Hooker Furniture 161090002WH, 161090011EGLO Assembly Guide

ASSEMBLY INSTRUCTION

ITEM# 1610-90008-GRY Landscape Mirror

ITEM# 1610-90011-EGLO Ten-Drawer Bureau

ITEM# 1610-90002-GRY Ten-Drawer Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people

Assembly steps:

This mirror can be assembled with bureau 1610-90011-EGLO and dresser 1610-90002-GRY.
Same assemble way is as below.

1. Place mirror on top of dresser. Be sure to position the mirror in the middle of top. The back
bottom edge of the mirror and the back edge of the top should be flushed.

2. Attach a mending plate (E) at back of mirror and back of dresser. Align holes on mending plate
to the pre-drilled holes at the back of dresser and tighten 3 pcs of screws (F). Tighten another
6 screws at random location through mending plate to mirror frame with care. (See Diagram 1)

3. Repeat step 2 for another mending plate (E).

Caution: Do not over tighten.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 1

1610-90011-EGLO

1610-90002-GRY