Hooker Furniture 161875207DKW Assembly Guide

ASSEMBLY INSTRUCTION

Assembly Steps：

Diagram1

Diagram2

Item#: 1618-75007-DKW Trestle Dining Table Base

1618-75008-DKW Trestle Dining Table Top

** Please make sure you have all parts indicated below prior to assembly.

1. Put table top (M) upside
down on a soft place to
prevent it from being
scratched.

2. Attach center leg (N) to table
top (M) as labeled by using
bolt (E), lock washer (C) and
flat washer (D). Tighten them
securely with allen wrench
(A). (See diagram 1)

3. Attach base leg (O) to tabl e
top (M)by using bolt (B), lock
washer (C) and flat washer
(D). Tighten them securely
with allen wrench (A). (See
diagram 2)

4. Insert the stretcher（P）into

Diagram3

agram4

Diagram5&6

O

Di

center hole of table base leg
(O) fix it by using bolt (B), lock
washer (C) and flat washer
(D). Tighten them securely
with allen wrench (A). (See
diagram 3)

5. Repeat step 4 to install
another side stretcher(p) into
table legs. Tighten them on
stretcher(P) left side securely
with threaded rod(F),lock
washer(K),flat washer(L) and
rubber gasket(J).Securely
them on the stretcher (P) right
side with leveler wrench (H),
nut (I), flat washer (L) and
rubber gasket (J). Securely
them on center leg with
leveler wrench (H),bolt
(G) ,lock washer(K),flat
washer(L) and rubber gasket
（J）. (See diagram 4)

6. Turn the table top upright. If
you want to place the leaf on
the table, please turn the
switch to “off” position
underneath top panel. Then
pull out two ends of top panel,
place it on top and push them
together, turn the swi tch to
“ON” position.
(See diagram 5&6).

7. When you adjust the table
top, please be sure to
unstrengthen bolt (G) on
center leg first.