Hooker Furniture 161090150EGLO, 161090160EGLO, 161090166EGLO Assembly Guide
1/3
ASSEMBLY INSTRUCTION
ITEM#1610-90151-EGLO 5/0 Mirrored Panel Headboard
1610-90152-EGLO 5/0 Mirrored Panel Footboard
1610-90167-EGLO 6/0-6/6 Mirrored Panel Headboard
1610-90168-EGLO 6/0-6/6 Mirrored Panel Footboard
1610-90153-EGLO 5/0-6/6 Rails
1610-90163-EGLO 6/0 Rails
Caution: Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more persons.
Diagram 2
Diagram 5
Diagram 1
Diagram 3
2/3
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.
Assembly steps:
1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the end of
side rails (C) to bolts (H) on posts using 2 curved washers (G)and 2 nuts (E), tighten nuts (E) securely
with spanner wrench (F). (See diagram 1)
Diagram 1
2. Take out center supports (L) from the rail box, attach center supports (L) to slats using 2 bolts (Q),
2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See
diagram 2)
D
L
R
Q
V
U
Diagram 2
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail
(C), using screws (K) to tighten both. (See diagram 3)
D
k
C
Loading...