Hooker Furniture 507090566AGRY Assembly Guide

1/3

ASSEMBLY INSTRUCTION

ITEM# 5070-90567A-GRY 6/6-6/0 Tufted Headboard

5070-90568A-GRY 6/6-6/0 Tufted Footboard
5070-90569 6/6 Tufted Rails (C)
5070-90563 6/0 Tufted Rails (C)

Caution: Please make sure you have all parts indicated below prior to assembly.

This bed is heavy and can best be assembled with the help of two or more people.

Diagram 1

Diagram 2

Diagram 3

Diagram 5

2/3

Assembly steps:

1. Insert 2 bolts (H) into holes of each post on Headboard (A) and Footboard (B), attach the ends of

side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E)

securely with spanner wrench (F). (See Diagram 1)

Note: Please make sure the ends of side rails with rails must be placed on top when assembling 6/0

upholstered rails. (See Diagram 6)

2. Take out center supports (L) from the rail box. Attach center supports (L) to slats (D) by using 2 bolts

(Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See

Diagram 2)

3. Attach slats (D) to side rails (C), align pre-drilled holes on the slats to holes on the cleats of side

rails(C), using screws (K) to tighten both. (See diagram 3)

Diagram 1

Diagram 2

Diagram 3

Diagram 6