Hooker Furniture 500485001 Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5004-85001 DROP LEAF TABLE

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

Diagram 1

Diagram 2

Assembly Steps:

1. Place table top upside down on a soft surface to prevent from scratching top.

2. Attach four posts to the bottom of the table by turning them in a clockwise direction.

3. Put bottom panel on the topof four posts, attach four bun feet through bottom panel, by turning
them in a clockwise direction. (see diagram 1)

4. Turn table upright with care, lift up the drop down leaf on each side and pull out the support lid

under it for supporting. (see diagram 2)

Caution: Do not over tighten.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.