Hooker Furniture 161090266WH Assembly Guide

1/3

ASSEMBLY INSTRUCTION

ITEM# 1610-90267-WH 6/0-6/6 Upholstered Panel Headboard

1610-90268-WH 6/0-6/6 Panel Footboard
1610-90253-WH 6/6 Rails
1610-90263-WH 6/0 Panel Rails

Caution: Please make sure you have all parts indicated below prior to assembly.

This bed is heavy and can best be assembled with the help of two or more people.

Diagram 1

Diagram 2

Diagram 3

Diagram 5

2/3

Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.

Assembly steps:

1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the

ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten

nuts (E) securely with spanner wrench (F). (See diagram 1)

Diagram 1

2. Take out center supports (L) from the rail box, attach center supports (L) to slats (D) by using 2

bolts (Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R).

(See diagram 2)

Diagram 2

3. Attach slats (D) to side rails (C), align pre-drilled holes on the slats to holes on the cleats of side

rails (C), using screws (K) to tighten both. (See diagram 3)

Diagram 3