Foxconn WFU03 Series
Introduction
Product Overview
The Foxconn WFU03 series wireless LAN module contains the Ralink® MT7601 single
chip which is a highly integrated MAC/BBP for 2.4GHz RF transmission and supporting
150Mbps PHY rate. It fully complies with IEEE 802.11 b/g/n feature rich wireless
connectivity at high standards, delivers reliable, cost-effective, throughput from an extended
distance. The optimized radio frequency architecture and baseband algorithms provide super
performance and low power consumption. Deploy a high efficient USB engine and hardware
data processing accelerators without overloading the host processor. Security, quality of
service and international regulation are supported by WFU03 series and giving end users the
greatest performance anytime in any circumstance.
Key Features
Legacy data rates 1, 2 in DSSS mode and rates 5.5, and 11 Mbps in CCK
mode, 6, 9, 12, 18, 24, 36, 48, and 54 in OFDM mode
Support 40MHz wide channel bandwidth
Uses the 2.412 to 2.497GHz ISM frequency band defined by the IEEE
802.11b/g/n specifications
Reverse direction grant data flow and frame aggregation
WEP 64/128, WPA, WPA2, TKIP, AES, WAPI
QoS-WMM, WMM-PS, WPS/WPS2, PIN, PBC
Multiple BSSID Support
Fully compliance with USB 2.0 high-speed mode
Form Factor: PCI Express 1.1 Half Mini Card(single side)
International Regulation – 802.11d/h/k
Supports Wi-Fi Direct
Low power with advanced power management
第 2 頁
Electrical Specifications
Pin Definitions
Table. Pin Definitions
Foxconn WFU03 Series
DC Specifications
The Max Power (as max defined in the Mini-card Spec) is 2000mW 667mA (need at lease
第 3 頁