Hooker Furniture 162090350LTBR Assembly Guide

1/4

ASSEMBLY INSTRUCTI ON

ITEM# 1620-90351-LTBR 5/0 Panel Headboard

1620-90352-LTBR 5/0 Panel Footboard
1620-90353-LTBR 5/0-6/6 Panel Rails

Caution: Please make sure you have all parts indicated below prior to assembly.
This bed is heavy and can best be assembled with the help of two or more people.

Assembly instruction for Headboard（A） :

Please note the height of the HB is adjustable. It can be adjusted to either 59” or 67” high.

1. Place the headboard panel face down on a soft surface to prevent it from scratching.

2. If you desire the overall height to be 59”H, stick the bottom headboard post (Y) into the headboard
panel(X) to the very end and measure the open space from bottom of post to bottom of headboard
panel to be 17” high. Then, align holes at back between each other and secure by using bolts(S),
lock washers (O), flat washers (J) and tighten them securely with Allen Wrench (M).
see DIAGRAM 1

3. If you want 67”H, please adjust the bottom post (Y) and m ake sure the open space to be 25”high.
Repeat the steps of securing bolts as above . see DIAGRAM 2.

2/4

Diagram 3

Diagram 4

Diagram 5

Diagram 6

Assembly instruction for whole bed :