Hooker Furniture 162075800LTBR Assembly Guide

ASSEMBLY INSTRUCTION

Diagram2

Diagram 1

E

Item#:1620-75800-LTBR Low Windsor Arm Chair

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair
during assembly.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

1. Lay seat top down on a clean surface.

2. Attach “X” metal stretcher to both left & right side leg frames and screw (E) tightly. (see diagram1)

3. Attach both left side leg frame and right side leg frame to seat top by using bolt (B), lock washer (C)

and flat washer (D). (see diagram 2)

4. After all bolts are attached and hand tightened, turn the chair upright.

5. Make sure the chair is level and then tighten all bolts completely by using allen wrench (A).