown
in diagram 1.

2. Pull out table top as the arrow
direction shown in diagram 2

3. Place table leaves between and push
table tops together. Then turn on
latches.

4. Take opposite action to remove table
leaves.

Diagram 1