Hooker Furniture 507075207 Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5070-75007 Rectangle Dining Table Base

5070-75008 Rectangle Dining Table Top

***Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people.

Diagram 1

1. Place the top upside down on a soft surface;

2. Attach thepedestal to the top, align holes on the
pedestal and the top ,insert bolt (B),lock washer
(C) and flat washer (D) into each hole;

3. Secure the bolt (B) in clockwise direction with
allen wrench (A) (see diagram 1);

4. Attach the other pedestal in the same way as
step 2 and step 3;

5. Place the rail onto two pedestals;

6. Insert 2pcs bolts (E) with lock washers (C) and
flat washers (D) into holes on rail of each side and
corresponding holes in pedestal;

7. Secure the bolts (E) with allen wrench (A);

8. Turn the table upright.

Diagram 2

1/2

DIAGRAM

3

Instruction for the leav

es:

Diagram 3

Diagram 4

1. There is a latch on the bottom of the top, turn on the latch as the diagram 3 shows.

2. Pull out the table top as the arrow direction shown in diagram 4.

3. Place the leaves on it and push them together.

4. Turn off the latch. (see diagram 3)

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and
water solution. Polish the finish with soft cloth and an industry recognized furniture polish.

2/2