Hooker Furniture 50050574 Assembly Guide

ASSEMBLY INSTRUCTION

ITEM#500-50-574 HALL CHEST

***Caution: Please read all instructions carefully before starting the assembly process. The chest

is very narrow, to prevent from tipping, you can hang the chest again the wall if needed.

Assembly Steps:

1. Pull the chest against the wall in the
position you want, mark the location
of the hooks on the wall.

2. Drill two holes into the wall using
1/4”drill bit and insert the Plastic
Anchors(B).

3. Screw the Hook(A) into the Plastic
Anchor(B) . Check and make sure
the Plastic Anchor(B) is securely
held in the wall.

3. Hang the metal rings on to the

Hook(A).

Above hardware is packed in the plastic bag with this instruction sheet hanging
on the door pull.

Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.