Hooker Furniture 502950001 Assembly Guide
ASSEMBLY INSTRUCTION
Item#:5029-50001 RECTANGLE COCKTAIL TABLE
** Please make sure you have all parts indicated below prior to assembly.
G
NO.
A
B
C
D
E
F
G
K
F
E
C
A
HARDWARE LIST
ALLEN WRENCH
35mm BOLT
LOCK WASHER
22mm FLAT WASHER
70mm BOLT
16mm FLAT WASHER
CAP
K
J
Q'TY
1
6
8
6
2
2
2
F
C
E
A
G
A
B
C
D
K
H H
Diagram 2
Diagram 1
K
M
A
B
C
D
HH
1/2
Assembly Steps:
1. Place table top upside down on a soft surface to prevent from scratching top.
2. Attach two ends of stretcher (J) to “X” base (K) using bolt (E), lock washer (C), flat washer (F), secure
by turning with allen wrench (A) in a clockwise direction. Insert cap (G) to cover the hole. (See diagram
1).
3. Align dowels on “X” base (K) to holes pre-drilled on rails under tabletop (M), attach “X” base to table top
using bolt (B), lock washer (C), flat washer (D), secure by turning with allen wrench (A) in a clockwise
direction. (See diagram 2).
4. Turn the table upright.
Caution: Do not over tighten.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution. Polish the
finish with soft cloth and an industry recognized furniture polish.
2/2
Loading...