Hooker Furniture 165490260DKW1, 165490266DKW1 Assembly Guide
ASSEMBLY INSTRUCTION
ITEM#1654-90267-DKW1 6/0-6/6 Panel Headboard
1654-90268-DKW1 6/0-6/6 Panel Footboard
1654-90263-DKW1 6/0 Rails
1654-90253-DKW1 5/0-6/6 Rails
Caution: Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more persons.
NO.
E
F
C
A
EF
G
H
Diagram 1
1/3
G
H
K
R
Q
V
U
M
HARDWARE LIST
NUT
SPANNER WRENCH
CURVERD WASHER
FULL THREADED BOLT
SCREW
4mm ALLEN WRENCH
BOLT
LOCK WASHER
FLAT WASHER
5mm ALLEN WRENCH
Q'TY
8
1
8
8
20
1
10
10
10
1
Assembly steps:
1. Insert 2 bolts (H) into holes of each posts on Headboard (A) and Footboard (B). Attach end of side
rails (C) to the bolts (H) on posts using 2 curved washers (G) and 2 nuts (E). Tighten nuts (E)
securely with spanner wrench (F). (See diagram 1)
Note: Please make sure the end of side rail with rail must be placed on top when assembling 6/0
upholstered rails.
R
Q
V
D
U
L
Diagram 2
2. Take out center supports (L) from rail box. Attach center supports (L) to slats using 2 bolts (Q), 2 lock
washers (V) and 2 flat washers (U). Secure the bolts (Q) by using allen wrench (R). (See diagram 2)
k
C
Diagram 3
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail
(C), using screws (K) to tighten both. (See diagram 3)
2/3
D
Loading...