Hooker Furniture 301450003 Assembly Guide

ASSEMBLY INSTRUCTION

Item#:3014-50003 One-Drawer Round Lamp Table-Visage

** Please make sure you have all parts indicated below prior to assembly.

Diagram1 Diagram2

Diagram3 Diagram4

Assembly Steps:

1. Attach metal plate(I) to the posts(L) using bolts (E), lock washers (F), flat washers (G), secure
all bolts with allen wrench (H) in a clockwise direction (See Diagram 1).

2. Remove the drawer and place table top upside down on a soft surface to prevent from
scratching top.

3. Attach left and right posts(L) to the top(M) using bolts (C), lock washers (B), flat washers (A),
secure all with allen wrench (D) in a clockwise direction (See Diagram 2).

4. Attach bottom panel(N) to the posts(L) through metal plate(I) using bolts (E), lock washers (F),
flat washers (G), secure all with allen wrench (H) in a clockwise direction (See Diagram 3), then
attach the center post(L) to the top according to step 3.

5. Turn the table upright and put the shelf (O) into the table, insert shelf pins(K) into posts and
secure shelf pins(K) to the shelf with screws(J) (see Diagram 4).

6. Put the drawer back.

Cleaning Instruction: Clean finishedparts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.