Hooker Furniture 159590006ALTBK Assembly Guide

1/1

ASSEMBLY INSTRUCTION

ITEM# 1595-90006A-LTBK Mirror

1595-90002A-LTBK Eight-Drawer Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 1

This mirror can be assembled with two
kinds of dressers. Below are assembly
steps :

1. Insert locator dowels (B) to the pre-drilled

holes on wood supports (C ). (See diagram 1)

2. Place mirror on top of the dresser. Be sure to
position the mirror in middle of the top. The
back bottom edge of the mirror and the back
edge of the top should be flushed.

3. Attach wood supports (C) to the back of mirror
and dresser. Align locator dowels (B) on wood
supports to the holes on the back of mirror.

4. Tighten all screws (A) to the pre-drilled holes
on wood supports (C) by using Philips screw
driver.

Caution: Do not over tighten.