Hooker 5820-90019-84 Assembly Instructions

Diagram 1

Diagram 2

Diagram 3

ASSEMBLY INSTRUCTION

Item#: 5820-90019-84 Bed Bench

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people

Assembly Steps:

1. Put seat cushion upside down on a soft surface to prevent it from being scratched (See
Diagram 1).

2. Screw center posts (A) into seat cushion in clockwise direction (See Diagram 2).

3. Well place bottom frame (B) onto center posts (A) to make sure all pre-drilled holes are in
alignment. Tighten bun feet (C) into posts through bottom frame (B) in clockwise direction
(See Diagram 3).

4. Turn bed bench upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.