Hooker Furniture 540175206 Assembly Guide

ASSEMBLY INSTRUCTION

Diagram 1

Assembly Steps:

1. Place table top upside down on a soft surface
to prevent it from being scratched.

2. Attach pedestals to top, using bolts (B), lock
washers (C), flat washers (D), secure by
turning with allen wrench (A) in a clockwise
direction. (See diagram 1).

3. Place stretcher on pedestals, using bolts (E),
lock washers (C), flat washers (D), secure by
turning with allen wrench (A) in a clockwise
direction tightly. (See diagram 2).

4. Turn table upright.

Instruction for table leaves:

1. There are latches at the bottom of table top,

turn off the latch as shown in diagram 1.

2. Pull out table top as the arrow direction

shown in diagram 3.

3. Place table leaves between and push table

tops together, then turn on latches.

4. Take opposite actions to remove table

leaves.

Diagram 2

Diagram 3

Item#: 5401-75007 Rectangle Trestle Dining Table Base

5401-75008 92in Rectangle Trestle Table Top w/2-20in leaves

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more persons.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.