Hooker Furniture 159590166AWH, 159590160AWH, 159590150AWH Assembly Guide

1/3

ASSEMBLY INSTRUCTION

ITEM# 1595-90151A-WH 5/0 Panel Headboard

1595-90152A-WH 5/0 Panel Footboard

1595-90167A-WH 6/0-6/6 Panel Headboard
1595-90168A-WH 6/0-6/6 Panel Footboard
1595-90153A-WH 5/0-6/6 Rails
1595-90163A-WH 6/0 Panel Rails

Caution: Please make sure you have all parts indicated below prior to assembly.

This bed is heavy and can best be assembled with the help of two or more people.

Diagram 3

Diagram 5

Diagram 1

Diagram 2

Diagram 6

2/3

Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.

Assembly steps:

1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the

ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten

nuts (E) securely with spanner wrench (F). (See Diagram 1)

2. Take out center supports (L) from rail box, attach center supports (L) to slats (D) by using 2 bolts

(Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See

Diagram 2)

3. Attach slats (D) to side rails (C), align pre-drilled holes on the slats to holes on the cleats of side

rails (C), using screws (K) to tighten both. (See diagram 3)

Diagram 1

Diagram 2

Diagram 3