Hooker Furniture 510780113 Assembly Guide

ASSEMBLY INSTRUCTION

Diagram 2

Diagram 3

Diagram 1

Diagram 4

Item#: 5107-80113 End Table

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

1. Place table top upside down on a soft surface to prevent from scratching.

2. There are 8 pcs of posts (H) with same specification and profile. Please screw bolts (A) into

3. Then tighten up 4 upper posts (H) into table top (J) in clockwise direction tightly. (See diagram

the thinner end of 4 upper posts, then screw bolts (B) into the thinner end of 4 remaining
bottom posts. (See diagram 1).

2).

1/2

4. Place shelf (I, 3/4” T) on upper posts (H), then tighten up remaining 4 bottom posts (H)
through the shelf (I) into upper post (H) in clockwise direction.( See diagram 3)

5. Assemble bottom panel(G, 1 1/4” T) and bun feet (F) to upper posts(H) by using bolts (E) and
allen wrench (D) turning in clockwise direction tightly. ( See diagram 3)

6. Turn the end table upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

2/2