Honjet Technology H6500 Users Manual

H6500

Wireless Loader Controller

User Manual

Rev 1.0

Catalog

A. Brief Introduction.……………………………………………...………….1

B. Caution & Warning ………………………………………………………..1

C. Content of Packaging………………....……………………………………2

D. Function…………………………………………………………….………2

E. Learning Setting………………………………… ……………….………...3

F. Method of Operation………………………………………………….…….4

Appendix 1

Product Specs………………………………………………………………….4

Appendix 2

Obstacle Avoidance…………………………………………………………….5

A. Brief Introduction

H6500 Wireless Loader Controller is provided with not only a built-in antenna but
functions of learning and encoding. For users, it is very easy to set and use, and even
equipments and devices nearby can be controlled with free and easy with the help of a
receiver.

Purpose: Wireless transmission is adopted to control the performance of a pellet device.

Note: Any errors or omissions to be occurred in the future can not be guaranteed and

warranted in this manual. HONJET Technology Co., Ltd. is under no obligation for
any errors or omissions to be arisen, and reserve the right to make changes or
modification without notice.

B. Caution & Warning

Caution: the following H6500 and receiver will be referred to “machine” together for

short.

◎ If the battery connector is dirty before using, please use a clean and dry clothing to

wipe it out.

◎ The machine shall be stored in a dry place with good ventilation.
◎ If the machine will not be used for quite some time, please take out the battery to

avoid leakage of electricity, and store it in a cool, dry place.

◎ If the machine is dipped in water or exposed to a place with high humidity, it will

be possibly led to obstacles or broken.

◎ If the machine is hit or vibrated with violence, it will be possibly led to obstacles or

broken.

◎ If the machine has any something wrong or not in harmony, users should stop

using without delay.

Warning:

◎ Don’t cause the battery to be in a short circuit, dismantle or mistakenly assembly

the negative or positive poles of the same.

◎ Don’t let the battery contact water or wet.
◎ If smelling strange smoke or the machine is smoking, users should take out the

battery without delay.

1