Hooker Furniture 540275203 Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5402-75001 Round Dining Table Base

5402-75002 48in Round Aluminum Dining Table Top

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more persons.

Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth.
Polish the finish with soft cloth and an industry recognized furniture polish

Assembly Steps:

1. Attach mounting bridge (G) to center post (H)
using flat washers (D), lock washers (C) and
bolts (B). Tighten all bolts with allen wrench (A)
in a clockwise direction. (See diagram 1)

2. Place table top (K) upside down on a soft
surface to prevent it from scratching.

3. Attach mounting bridge (G) to table top using
flat washers (D), lock washers (C) and bolts (B).
Tighten all bolts with allen wrench (A) in a
clockwise direction. (See diagram 2)

4. Align dowels on center post (H) to holes on
bottom panel (K), attach bottom panel (K) to
center post (H) using flat washers (D), lock
washers (C) and bolts (E). Tighten all bolts with
allen wrench (A) in a clockwise direction. (See
diagram 3)

5. Turn table upright.

Diagram 1

Diagram 2

Diagram 3