Hooker Furniture 541390850 Assembly Guide

1/3

ASSEMBLY INSTRUCTION

ITEM#

Caution: Please make sure you have all parts indicated below prior to assembly.

This bed is heavy and can best be assembled with the help of two or more persons.

5413-90851 5/0

Upholstered Headboard

5413-90852 5/0

Upholstered Footboard

5413-90869 5/0-6/6

Upholstered Rails

See Diagram 1

See Diagram 2
See Diagram 5

See Diagram 3

2/3

Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.

Assembly steps:

1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the end

of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E)

securely with spanner wrench (F). (See diagram 1)

Diagram 1

2. Take out center supports (L) from the rail box, attach center supports (L) to slats by using 2 bolts

(Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See

diagram 2)

Diagram 2

3 Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail

(C), using screws (K) to tighten both. (See diagram 3)

Diagram 3